And when will DFI appear in Euro ? I can not wait anymore :(
Printable View
And when will DFI appear in Euro ? I can not wait anymore :(
I'm not holding my breath, my guess is first or second week of Feb at the earliest. I hope I'm wrong.
next week in Italy so i hope in Europe...Quote:
Originally Posted by xs64
next week it will also in germany arrive. check out hpm-computer
So next week i will have it :banana4: .......Quote:
Originally Posted by Klosti
Congrats man, real nice!Quote:
Originally Posted by OPPAINTER
Guys clearance on the chipset to ATI card is tight, but it does fit as long as the board is now bent.
I know the chipset gets warm so water may help although I have had no issues. I do know DD are working on a block for it ;)
Awesome to see OPP bank on form, were you using our dimms there m8?
Regards using the 5V Jumper emabled, the mosfet has a heatsink on it and at 3.4Vdimm it was showing 75+C for me on full load, this to me means get sone cool air blowing on it ;)
Guys, I understand it shouldn't be much longer for shipment. A last minute hardware change and bios update to the shipping boards is being made to smooth out performance.
Oppssss.....slip of the tongue there Tony, tired also I suspect working on to many boards at the same time....ATI in this case probably means DFI...lolQuote:
Originally Posted by bigtoe
Actually tony is reffering to the clearance from the chipset fan to the PCB on the ATI pci-e card. Opp had a problem because his board was warped from the Evap head mount.Quote:
Originally Posted by Blindbat
Oppsssie my bad, I guess I'm the one tired and did not read properly..lolQuote:
Originally Posted by trans am
[QUOTE=bigtoe]
Awesome to see OPP bank on form, were you using our dimms there m8?
QUOTE]
Here's specs for me last run last night.
42879
DFI NF-4 SLI DR mobo,, FX-55 at 266x13,, 2x512 OCZ VX at 266MHz 2-2-2-5,, 1xMSI RX800 at 799/659
OPP
Here's specs for me last run last night.Quote:
Originally Posted by bigtoe
42879
DFI NF-4 SLI DR mobo,, FX-55 at 266x13,, 2x512 OCZ VX at 266MHz 2-2-2-5,, 1xMSI RX800 at 799/659
OPP
HPM-COMPUTER.DE is getting it from DFI Netherlands the 26th. The expect shipping to begin the 29th.Quote:
Originally Posted by xs64
Nice OPP... Brian and Jacob are behind you with a crappier board :D
Is it neccessary or is it useful to cool down the chipset to -40°C? Or doesnt matter this? I ordered my dfi nf4 ultra last week :) I hope it rocks with my bh5 sticks!
Is the "chipset" the same size as regular "NB" with same mounting holes? Could someone verify the height between the top of chip and bottom of vid card. It would be helpful so we can start getting parts now. Would a 20mm tall block fit that had water ports on the lower portion of block as to not interfere with the card? Copper is act. 10mm.
You will want the water ports to come out centered between TWO video cards, so it can handle SLI, also needs to take into account the impact of any heatsinks on the videorams.
Same for the water blocks on the GPU's. the top card GPU block needs to not interfere with the bottom cards backside ramsinks.
Even if ATI takes a while to get SLI-ness functional, 2x X800 would make a cool 4 monitor desktop setup a snap. Even more nasty would be two Apple 30" LCD's each powered by one X800 card.
looking here, http://www.xtremesystems.org/forums/...389#post676389 , (it is all I have to go on), it seems there may be enough room above the lower card if someone was running two. Also (the orientation part I have not got to), the hose may be able to go to the back. Height seems to be the unknown. ***edit: I see what you are saying, about possible caps etc. being on top of the lower card....
:lol: that will need some times to do thatQuote:
Originally Posted by diamonddog
the clearance are to small even for standard chipset cooling fan....
then what do you think .... with an evaporator block? :confused:
no waterchill with ethanol as I cool my nb and graphicscard on my nfII ultra infinity
is the vx doing any better on this board? or is it exactly the same?Quote:
Originally Posted by OPPAINTER
799/659? Holy crap! mine max out memtest stable at 265, but this is on single channel 754 DFI rig. I have yet to try them in dual.:toast:
Hey,
Just wondering what 3200 Dual 2x512mb Ram would work good for this board for $240 or cheaper?
Thanks!
If you don't plan on o/cing(don't know why you would want this board if not), get some value ram from corsair, kingston, mushkin etc.
If you want to o/c my suggestion is G.skill pc4400 LE 1gb, just wait one more pay period, can be had for about 270 shipped at the egg.
OPPAINTER,
Small favor to ask, if you have the time and processor.
Is it possible for you to try a Winchester under cascade and the DFI nf4, and be kind enough to let us know if it works or if the famous ''winchester under phase change'' problem is also present with the DFI?
Last item for me to order is the processor and I wonder if I should go 3500+ NewCastle (until such time as Venice is out and hopefully not having the same problems as winnie), I will be using it on a modest Vapochill XE II.
OK cool,
If im not overclocking with this board.
Will this Kingston
http://www.us.ncix.com/products/inde...cture=Kingston
have a huge advantage over the ocz if not OCing.
http://www.us.ncix.com/products/inde...Z%20Technology