Official Winchester OC Thread!

Printable View

Show 100 post(s) from this thread on one page

12-08-2004, 08:08 AM
klootzakje

didn't do superpi... i'll try it later today :) on 1m? or 32m? or other? :)
12-08-2004, 01:23 PM
funkflix

Some Primeaction! :)

http://people.freenet.de/funkflix/prime2830.jpg

http://people.freenet.de/funkflix/prime28302.jpg

Maybe it works with less Vcore, but i've not tested it! I'm tired
of Prime ... hours of waiting! ;)
12-08-2004, 02:14 PM
klootzakje

pfff i borrowed a friend his 2 x 256 mb noname cl3 :S what a drama, can't even get my system bus on 270 with 100mhz divider somehow... :S i'll do superpi tomorrow, if i'll have my ram back then ;)
12-08-2004, 03:39 PM
amilian

2 Attachment(s)

Here's early days....but it seems I'm hitting a wall at 270HTT with tight timings..... clock too low with the 250fsb, and 270HTT too low to get better than 35sec 1M SuperPI. Gonna have to get a 3200 for the 10 multi.....
12-08-2004, 04:53 PM
andyOCZ

Quote:

Originally Posted by GravediggA

Some Primeaction! :)

http://people.freenet.de/funkflix/prime2830.jpg

http://people.freenet.de/funkflix/prime28302.jpg

Maybe it works with less Vcore, but i've not tested it! I'm tired
of Prime ... hours of waiting! ;)

Nice, but my 90nm always errors P95 at about 3.5hrs tops. Run it all night for us.

Thanks!
12-08-2004, 05:02 PM
bachus_anonym

AndyOCZ, you said all night??? ;) how about 15hrs ???
http://www.xtremesystems.org/forums/...1&postcount=91
12-08-2004, 05:10 PM
OCForums_Osirs

Here is mine... not too bad I guess, but Always room for improvement...

2.8ghz - http://www.sevenlabs.net/a64/2.8.jpg
2.75ghz - http://www.sevenlabs.net/a64/2.75.jpg
2.7ghz - http://www.sevenlabs.net/a64/3000.jpg
2.6ghz with 1:1 - http://www.sevenlabs.net/a64/2.6_memory_TCCD.jpg
12-08-2004, 05:15 PM
andyOCZ

Quote:

Originally Posted by bachus_anonym

AndyOCZ, you said all night??? ;) how about 15hrs ???
http://www.xtremesystems.org/forums/...1&postcount=91

GROOVY BABY!!! :banana4:

I guess the week 41's may be the good stuff. The earlier ones are not running P95 Blend at all from what I have seen.

Thanks.
12-08-2004, 07:59 PM
stelleg151

GOLI what week is your chip, and is it stable at that speed?
12-08-2004, 10:27 PM
Goli

Quote:

Originally Posted by stelleg151

GOLI what week is your chip, and is it stable at that speed?

I don´t know what week is my chip, but when i take off the waterblock tomorrow i will tell you, now i am full stable at 2750Mhz but i have some error in Everest home edition and Sandra i don´t know why, anyone knows?

here are some SS:

http://img125.exs.cx/img125/2333/cpuz3zn.th.jpg

http://img125.exs.cx/img125/8162/everest7zv.th.jpg

http://img125.exs.cx/img125/7898/sandra4qj.th.jpg

http://img125.exs.cx/img125/9928/sup...tral1ya.th.jpg

Anybody have the same thing, that is showing some errors in some softwares?
12-09-2004, 03:08 PM
Mrki

http://mitglied.lycos.de/siedl/0441%...perpi32sek.jpg
12-09-2004, 03:35 PM
DevilsRejection

Goli is that ram at 1T?
12-09-2004, 04:04 PM
Mrki

sure ... 2T want be 32sek pi!
12-09-2004, 04:22 PM
Mana

hehe 2T at 32s, htt = 400? :)
12-09-2004, 04:37 PM
pazza316

Vapochill with MSI Neo Platinum and Winni

has anyone got this combination working effectively yet. i have heard their is a beta bios out to sort the low temps problems with Winchester cores on the MSI board. If anyone has got a winni working at sub zero please post a solution
12-09-2004, 04:39 PM
Goli

Quote:

Originally Posted by DevilsRejection

Goli is that ram at 1T?

Yes is 1T
12-09-2004, 06:02 PM
Goli

Quote:

Originally Posted by stelleg151

GOLI what week is your chip, and is it stable at that speed?

Ok now i have the stepping of my chip how i know what week it is?

ADA3000DIK4BI
CBBFD 0441SPMw
1077009K40333
12-09-2004, 07:15 PM
OCForums_Osirs

your chip is made in te 41st week, 2004
(0441) - my chip is 0437
12-09-2004, 07:38 PM
bachus_anonym

Quote:

Originally Posted by pc ice

i have a 0444 3500+winchester that is pretty good i think..it can do 2.880 bechable at 1.6v on air..
i put it on phase change for testing and it stops fuctioning at -115c completly stop's..
i have tested 4 chip's now and all are the same -115c and no go...
-50 holding seem's to be the top coldness these winchester's want.
-30c holding seem's to be perfect temp..i can bench my chip 3.1ghz on my gigabyte k8ns ultra wich isnt the best any way's..so i imagine on the msi it might do 3.2/3.3 ghz..
ill post some pic's of every thing after i switch them over to my other pc.

i'll be sitting on the edge on my chair waiting for your adventure with Winnie + Neo2 :) hopefully i'll be putting mine under phase change soon so need to see your experiences with this setup...
12-09-2004, 10:03 PM
amilian

@goli,
which waterblock you got? and what are your temps?
thnx.
12-10-2004, 01:03 AM
FX Freak

wah is the maximum stable with you cpu with 1,6v @air?
can you say me your full stepping?
12-10-2004, 05:36 AM
Goli

Quote:

Originally Posted by amilian

@goli,
which waterblock you got? and what are your temps?
thnx.

I have custom waterblocks made it by me and a friend of mine, here are some pics of my waterblocks, i have a temp of 45° full load at 1.65V core with a room temp of 27.

http://www.watercooling.cl/modules/n...php?storyid=62

There are some of my blocks :D
12-10-2004, 05:57 AM
amilian

Quote:

Originally Posted by Goli

I have custom waterblocks made it by me and a friend of mine, here are some pics of my waterblocks, i have a temp of 45° full load at 1.65V core with a room temp of 27.

http://www.watercooling.cl/modules/n...php?storyid=62

There are some of my blocks :D

Nice work and nice temp.
Which retail block would yours currently equate to? I'm trying to get an idea of how my Maze 3 would do, and how well a Zalman7000 air solution would compete with water at 1.65vcore at the same clock speed.
Thanks.
12-10-2004, 06:50 AM
Goli

Quote:

Originally Posted by amilian

Nice work and nice temp.
Which retail block would yours currently equate to? I'm trying to get an idea of how my Maze 3 would do, and how well a Zalman7000 air solution would compete with water at 1.65vcore at the same clock speed.
Thanks.

I don´t know very well, here in Chile we didn´t have any retail watercooling system to test, so is dificult to compare my waterblock with some other one.

With the Zalman 7000 maybe you can reach 2700Mhz and a CPU temp of 50-55 full load think.
12-10-2004, 07:07 AM
amilian

Quote:

Originally Posted by Goli

I don´t know very well, here in Chile we didn´t have any retail watercooling system to test, so is dificult to compare my waterblock with some other one.

With the Zalman 7000 maybe you can reach 2700Mhz and a CPU temp of 50-55 full load think.

OK, thanks for that estimate. I'm thinking about the same, and that it's not going to be good enough for this chip. It likes temps under 50. I think I'll put my watercooling on it as soon as I get the right block.....my maze 3 doesn't fit.....
Anyone know a good mod for it to make it fit?

Show 100 post(s) from this thread on one page