bh5 steppping database

my winbonds :) :
bh-5 khx3000 256mb 257mhz 2-2-2-11@3.3v (i must check week)
bh-6 twinmos pc2700 256mb 253mhz 2-2-2-11@3.3v (4 chips 0307week, 4 chips 0308week) lol :D

all test's on dfi infinity; bypass, cpc etc on :D

My bh5 vio 3.9v (vddr 3.8/3.9v) (We0313)

http://www.membres.lycos.fr/boblemag...cpumark340.PNG

http://stephen.mounioloux.free.fr/Ov...TA_BH5/BH5.jpg

307WE

i865PE : 2 2 2 5 (Dual) 260MHz (superpi) @3.75 V

http://www.all4amd.netfirms.com/ that is the ram that mushkin sold back in November2004. i need to remove the heat spreader and c what chips its got

256MB Infineon 6a BH6 233MHz 2-2-2-5 @ 3,0v @ DFI infinity
512MB Corsair XMS2705v1.1 BH6 240MHz 2-2-2-5 @ 3,1v @ DFI inifnity

*edit*
ups, week follow soon!

*edit2*
hmm, dont know, infineon 6a stickes are relabeled

Really nice sticks you got there, my German fellow :D

I am impressed what this Infineon is able to do!

4x256MB A-Data Winbond BH5 306we

227mhz@2.80v vdimm on Abit IS7 (i865PE) cl2.0 2-5-2-2 dual channel & PAT FULLY enabled

235mhz@2.85v vdimm on Asus P4P800 (i865PE) cl2.0 2-5-2-2 dual channel & PAT FULLY enabled

I've to do the vdimm on IS7 to supply higher voltage than 2.8...
I think that @3.0v vdimm these chips will "pass" 240-5mhz bus...
bye bye


Crim

EDIT: tested on an IC7-Max3

250mhz@3.1v vdimm cl 2.0 5-2-2 dual channel

KHX PC3500 BH-5 2x256mb
All chips in the first module are 314WE, the other module has 314WE on one side and 315WE :stick: (they are double sided).

LP NF2
2-2-2-11 3.3v 263mhz CPC Off
2-2-2-11 3.3v 255mhz CPC On
2-2-2-11 2.9v 230mhz CPC On

Greetings :)

why CPC OFF with 256 modules ?

woa! nice :D many new entries, thx a lot guys! :D

will update the db in a week or two when i have internet @home again :)

Got a couple of sticks for your most excellent database saaya :)

Corsair XMS PC3500 V1.1, 2 X 256 Meg (all BH-5)

Stick #1 - all 8 IC chips are '310WE' BH-5
Stick #2 - 4 IC chips are '310WE' BH-5, and 4 IC chips are '322WF' BH-5, the two sides of the stick are different :stick:.

322WF is an as-yet unreported stepping too - weird huh? :). If you want, I can take a picture of the chips to verify them. Although I can't really take a picture that proves that each side of the stick is actually different.


Anyhow, these two sticks do 260 MHz 2-2-2-11 in dual channel, with 24 hour memtest86 test #5 looping stability, at 3.6V of VDIMM, in my old DFI Ultra Infinity nForce2 board.

They could probably do a good ~5 MHz higher, if stability testing was only done with Prime95 ;) :D

I am also confident that they will do much better in an nForce4 board, with just a little more voltage :D

thx a lot felinusz, JuanFlaiter, Crimson_dAWN, arbiter, HermS and pershoot :toast: :toast: :toast:

SheeP, please at least post the stepping info from aida or cpu-z :)
zytrahus, 256 or 512mb? you got two sticks, right?
boblemagnifique, what manufacturer is that? 100% prime stable? :slobber:
MaSell, whats the full week stepping? i need the two letters behind the week stepping :)
ShadowScorpion, i suppose your using an nf2 board?
iddqd, i need the stepping infos ;)

thx zytrahus, results added :toast:

Quote:

---

Originally Posted by saaya

thx a lot felinusz, JuanFlaiter, Crimson_dAWN, arbiter, HermS and pershoot :toast: :toast: :toast:

SheeP, please at least post the stepping info from aida or cpu-z :)
zytrahus, 256 or 512mb? you got two sticks, right?
boblemagnifique, what manufacturer is that? 100% prime stable? :slobber:
MaSell, whats the full week stepping? i need the two letters behind the week stepping :)
ShadowScorpion, i suppose your using an nf2 board?
iddqd, i need the stepping infos ;)

---

Hmm, I was sure that I posted the stepping in the previous post somewhere... but the BH-5 is 338WE. Don't remember what stepping BH-6 is, though.

thx boblemagnifique and iddqd :toast:

added your results :)

Yes im useing an Abit NF7-Sv2

"thx a lot felinusz, JuanFlaiter, Crimson_dAWN, arbiter, HermS and pershoot"
;) :toast:

Quote:

---

Originally Posted by arbiter

kingston hyperx 3500 (week 17 year 03)
ksn neo2
ddrbooster 4v :D

http://img118.exs.cx/img118/6536/s2q10x2828klow.jpg

---

Special thanks to arbiter.He is my friend and I used his excellent memories in my fx55 benchmark studies. :toast:

http://forum.donanimhaber.com/upfile...z811754310.jpg

http://forum.donanimhaber.com/upfile...n364514142.jpg

My Corsair PC3500C2 2 x 256MB 3,72V.

http://www.weber-steuerungstechnik.d...ock/277mhz.jpg

what steppings are those chips? did you remove the heatspreaders? can you post the aida32 infos if you havent?

Everest/Aida/CPU-Z don't show me any information about that. :(
Maybe i take the spreaders off today or tomorrow.

Here we go. :)

http://www.weber-steuerungstechnik.d...corsairbh5.jpg

ohhhhh nice! its a special week stepping :D

Twinmos BH-5

1x256 -->304WE \ W942508BH-5

1x256 -->307WE \ W942508BH-5


http://img.photobucket.com/albums/v231/Fosco/27sek.jpg

This is with 3.8v


The best one did 282 MHz in a DFI 754

http://img.photobucket.com/albums/v231/Fosco/282mhz.jpg

Quote:

---

Originally Posted by saaya

ohhhhh nice! its a special week stepping :D

---

Why special? :D

Quote:

---

week 45
"2432D" 2.0-2-2 3.70v 275mhz (corsair 3500 256mb@nf3)
"2432D" 2.0-2-2 3.70v 275mhz (corsair 3500 256mb@nf3)

---

It's not 2432D .. it's 2452D ! ;)