MaximusIV-Extreme Thread

I make wallpapers ;) how do you like?

http://img69.imageshack.us/img69/284...seba842005.jpg

Quote:

---

Originally Posted by Splave

probably not worth keeping as I havent heard of success with STT. I have the 2000c7 project-X and it is a no go for 32m

---

well I figured, my 2200c8 are the same as well, on all the boards I tested.

Quote:

---

Originally Posted by l0ud_sil3nc3

really so you just need the dank, no schwiggity schwoo, I bet GTX2's would do great then.

I have a set of STT 2000c7 that I am trying to sell and they are new, is it worth keeping them and trying them out?

---

Not really, I have GTX2 and I hardly run it on 2133MHz for Spi 32m. 7-7-7/8-8-8 above 2160 is really hard

Quote:

---

Originally Posted by LardArse

Here is a double edged sword, tip for maximizing bclk/yet the wrong setting can produce CPU sensitivities to '00' at resets etc :

http://g.imagehost.org/0393/skew.jpg

First set Skew driving voltage to 1.04v, set bclk skew to 0 , rest of skew to auto and start pushing bclk to find limit.
next set Skew driving voltage to 1.04v, set bclk skew to -8 , rest of skew to auto and start pushing bclk to find limit.
next set Skew driving voltage to 1.04v, set bclk skew to -12 , rest of skew to auto and start pushing bclk to find limit.
if bclk is increasing going to -12 then slowly lower skew driving voltage from 1.04v to try to max bclk again.

for reducing bclk First set bclk skew to 0 , set Skew driving voltage to 1.04v,rest of skew to auto and start rewducing bclk to find limit.
next set bclk skew to +12 , set Skew driving voltage to 1.04v,rest of skew to auto and start rewducing bclk to find limit.
if bclk is redusing going to +12 then slowly increase skew driving voltage from 1.04v to try to reduce bclk again.

---

Thanks was stuck failing to boot at 107, set -8 and 1.04 and now 32m running at 107.2 :)

well i am stuck at 106.7
i clock every 25mhz on dram

been trying for 107.8/107.9 to get 2300mhz

hmm the i/o skews seems to change when i change dmi A/B skews.

and the rtl thingy seems cant run anymore other than 14.

Quote:

---

Originally Posted by seba84_2005

I make wallpapers ;) how do you like?

---

Nice seba! :up:

Quote:

---

Originally Posted by l0ud_sil3nc3

well I figured, my 2200c8 are the same as well, on all the boards I tested.

---

My AData 2200C8 is best at 2133 7-8-7 only, at an insane high vdimm 1.825v. 7-7-7 is no go.
DomGT 2000C7 works like charm at 2133 7-7-7 @ 1.72v

So... 16x/16x with NF200 has better performance than native 8x/8x???

Very nice seba :up:. Are you taking any requests on the wallpaper?

Personally I'd like one in 1920x1200 with just the RoG logo in the middle and not the board on the lower right. 2560x1440 and 2560x1600 would be nice for future-proofing as well.

-sf

Quote:

---

Originally Posted by sfxs

Very nice seba :up:. Are you taking any requests on the wallpaper?

Personally I'd like one in 1920x1200 with just the RoG logo in the middle and not the board on the lower right. 2560x1440 and 2560x1600 would be nice for future-proofing as well.

-sf

---

+1 2560x1600 :up:

There You go ;)

1920x1200 RoG logo only in the middle:
http://img831.imageshack.us/img831/5...inglero.th.jpg

2560x1600 RoG logo only in the middle:
http://img191.imageshack.us/img191/3...inglero.th.jpg

1920x1200 fixed.

Very nice again; (edit: thanks for the quick fix).

-sf

Quote:

---

Originally Posted by seba84_2005

There You go ;)

1920x1200 RoG logo only in the middle:
http://img831.imageshack.us/img831/5...inglero.th.jpg

2560x1600 RoG logo only in the middle:
http://img191.imageshack.us/img191/3...inglero.th.jpg

1920x1200 fixed.

---

Hey, make a 1920x1080 also, since that's the native resolution of most 1080 LCD/LED monitors these days.

No problem :up:

http://img222.imageshack.us/img222/3...4200519.th.jpg

http://img52.imageshack.us/img52/554...inglero.th.jpg

So you gonna allow people to download it/them and use as wallpaper, is that your plan?

Has anyone tried the latest/new BIOS? :) How is it compared to the recent 1101?

1303 best so far :)

my luck.. i buy P8P67 Deluxe B3 last week and i can run my Hyper 2133 7-8-7 @ 1.725v n 2133 8-8-8 @1.6v (24/7), this is my 2nd board that can run my hyper go to 2133, my first board was UD7 that can too... other board like P67 pro, Giga UD4 or Asrock Fatality failed to run my Hyper to 2133 :(

+1 for Asus P67 Deluxe B3 :up:

http://img861.imageshack.us/img861/6154/corsair.jpg

http://img638.imageshack.us/img638/3853/55ghz2133c7.jpg

1485 is out

http://www.kingpincooling.com/forum/...t=1041&page=14

Changed some memory stuff
added Memory timings:
I/O Latency + RTL Offset

can play with it with oc memory...

Hi

i show 1.38V CPU for 5000Mhz

but me have 1.45V CPu for 5000Mhz

how do that on maximus 4 ex ?

the P8P67 deluxe is better than maximus 4 ex ?

i have number on CPU : L101B540

Thanks ;)

Sorry for this being off topic but i have this board and a MM 10 slot pci case and would like to fit 2 Asus GeForce GTX 570 DirectCU II to run in sli recon they would fit ok?

they will fit but 1 will be in a x8 slot I believe

2x NF200 pcie will run SLI at x16/x16.

Both 470s are double slot and have a nice gap between card`s but the 2 slot card`s will be to close i think and will maybe overheat them.

Hi

i have a question for a choise (memory) on M4E

the best kit 2x4Go ?

corsair DOMINATOR GT pc 16000 cas 8 9 8 24
or
[ Ripjaws-X ] F3-17600CL7D-4GBXHD cas 7 10 7 27

thanks

What software do you guys recommend to stress-test the cpu?. I have been using Prime95 for ages now and want to use something else. Maybe something new "on the marked"...I feel that running small fft is just overkill and not beeing nice to me at all :D
Or is it still Prime95 wich is the main test software?