Printable View
Ok; The biiiiig regions in Europe are done!
From Nordics (Denmark, Norway, Sweden, Finland, Iceland);
Elmor
DACH (Germany, Austria, Swiz);
BenchBros' kabauterman
And from the region with the horrible language; (Dutch)
Viss
BEST 1M;
Mr.Banana + beer
Best wprime;
David
Congratulations to the winners!
Congratz all, go go Bart !!
Horrible language, but far better looking then you lot :p
He always tells THC and Me, GBT rocks (might therefore he won fanboy show), so shocked to see such screen :p:Quote:
Originally Posted by Gautam
He is writing on danish and bragging about He is on a early BIOS and comparing that He have better PP than a 32m run with R3E with BIOS 0045.Quote:
Originally Posted by dinos22
I think Marc screwed up his GT cpu with all that high speed ram exploring...
or did he loose his touch :p
Spill the beans Oliver , I am sure you know the truth ( even if it's ugly tell us :p ) Ow yes don't forget to tell Marc to keep on pushing it :p
Bragging?Quote:
Originally Posted by Oliver
Not bragging at all, and if so, not about the performance of the ghetto unlocked BIOS for UD3R, the one and only BIOS for rev2.0 doesnt support B1 ES....
I do remember something about what would be 6 sec faster run on the 32M (R3E), that stopped in 21th loop because the chip wasnt kept cold enough? Just saying; If I want a good run, I will make one - if I dont, then I dont :) (And you have witnessed that in person)
PS: Didnt insist on pushing further as the best time I made with Massman being awefully bad cheerleader at AOCM was 6 min 14 sec, and nah, didnt bother saving that crap.. I wont submit anything above 6 min... (5800'ish freq, but uncore was 4600mhz?)
To be honest .... that 6min 14 was still pretty bad efficiency. There's a reason why I was making fun of you :D.
On topic: total amount of submissions in Nordics/DACH/Benelux area was ... 5! 60% got qualified, in other words.
Are you sure?Quote:
Originally Posted by massman
Isnt it just top5 listed? Basicly that means I could have posted stock clock scores and got a board? oh bummer! :p:
EDIT: AND hell yeah I know it was; Why do you think I didnt tell you when you woke up !? I was ASHAMED !!! ;)
Would be have fun to see the outcome, if UD9 had been available a little bit more and eventually another price point.Quote:
Originally Posted by massman
I actually hád the UD9 (rev0.2 ... UDP7), but it didn't lead me to victory. It's all about the CPU.
PICS OR IT DIDNT HAPPEN !!!Quote:
Originally Posted by massman
UDP7, are you sure? ;) :D :p:
I heard of UD7P, but not UDP7
/ass-revenge mode off
I certainly didnt expect this to be enough but it seems it is :D
http://img.photobucket.com/albums/v2...wPrime_32M.png
http://img.photobucket.com/albums/v2...SuperPI_1M.png
Portuguese online qualifier starting soon :up:
Viss, why did you use dual-channel in the SuperPI runs?
http://hwbot.org/blog/wp-content//test2.pngQuote:
Originally Posted by M.Beier
UDP7 ...
Not a real reason, must have lost a slot at that point.Quote:
Originally Posted by matose
Nice Job Bart!!! Congrats!! Have fun in Mallorca!!! :up::up:
sheesh if you are going to be benching pi at least put a proper bios on there :p:
never mind the lack of other stuff needed hehe
The statement, is solely based upon the GOOC competition, where only GBT boards are allowed.Quote:
Originally Posted by massman
I benched, I submit ... and thén you guys give me the bios :p:Quote:
Originally Posted by dinos22
bios is in my sig
mi bios e su bios :rofl:
Shouldn't that be "Pi bios e su bios"? :help:
donno ur the smart one
im just going off the mi casa e su casa phrase but actually the opposite is true....when do i get to collect my keys? :rofl:
... working on it ...
Gratz Bart :D
Yesterday we had the finals in Romania. The scores were pretty tight and everyone had some problems with strange mobo behavior or crappy CPU (I had CBB at -60 and CB at -95 :D). Here are the results:
1) matose
2) Monstru
3) kagula323
4) Iraqi_Freedom
5) DiaboRO
The top scores (me & Monstru's) were at about 5300MHz WPrime and 5600MHz SPI on Q4EG (B1 ES). In the first hour I didn't even manage to get into Windows on LN2 at any setting about stock; the problem was the VTT voltage which was causing the board not to boot over 1.24v. Also, with no VTT voltage => no high uncore frequency => no high bclock (160MHz was imposible) => no high memory frequency (1600MHz also imposible). Keeping the CPU @ 25 degrees C the IMC was OK but on subzero it went nuts :). So I was stuck with 133-135MHz BCLK and 1333MHz CL9 / under 3GHz uncore... 39x multi in WPrime and 41x multi in SPI1M did the trick pushing the CPU Voltage and BCLK to 135Mhz or so. Better score efficiency made me win both SPI 1M and WPrime 1024M. The OCP was good for SPI 1M (1.82v without any problem) but in WPrime1024m anything over 1.7v was instant shutdown :)
Monstru did his results in the first hour and after he pushed the SPI 1M to the limit, his platform died and he lost the last hour trying to make it boot again.
I will meet you all in Mallorca ;)!