Hi Bigtoe . Is there a way to have the multipliers enabled in the Asus P4GD1 for Dothan .
Latest bios :D
Printable View
Hi Bigtoe . Is there a way to have the multipliers enabled in the Asus P4GD1 for Dothan .
Latest bios :D
we post in this thread and get no reply
I second that. Although multis in bios would be nice, PCI-E/PCI locks would be even better!!! :)Quote:
Originally Posted by toledo
Hey Bigtoe, any chance of adding some higher vdimm in the P4P800-X bios?
atm it only goes up to 2.65v and thats nothing really, also agp voltage would be nice aswell.
Cheers, i'd worship you if you could do this for me lmao :D
Cleaned the build up a little, renamed a few options to make them easier to understand and set the bios defaults to be more friendly at boot.
Rgone loves this build already...thought i would share here ASAP, he says its much better than anything he has tested before.
Grab it here
Its tested as good if you have the need to play, post here if you like the build.
I do come over here but you guys need to understand a few things.Quote:
Originally Posted by xfxlover
I can only tweak what is already there, I dion't have a bios compiler so adding voltages or ratio's etc will not happen. I can change memory tables etc but normally there is no need...the reason?
most motherboard manufacturers set their bios defaults to tight, this is for review purposes to make their boards look good. all i hvar to do is set what i know is sweet timings to get a good boot wjile overclcoked and the bios is transformed...this is all i usually do.
now, if the bios has hidden options i can unhide, I can not add without recompiling...major headache without the right tools ;)
Quote:
Originally Posted by bigtoe
what all is needed to add these options in the bios?
Dfi doesnt have any tools you can use? :P
can u do what u do best -unhide and optimise my bis please? Id do it myself but I have no clue. Here is a link to my bios, the one with .F6 at the end after extracting the files... please help me out?Quote:
Originally Posted by bigtoe
http://asia.giga-byte.com/MotherBoar..._k8nu-9_f6.exe
bigtoe, how do I enable these options in BIOS, I see them in _EN_CODE.BIN but somehow they don't show up in MODBIN6 :(
DRAM Bank Interleaving
Burst Length
8 beats
4 beats
2 beats
Enable All DIMM slots clock
Large Memory Simulation
Disable
4GB
And I'm not sure about the following settings :
Bank Interleaving interlock
At Least not
All Present are ???
Node memory Interleaving
Node Interleaving interlock
I'd like to enable Burst Length option cause my board freezes when I disable 32 byte granularity...
Thanks Bigtoe. Important question on this bios however. Does it still contain the vcore issue of the original 704? Are all voltage options above 113% been disabled or is that all fixed up now? I have never been able to try 704 because of the vcore bug as I need 123% and it was disabled. I hope to hear back from you soon and with good news that all voltages are selectable again otherwise I will have to do without. Thanks.
thanks bigtoe - d/l and testing ...........now
It has up to 113%
figured so. Yet again this bios isnt for me. I have no clue why after 2 months the bug wasnt fixed that allows you to use vcore properly like every other bios.
*sigh,
anyone else out there have issues where their system will just not work if the ram is in the yellow slots? For me, right when verifying dmi pool data should be showing the post halts and goes into an endless reboot cycle. Really annoying. Any ideas?
Thanks Tony.
Hello,
New here, but I caught the request for a linky to original BIOS.
asus a8n sli premium, I grabbed up the 1006 bios because I was having stability issues with the latest nvidia chipset drivers
http://dlsvr03.asus.com/pub/ASUS/mb/...m/A8NSP006.zip
I remember reading that this guy has vcore up to 1.65 but with my a64 sandy I only see up to 1.55, makes my peltier sad
the new 704-2BTA BIOS sucks for my set up.
I have reversed my VX to the worst combination
i.e. 3.2v id get 245 winmemtest stable when memory is in good order, 235 when in bad order (swapped) this was with 704-2 original.
Now with 704-2BTA I cant get 230 stable with 3.2. i think im going to go back
hi bigtoe...someone did mention the epox9nda3j around here...anything else u can do to it? unhide some options of sorts?
i'd ask you to find a way to make this damn board do 1t with tcxx RAM, but no one's a magician :(
Hey bigtoe, had a chance to look into the P4P800-X bios yet, im sure some vidmm options must be "unlockable", i would do it myself but i dont have a clue how.
Cheers please please, ballistix is coming tomorrow so i need vdimm :p
I am modding the bios on my emachine w2888. Really, the modification is only to replace the oem string with the retail string so that I can upgrade to the latest retail bios for my board. the problem is the bios is locked, and is refusing all attempts to flash. Even recovery mode won't touch it.
Probably a long shot but anybody know of a modded bios for a Msi K8t neo-v?
hey guys
Does anybody knows a modded Bios or a way to set free the mulitbler on this board for CT479?
I cant beleave , that i had better bioses from Asus for the cheaper P4p800-SE then for this Board :(
bigtoe, can you recommend the best way to "ask" Asus to release a multi-supporting bios for the P4GD1?
Its my impression that you sometimes have something to do with the release of new bioses and I thought we might benefit from your experience...
Which email-addy should we send our distress-call to?
PM me if you have anything useful to say about this.
If you haven't got the time - no sweat :toast:
Hi Bigtoe,
Can you modify this ASRock K8Upgrade-NF3 BIOS
http://www.asrock.com/support/bios/K8UNF31.10.zip
for it to have the VCore option always enabled coz its grayed and disabled for Processors without Cool-N-Quiet feature.
Thanks and more power!