The E0 Q9550 SLB9V thread (finally!)

Printable View

Show 100 post(s) from this thread on one page

07-23-2009, 04:01 PM
bigwill68

Quote:

Originally Posted by Dadi_oh

I thought I could attach images directly but looks like I have to host them somewhere. Will post images when I get that sorted out.

do some imageshack shot and post your cpu-z specs link brother:up: what memory you running on that I45?

Quote:

Originally Posted by Dadi_oh

I would post a screen shot but this forum doesn;t allow me to upload images directly. I registered on imageshack and been waiting 4 hours for their confirmation email. Anyone recommend a faster response image hosting site?

Try Photobucket my friend link below and hope your saving your images as jpg or you doin it png?

http://photobucket.com/
07-23-2009, 04:06 PM
Dadi_oh

Quote:

Originally Posted by bigwill68

do some imageshack shot and post your cpu-z specs link brother:up: what memory you running on that I45?

I regsitered on imageshack and still waiting for a confirmation email 4 hours later :(

My memory is 2X1GB OCZ Gold PC2-8500. It is older stuff... Binned Micron D9's.. takes 2.4V to get to rated 1100MHz speed at 555-15.
07-23-2009, 04:06 PM
OC Nub

Quote:

Originally Posted by Dadi_oh

Oh. Looks like I was using an old version of RealTemp. Downloaded the latest and now it shows min VID =1.1000 and max = 1.2500. Does this mean my VID is 1.1000 only when running C1E power savings and 1.25V when running full power?

I would post a screen shot but this forum doesn;t allow me to upload images directly. I registered on imageshack and been waiting 4 hours for their confirmation email. Anyone recommend a faster response image hosting site?

That means your VID is 1.25v
07-23-2009, 04:07 PM
Hoss331

Quote:

Originally Posted by Dadi_oh

Oh. Looks like I was using an old version of RealTemp. Downloaded the latest and now it shows min VID =1.1000 and max = 1.2500. Does this mean my VID is 1.1000 only when running C1E power savings and 1.25V when running full power?

I would post a screen shot but this forum doesn;t allow me to upload images directly. I registered on imageshack and been waiting 4 hours for their confirmation email. Anyone recommend a faster response image hosting site?

max is the one you go by, so you have a 1.25vid chip
07-23-2009, 04:10 PM
Dadi_oh

Quote:

Originally Posted by Hoss331

max is the one you go by, so you have a 1.25vid chip

Oh sure. Shatter my miserable dreams :D

Either way I am happy to be over 4GHz on air with <1.3V and haven't really started playing with OC settings yet.

Will post if I can get on image shack sometime tonight...
07-23-2009, 04:12 PM
Kashelz

Just got 50 loops pased Intel Burn test @ 450 x 8, damn, this chip looks like love high PLL voltage :eek: Still 1.4 fsb voltage (will try lower) + 1.7v PLL, messured the PLL with multimeter and it showed 1.738v under laod, how long do you think this chip will be live? :> :ROTF:

If it dosnt overclock, well, then it must be dead :p:
07-23-2009, 04:13 PM
Hoss331

Quote:

Originally Posted by Dadi_oh

Oh sure. Shatter my miserable dreams :D

im sorry :(:p:
07-23-2009, 04:17 PM
bigwill68

Quote:

Originally Posted by Dadi_oh

Will post if I can get on image shack sometime tonight...

burn the shack and try the bucket..I guess you did'nt see my link..I gave you?

http://photobucket.com/

Quote:

Originally Posted by Dadi_oh

Oh sure. Shatter my miserable dreams :D

Either way I am happy to be over 4GHz on air with <1.3V and haven't really started playing with OC settings yet.

what's your cpu voltage sitting on? [+0.100v] or [+0.75v]?

the C1E is in 2 different ares of the bios you only have to disable it in either or not both..lol
07-23-2009, 04:30 PM
spinejam

Quote:

Originally Posted by Hoss331

im sorry :(:p:

a 1.25 vid q9550 is still nice though! :) :up:
07-23-2009, 04:42 PM
monza1412

Quote:

Originally Posted by Kashelz

Looks like bad CPU or bad combo with my board (maybe BIOS???), I cant find where to mesure FSB voltage on my P5K-E board with multimeter upside the board, 445 fsb passed Intel Burn test 50 loops easy with 445 x 8, but no luck at 450 :mad: I tryed FSB voltage all the way up to 1.4v from 1.1 in BIOS, tryed PLL voltage up to 1.7v, looks better, but also freezes during test.

:down: :mad:

Lets hope it is just a bad fsb hole with this cobo, never had problems on my 65nm quads :shrug:

I had the same combo and also 450 was the maximum stable fsb I could achieve with reasonable voltages. If you have a good lower voltage chip maybe you should consider other motherboard for it.
07-23-2009, 04:47 PM
Kashelz

But its strange, 445 FSB is easy at low voltages on all setings, next 450 is hard and 460 is hard to boot, 1.7 pll, 1.4 fsb, 1.7 nb and 1.2sb, still nothing, maybe 4 x 2Gb memory is the problem...

GLT changes also do nothing, i think its the bad CPU I got, it sensors are bad and VID also is realy bad (1.275v for 45nm), but still testing, I have 1.8v PLL still to test :D
07-23-2009, 04:56 PM
monza1412

Quote:

Originally Posted by Kashelz

But its strange, 445 FSB is easy at low voltages on all setings, next 450 is hard and 460 is hard to boot, 1.7 pll, 1.4 fsb, 1.7 nb and 1.2sb, still nothing, maybe 4 x 2Gb memory is the problem...

GLT changes also do nothing, i think its the bad CPU I got, it sensors are bad and VID also is realy bad (1.275v for 45nm), but still testing, I have 1.8v PLL still to test :D

chipset limitation my friend, thats all. I assume you have selected .67 gtl in mch. The cpu gtl adjustments barely do anything in that board. I had also tried with 2 gb and the results were the same.
07-23-2009, 05:07 PM
Dadi_oh

Quote:

Originally Posted by Dadi_oh

Oh sure. Shatter my miserable dreams :D

Either way I am happy to be over 4GHz on air with <1.3V and haven't really started playing with OC settings yet.

Will post if I can get on image shack sometime tonight...

http://img413.imageshack.us/img413/9...v475x85.th.jpg

Here is a screenshot running at 4.05GHz.
07-23-2009, 06:41 PM
vws

Quote:

Originally Posted by bigwill68

burn the shack and try the bucket..I guess you did'nt see my link..I gave you?

http://photobucket.com/

+1 from me, for the bucket's neat & clean picture hosting! :up:
07-24-2009, 03:12 AM
lordmagnum

My Q9550@3.4 GHz was running for 4h30, The max FFTs size is 8k (instead of 64), do you think my CPU is stable ?
07-24-2009, 03:32 AM
Kashelz

Quote:

Originally Posted by lordmagnum

My Q9550@3.4 GHz was running for 4h30, The max FFTs size is 8k (instead of 64), do you think my CPU is stable ?

You better add this test too: Intel burn test!

http://www.xtremesystems.org/forums/...d.php?t=197835
07-24-2009, 03:35 AM
lordmagnum

Prime95 : CPU Stability

Intel Burn Test/Linx : Cooling Effiency, and RAM.

I'm right ?
07-24-2009, 04:58 AM
Kashelz

Linx also test hard CPU stability, but Prime95 with small FFTs is good test for CPU. I test all of them, after all Prime95 Blend for 12+ hours.
07-24-2009, 07:18 AM
cincyrob

DadI_Oh

looks sweet to me. im going to put in my Mushkin meme iknow i can get 1066 out of and try and take it up some and see if i get that nice 4.0....lol
07-24-2009, 08:04 AM
lordmagnum

My Q9550 is now running at 3.4 GHz, Vcore 1.21V (with LLC), Vnb 1.26V, Vtt 1.26V, Vpll 1.52V.
Is Prime95 for 4h30 (FFTs max at 8kb) enough to check the stability ?
07-24-2009, 11:27 AM
setter

Quote:

Originally Posted by lordmagnum

My Q9550 is now running at 3.4 GHz, Vcore 1.21V (with LLC), Vnb 1.26V, Vtt 1.26V, Vpll 1.52V.
Is Prime95 for 4h30 (FTTs max at 8kb) enough to check the stability ?

Your running settings fairly similair as mine was at 3.4ghz, though i always run p95 small fft for 8 hours for cpu stability, followed by 8 hours of blend.
07-24-2009, 01:04 PM
ViViD

Hey Guys
Some Bench With My New Batch Q9550

3D 06 @ 25009 With Wow 6930 CPU Score :D

http://shahrsakhtafzar.com/img/out.php/t16671_25009.jpg

And Aqua Mark @ 262198 With Wow 900/1000 Clock 4870X2 Stock Cooler :D

http://shahrsakhtafzar.com/img/out.p...670_262198.jpg
07-24-2009, 04:13 PM
ea6gka

anyone has a L844C076 batch E0 Q9550? vid is 1.125
07-24-2009, 04:24 PM
setter

Very nice vivid, if i can eek 4ghz out of my q9550 ill be extremely happy, 4870x2 looks nice, unfortunately i couldnt afford one at the time, so i had to settle for a gtx 280, not bad for my res of 1920x1200, plays all my games at an ok rate, but if i seen a 4870x2 on auction, id have it quicker than dinner lol.
07-24-2009, 05:14 PM
Hoss331

Quote:

Originally Posted by ea6gka

anyone has a L844C076 batch E0 Q9550? vid is 1.125

Are you sure thats not the min vid?

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 01:54 PM.

XtremeSystems