i cant seem to get these to do 1300 or even 1250. i'm running 400x9 @ 1200mhz.
specs:
asus rampage formula
q6600 G0 @ 1.38v
4gb g.skill pi 9600 running 1200mhz on 2.1v
Printable View
i cant seem to get these to do 1300 or even 1250. i'm running 400x9 @ 1200mhz.
specs:
asus rampage formula
q6600 G0 @ 1.38v
4gb g.skill pi 9600 running 1200mhz on 2.1v
you sure its 2.1vQuote:
Originally Posted by method526
you cant try 2.15v
I finally got my own G.SKILL F2-9600CL5D-4GBPI kit! tried it out at with the setting in my sig, passed IBT 20tests. Awesome ram!
And they dont even run hot at 2.1v, ward at load, and normal case temp at idle...
enjoy em that is the best 2x2 ddr2 set anyone will ever seeQuote:
Originally Posted by xzulu
but you should be able to do 1260 with that voltage;)
@zsamz_
Thanks! I tried running Q9650 425x9 and ram at 1275 just like what radaja, but at vdimm 2.12v and vnb at 1.34v i got a BSOD....
http://i43.tinypic.com/2po3xjm.jpg
Is it ok to run it at 2.16v 24/7 just like what radaja did?!
Thanks!
:yepp: those chips dont even get hotQuote:
Originally Posted by xzulu
but i still put a fan past 1200;) i think its safe even @2.2
@zsamz_
Ok great! Thanks for the info. I'll use an Antec Spot Cool to cool the ram.:up:
Guys, what is F2?
Is this one ?
I think that only for testing 2.4v is ok too.
O.K. I guess I'm joining....for $140.
now B P :banana::banana: is banana? !!
http://www.xtremesystems.org/forums/...d.php?t=230494Quote:
Originally Posted by guess2098
And this goes to GSkill 9600 how???
It just censors :banana::banana: ( see... read B P ) as in B!tspower... or in 4GB.PI.Quote:
Originally Posted by 18 is # 1
Why is BALDWIN PARK , CA such a long way away???:bsod:
Tomorrow, it's Pi time!:D
will you blame me if they are duds :rofl:Quote:
Originally Posted by 18 is # 1
The price jumped up over $100 in less than a week!Quote:
Originally Posted by 18 is # 1
They'll do DDR2-1202, no farther :ROTF:Quote:
Originally Posted by zsamz_
Damnit...don't even go there! :shock2: <as he wards off the evil eye>:bs:Quote:
Originally Posted by -n7-
maybe 1204:ROTF:Quote:
Originally Posted by 18 is # 1
Damn you zsamz_!:shoot:
I can't get 1300 stable....
I did get 10K though
Much better than my 1066 Blades....
http://i383.photobucket.com/albums/o...ncan/1stPi.jpg
This are mines booted from bios at Q9650@ 4707 and testing 32M SPI run on W7x64 7600, on my UD3P they like volts on vdimm and MCH no way if not...
http://img44.imageshack.us/img44/2232/captura5.jpg
Cheers all :up:
Sergio
man that suksQuote:
Originally Posted by 18 is # 1
but i think its your board:rofl:
try harder n you dont need trfc higher than 56
dont be afraid to push 2.2v
yes its the board zsamz..awesome for quads but need volts on the vdimm and MCH as i mentioned, on my other asus they did PL7 till 1245 on lower volts...Quote:
Originally Posted by zsamz_
btw..chips are not even warm even till 2,3...runing them on more than 2,24 for 8month now i have an antec spot cooler over them
Cheers :up:
Sergio
i always said gigbut suks nothin new to me lolQuote:
Originally Posted by andressergio
i'm gonna teaze mr.18 a bit
2.1-2.2v cant remember
my board suked bad