Printable View
old 3.0C (looks like it has got some extra speed during the last 2months - used to max at 4206):
http://www.akiba-pc.com/e107_images/...pi1m_32sec.gif
In 1:1 mode it reaches 34s limit at only 3821MHz ;)
http://www.akiba-pc.com/e107_images/...pi1m_34sec.gif
macci: what is the stepping on your 2.4A?
When i ran 12.5x200 I did 44sec with my 2500+
When i run 11x225 it will do 40sec
4sec of just by running 225MHz run instead.. :)
247,6*10 = 38 sec :D
I'll update with picture later...
Update, picture:
http://www.try-this.dk/38sek.jpg
bias_hjorth....Quote:
Originally posted by bias_hjorth
nice one tic´tac..
somebody ´should me this thread sticky again.. :)
its Mr Dani score not mine...(i dont have computer :( ) he is my beta tester
hey he get 33sec also... same as ur A64...hehehe :D
n dry ice cooling....
Super PI 1M =33sec
http://downloads.modlabs.net/bios/pic/dani3.gif
awesome.. :slobber:
Then I´ll guess I have to improve. :)
.
My best result:
http://66.97.34.139/spi34.JPG
Its old, but its a 35 s run.
2.6C L321 nV Mii cooled
http://w1.825.telia.com/~u82507271/superpi35sec.JPG
35s are doable with only 3850MHz! ;)
Impressive!! :toast:Quote:
Originally posted by macci
old 3.0C (looks like it has got some extra speed during the last 2months - used to max at 4206):
http://www.akiba-pc.com/e107_images/...pi1m_32sec.gif
In 1:1 mode it reaches 34s limit at only 3821MHz ;)
http://www.akiba-pc.com/e107_images/...pi1m_34sec.gif
mmmh, I only get 35s with 3890MHz! with 259MHz Ramspeed. You only have 3821MHz Core and 255MHz Ram. That is 70MHz less CPU and 4MHz less Ram. I have the P4C800-E.
http://mitglied.lycos.de/coolinglimi...uperPI_324.png
Is there a secret in benching SuperPI? Please tell us! :D
:) With new setup
Here's my Cascade-cooled P4 3.4EE 27 second SPi run on IC7 339FSB:
http://bravo.ausgamers.com/lardarse/lard/27sec.JPG
I think its getting close to 26s as it hits 27S just a bit below 4.7Ghz.
Very nice Lard!
Is that 5/4 with some nice bh-5's ?
No. 1:1 ;)Quote:
Originally posted by LiMPAN
Very nice Lard!
Is that 5/4 with some nice bh-5's ?
BH-4. Has been out since 1st April :ROTF:
I think he's on 5:4... :)
Quote:
Originally posted by SAE
No. 1:1 ;)
BH-4. Has been out since 1st April :ROTF:
I think he's on 5:4... :)
well... he could be on 3:2:stick:
Hey. I did not want to make you angry. :(Quote:
Originally posted by LiMPAN
well... he could be on 3:2:stick:
It's just been fun :)
But I think this performance follows a strong ram clock... So that's why I finally agreed with you :D
OMG :slobber:
memesama get this time with his 3.2E ES in air
30s at 4161MHz
http://membres.lycos.fr/cpulloverclo...18093539.1.jpg
I'm on 3:2. There's a stinky 280 FSB wall with 5:4 on my board.
:eek: No. Too bad :(Quote:
Originally posted by LardArse
I'm on 3:2. There's a stinky 280 FSB wall with 5:4 on my board.
There's no fix?
VDD/Vdimm/VTT was done but not VAGP. Anyhows I'd still not be able to run 339 FSB with 5:4 so it sort of balances out at high FSB 3:2
1:1 mode is clock to clock faster than 5:4 mode. Also use Win2003 server OS for SPi 1M :)Quote:
mmmh, I only get 35s with 3890MHz! with 259MHz Ramspeed. You only have 3821MHz Core and 255MHz Ram. That is 70MHz less CPU and 4MHz less Ram. I have the P4C800-E.
Ok then I will try it on Win2003! THX! :)Quote:
Originally posted by macci
1:1 mode is clock to clock faster than 5:4 mode. Also use Win2003 server OS for SPi 1M :)
my lowest frequency for 36s, I think with a better fsb It would give 2270MHz
http://membres.lycos.fr/cpulloverclock79/36s..JPG
Not really fast and far away of your times, but my pers. best try with my system...
http://mitglied.lycos.de/d3r8is/pi.JPG
I think a bit more MHz and i get another second, cause till 235xMHz nothing change.
Changing my Samsung CC4 for some Infineon 6A for better Timings dont gave me the expected effect.
btw, sorry for my english ;)