Just installed...boxed chip and OCZ 5400EB all maxed in bios with stock hsf/air
http://img115.imageshack.us/img115/6...shot0248yw.jpg
Board got to go to operating table asap before more cooling added....for 3 seconds quicker:)
Printable View
Just installed...boxed chip and OCZ 5400EB all maxed in bios with stock hsf/air
http://img115.imageshack.us/img115/6...shot0248yw.jpg
Board got to go to operating table asap before more cooling added....for 3 seconds quicker:)
Dumo, is there any chance you've try setting 10x multi and FIRE it up @ FSB, Im quite qurious if its the same as the former samples, or its actually a bit better this time, especially since "I've order same place at yo" :toast:
Its retail boxed T2600 (I think multi locked) and NE first day retail board..
http://img20.imageshack.us/img20/656...shot0290bl.jpg
http://img133.imageshack.us/img133/6...shot0095dh.jpg
Seems like Crystal cpuid can be use to change multi...
http://img77.imageshack.us/img77/666...shot0250wj.jpg
http://img77.imageshack.us/img77/502...shot0271ne.jpg
under air!
still improving!
http://iamxtreme.com/cpu/t2600/aopen_yonah_009.JPG
http://iamxtreme.com/cpu/t2600/aopen_yonah_010.JPG
or no :(Quote:
Originally Posted by kingkong
hi KatsumiQuote:
Originally Posted by kyosen
congrats (great results)
and ...yes...same finding here in Germany - though there are some rare fine results
with 4 stepping cpus , stepping 8 seems to be the way to higher fsb.
m
How to know it's it's a step 4, 8 or else ?
Written on what ?
anyone tested this stepping ? (T2400ES)
http://wowgame.free.fr/Yonah%20T2400/T2400ES.jpg
i know it's a T2600ES thread, but no one exist for other stepping :p:
can anyone from our friends in Asia
comment the rumours in circulation about a new revision A1 of
the AOpen board
A tad higher...
http://img488.imageshack.us/img488/2...shot0421za.jpg
I suppose the rev.A1 should be written on the pcb of the board...right??
My board is excaxtly the same at the specs....
http://i7.photobucket.com/albums/y25...AOPENspecs.jpg
but rev.A00..:(
http://i7.photobucket.com/albums/y25...S/AOPENrev.jpg
so VCCA mod wasn't totally useless....
good :) atleast I don't look stupid for suggesting it would raise the wall :D
Quote:
Originally Posted by mine
The pics are from me...............:mad:
What revision do you have??Quote:
Originally Posted by AndreYang
Calm down Andre...no need to get angree cause of this...:D
i got up to 266FSB using a T2300
went up to 243 using a T2600 ES
when i used the remote control to go higher, it went to 200mhz and then locked up. I havent had time to test further.
ill test more this wednesday when i have more free time
LOL :banana:Quote:
Originally Posted by AndreYang
and what is the different between A0 and A1?Quote:
Originally Posted by AndreYang
Quote:
Originally Posted by Chri$ch
Some people say A0 is ES rev. and oc to high FSB.
A0= Bios 1.00
A1=1.02
and andy ??Quote:
Originally Posted by AndreYang
do you know is there a new 01 or is this just the normal aopen box
saw it in a taiwanese forum :-)
oh the world is getting smaller and smaller
Quote:
Originally Posted by GoriLLakoS
All A1..........
By KUBOKUBO under LN2
CPU Voltage Setting： 1.5000V
DRAM Voltage Setting： 2.15V
NB Voltage Setting： 1.675V
CPU Clock@boot： 235
modPI 1.5 XS 1M: 16.969s @3562.4MHz （FSB274.0 x 13)
http://kubokubo.jp/cpu/coreduo_t2600...562_274x13.gif
modPI 1.5 XS 8M: 3m20.047s @3511.5MHz （FSB270.1 x 13)
http://kubokubo.jp/cpu/coreduo_t2600...511_270x13.gif
lol you guys are really benching hard aren't you..
so many (good) results in such a short period lol.. :D
can anyone do some cleaning or put all of the screenshots in the beginning is getting pretty hard to follow this thread.
regards and great timings
By CAL930 under DICE
Too bad Dry ice was run out @FSB269MHz...
modPI 1.5 XS 1M: 17.422s @3472.7MHz (FSB267.1MHz x 13)
http://cal930.sakura.ne.jp/cgi-bin/c...b267_17422.png
@Waus-mod
Please update the records in the front page.
Thanks.
All first day batch from NE are A1...
A few stuff to test:)
http://img93.imageshack.us/img93/339...shot0910br.jpg
oh man look at that :slobber:
I did some testing with my 5400UL...great stuff, to bad i cant run it harder coz the fsb problem is holding me.
http://img.photobucket.com/albums/v336/wappie/2.jpg
3.5vdimm :confused:
By duck under LN2
(Set up)
CPU: T2600 QKHK 7540B009
M/B: AOpen i975Xa-YDG BIOS R1.03
Memory: CORSAIR PC2-5400UL 512MBx2
VGA: Viper V330(RIVA 128)PCI
HDD: IBM-DTLA-307030
PSU: OCZ PowerStream 520W
Vcore 1.60v, Vcca 2.50（kyosen-Mod）, Vddr 2.48v, Vio 3.71v
OS Windows Server 2003
MEM 667 CL4-3-2-4 3:5
M/B Bed V-TEC ARC Bed
LN2＆KuriPro2 －100℃
modPI 1.5 XS 1M: 16.735s @3616.2MHz (FSB278.2MHz x 13)
http://premium1.uploadit.org/fredyam...z--by-duck.gif
Forgive me if it's been mentioned, but where do we get the clockgen that people seem to be using?
I think it one has not been released yet :(Quote:
Originally Posted by wwwww
maybe one of the guys could give it to us.
hmm Do i see 2 Red sticks of Adata Veista :DQuote:
Originally Posted by Dumo
Looks like the monster is back Dumo :cool:
wow... thats some coooool stuff you got there dumo :D
@Waus-mod
Please update kyosen's record http://www.xtremesystems.org/forums/...postcount=1524
Thanks.
Just informed him @ MSN, but Fred, use PM system, its quite usefull for such matters :)Quote:
Originally Posted by PRTeamJapan
Hey G H Z please clear your inbox.Quote:
Originally Posted by G H Z
What are your patriot memories ?Quote:
Originally Posted by Dumo
What freq & timings do you expect for them ?
Dumo, Superb collection :). Amazing numbers from friends in Japan, Congrats!
Done Fred :)
3410 MHz, 1.5V, 284 MHz FSB, 3:5 @ 473 MHz 4-4-4-12, Vapochill LS
http://home.arcor.de/jodee2/SuperpiY...2MHzpower1.JPG
why not use 13x multi :confused:
amazing FSB ;)
the max stable FSB is at 295 MHz @ 1,625 without mods with the 11x multi.Quote:
Originally Posted by dinos22
Today's best:)
M/B: AOpen i975Xa-YDG改（#1）
CPU: T2600ES
CPU Cooling: KURIPRO4＆DRYICE
Memory: CORSAIR PC2-5400C4 V5.2 512MBx2
VGA: RIVA TNT2 PCI16MB
HDD: S-ATA HDS728080PLA380
Power Supply: Zippy-500GE
Vcore: 1.63V, Vdimm: 2.46V
OS: Windows XPsp1
MEM: 4-3-2-4 3:5
Vio:3.74V
modPI 1.5 XS 1M: 16.312s @3708.7MHz (285.3 x 13)
http://cal930.sakura.ne.jp/cgi-bin/c...6312_T2600.png
Holy moly! Congrats CAL930!
That's insane - SuperPI in 16.312 seconds! :eek:
damn!
wel guy's, still 0.312 seconds short :P
great job!
:woot: Gettin up there now :)Quote:
Originally Posted by CAL930
Fredyama....could you please ask cal930 to run some 3d when he gets a
break from pushing the pi scores to the heavens? I am sure alot of peeps incuding myself would love to see some 3dmark06,05, and 03 at those speeds(over 3600mhz) with default clocked x1900's in xfire.
Japan Team good Job:woot:
Yea im with you on that. WE know you will brake 16's soon:woot:. But plz give us some 3d benchmarks. Run AM3 too if you canQuote:
Originally Posted by k|ngp|n
Cal930. i updated youre score..
Dumo... cooling changed
Yes, have already passed your request to Cal930..Quote:
Originally Posted by k|ngp|n
I bet him & kyosen will try them shortly after the PI.
BTW, would you please register your awesome AMD WR modPI 1M record to Bunny's Workshop ?
He has just created modPI 1M ranking.
By using English registration form, it will also register in his conventional PI ranking.
Thanks.
I have 2x 7900GTX and a T2500 2morro so i can test 3dmark :)
CAL930, step 8 or 4 ? :)
Awesome result :toast:
SLI doesn't work on that Aopen.
or is there a workaround already ?
Amazing score cal, nice FSB!!! :toast:
On DI only, what will LN2 bring???
I would also like to request some CF tests if you have the time please.
By KUBOKUBO under LN2
His initial modPI 1.5 XS 32M result more awesome one to come;)
15m57.375s@3537.0MHz (FSB272.1MHz x 13)
http://kubokubo.jp/cpu/coreduo_t2600...537_272x13.gif
I think it's safe to say that Team Japan has no equal :toast:
Time to go back to work cal ;) We're you on the same memory divider as KuBO?
great scoores
what ram do you use japan?
Hopefully it´s not a fake:
AOpen @ oc-wear in stock - :toast:
So, I´ll be back, soon...;)
hehehe, saw that as well ;) but as far as I know, kiwi, who ordered 2 boards from them (one for me), did not receive the shipping confirmation on the 18th...Quote:
Originally Posted by stummerwinter
The only way you can get SLi done is to use modded 71.83 version of nv driver, 71.XX doesnt recongize and support 7900 series.Quote:
Originally Posted by Waus-mod
i hope you have a way around it:p:
well.. its not for sli.. just some 3d mark testing :) and 2x just for card picking.
good luck
single card WR coming?
hey, which superpi ver. u guys using?
T2600 ES - thanx FCG!
@ 240x13 on air
1st run @ 1M
19.73s
for me, looks like 246fsb is the cap in windows but its not stable
13x246 or all coeff x 246 ?Quote:
Originally Posted by NapalmV5
It's completely different :)
oh.. ive only tried 12 and 13 but same resultQuote:
Originally Posted by jmax_oc
btw, vcore @ 1.5v
1M: 16.313s...hmm, 0.001s behind for WR;)
<img src="http://222.151.144.54/c-board/file/16.313s_T2600ES_3661.9.png">
8M: 3m06.093s...yeah enough for WR:)
<img src="http://222.151.144.54/c-board/file/3m06.093s_T2600ES_3648.0.png">
To: NiCKE^, please update WR article, though this record will be obsolete soon:D
And now I've done Tcore mod...for cold bug of i975Xa-YDG at booting.
<img src="http://222.151.144.54/c-board/file/i975Xa-YDG_Tcore-mod.jpg">
For more details and screenshots, refer my BBS below, please:
http://www.oohashi.jp/c-board/c-boar...ne;no=4351;id=
Sorry in Japanese language.
Thats the mod I'm looking for:) Thanks for info kyosen:toast:
I've been struggling to post @<-10C with 50/50 results.
Congrats on the score. Did you try that amazing cpu power on 3D?
I knew you would like that mod:)Quote:
Originally Posted by Dumo
That's one awesome find Kyosen! :toast: Sick scores as well!
How are you getting the fsb so high while everyone else walls? Is it the cooling? Plan on trying ln2 soon?
Kyosen, is there a similar mod to enable Presler booting for those with cold boot problem?
hate all you yonah guys (jk) , u make my 950 presler look bad :(
anyway, those chips look great! and nice job kyosen.
lol 0.001:D . That FSB sure helps on this score. Nice Vmod indeed.
Run AM3 on that speed , damn benchmark is fast only 1 min.
Is this a fixed resistance? Or will a VR pot be necessary for booting @ different temperatures? Lastly, your pic states that the trace is connected to pinA24 in the socket....do you mean to connect the points with a jumper wire? Or is it just a description of where the circuit is mapped? Thanks....Quote:
Originally Posted by kyosen
Very nice kyosen this mod will help alot of people:)
no more super pi, your making my pc jealous :(
3D time ladies...
These scores will make the owners of AMD turn to the dark side...
hopefully someone can bring out a decent motherboardQuote:
Originally Posted by Philosophy
Quote:
Originally Posted by s7e9h3n
Not that I really know - but I assume the trace needs to be cut in order to bypass and instead use the pot to set resitance
Kyosen - thanks for this find! Thanks so much for sharing!
If I understand that mod correctly the connection to the CPU pin that monitors the diode is severed, then the pot is used to create a false reading in BIOS. Stephen I think all you need is in the pic, no other wire is needed as kyosen indicates it's connected internally.
Thank you kyosen :toast:
Really nice time on both 1M & 8M!
OK, I think I understand that part BUT I'm wondering if a fixed resistor can be used in place of the pot. I used my last 3 50k pots on an x1900xtx yesterday, but I have a few fixed resistors I can wire in series or other VR's which can be set @ 17k. I just need to know if the value for the resistance may/may not have be changed for whatever reason......Quote:
Originally Posted by G H Z
If you wanted to test you could measure the resistance while running on air across R570, might be how kyosen did it ;)
Mike I don't think the cooling type effects this at all. I think the mod creates a false BIOS reading that is always the same regrdless of cooling, we need to hear more from kyosen.
My fear is having never cut a trace how to do it correctly :confused:
Odd, Waus didnt have any problems with coldboot...?
Im planning running -40 phasechange (evap temp), do I need to do anything in order to do that?? - And LN2 for benchies ofcause, but booting and cooling afterwards wont be a problem then?
Actually, looking at the pic again,if Kyosen has set the value between legs 3 and 2 to 17K, the resistance from r570 -> pin is 33k. I'm curious as well why the resistor can't simply be replaced by another with the value that is necessary.Quote:
Originally Posted by mikeguava
@Ghz: Just cut the trace with a sharp knife and you'll be OK. Make sure that the cut is deep enough to get through the top layer as well as the trace.
@ M.Beier: Waus's board was an ES board directly from Aopen. Maybe that's the reason why? I know that Dumo has had problems even with a stock Vapo @ -30C......
I am too tired :clap: - missed the completly that there were three wires in play and an explanation above....rofl. Now how I missed it makes no sense...
Time to put my dumb ass to sleep
Sorry, I don't really understand that mod. Can someone explain? 3 wires? Does one wire go to pin #1 (looking @ picture from left side) of w83627EHG chip? What does "cut a trace" mean?
Some english terms I don't understand :slap:
even on ln2 i gained only 4mhz.. so :(Quote:
Originally Posted by afireinside
and I still haven't received the boards, damnit....
arrived :)
update your post Gamer :D
kyosen has modified the value in entrance of chip winbond the 83627, with this modification and possible to simulate a temperature to our pleasure increasing the resistance of the trimmer. the pin of reference it is the 103.Quote:
Originally Posted by s7e9h3n
great job kyosen ;)
http://img88.imageshack.us/img88/276...gine3dd.th.jpg
ok, first problem here...
no boot.
I can see the PCI card biosversion, only it reboots constantly.
tried with one ram, two, different,....
could it be that I'm using a 20 pinn PSU ?
Antec True control 550 watt.
@kyosen Clock-Gen 1.0.4.4?? Have you a Download Link?
Good news from OC-Wear, got this mail today:Quote:
Originally Posted by mrlobber
Translation: Boards arrived and ready for shipping today or tomorrow!Quote:
Originally Posted by OC-Wear
it looks like the problem is the PCI card, with the 7800GTX, not a single hickup.Quote:
Originally Posted by Gamer
fixed :)
would be a bit of a relief.....get clocking now :D
yeah, I wish :(
can't install windows, when reboot I get a hal.dll missing...
maxtor 6l200mo.
can't get it, this should be plug and play :)
going to buy a new hdd, not maxtor.
I tested the clockgen with franck. but it still isnt final so you have to wait a bit longer. :)Quote:
Originally Posted by Staucher
I had the same problem with mine maxtor (sata), now i have a seagate (sata) and it run!Quote:
Originally Posted by Gamer
first results :
stock PIV cpu cooler (alu).
this is great and silent.