more pics less chatter :)
Printable View
more pics less chatter :)
Its a "toyota" coolant but I suspect that its a Zerex derivitiveQuote:
Originally Posted by SaFrOuT
Came with the Lian Li Case you can also buy them sperately, planning better plumbing with elbows with my Conroe system later this month.Quote:
Originally Posted by berknip
ffs, more pics less chatter people! :)
Delrin is also known as Acetal, is a plastic Polymer.Quote:
Originally Posted by L'enFer
I consider thar plexiglass crash very commonly, but delrin never crash because is more flexible that plexy.
Greetings.
tiborrr, beauty coloured system. is a cpu w/b selfmade? if not then what is it?
http://img132.imageshack.us/img132/3...02808hi.th.jpg
http://img132.imageshack.us/img132/6...02812hc.th.jpg
http://img97.imageshack.us/img97/756...02839hi.th.jpg
http://img300.imageshack.us/img300/3...02870nj.th.jpg
http://img361.imageshack.us/img361/5...02887jq.th.jpg
http://img253.imageshack.us/img253/3...02908cq.th.jpg
plz make the pictures smaller! :)
@L'enFer: The waterblock is Eddy's simpliest EK-S model (here's an URL: http://ekwaterblocks.com/ - Slovenia's best WC stuff manufacturer). I had Morphling's MK4 waterblock (whitewater design) before this one but had to switch to a less restrictive spiral-type block.
Just about done with my other new w/c case, gotta ghost my old raptor boot drive to my new one.
http://img110.imageshack.us/img110/7...uly18vm.th.jpg
http://img156.imageshack.us/img156/4...uly28nj.th.jpg
PA 120.3 w/6 yateloon push-pull
DangerD D5
Mp-05 waterblock
2 maze 4 gpu blocks
3ghz 148 opty
2 gig gskill
2 x 7900gtx 512
PCP&C 1kw PSU
SoundB X-Fi
150gig dell raptor
250gig WD
160 Maxtor
Here is mine. I've only had it for a little over a week, so I am still working some stuff out. Hmm...looks like I need a little bit of cable management. Oh well, she works.
http://img187.imageshack.us/img187/9760/dsc006773ll.jpg
http://img226.imageshack.us/img226/3874/dsc006815vy.jpg
http://img401.imageshack.us/img401/5...83large9vc.jpg
is that a storm or an apogee? how's the perfomance?Quote:
Originally Posted by mcflurry4321
you gotta give up the tempsQuote:
Originally Posted by tiborrr
It's a Storm :D :DQuote:
Originally Posted by rhkenji
And there isn't much that beats it, other than the storm g5 of course. I would definitely go with it vs. the apogee. I'm very happy with it.
lian li :clap: nice job... you have some more pix?Quote:
Originally Posted by kinggost
Cl4w more pics please one of your radiators :p:
http://img477.imageshack.us/img477/7...26small1gw.jpg
its not finished ;)
Nice setup man
Nice lian li :toast:
It's more a nice looking setup than a good setup... ;)
Quote:
Originally Posted by JoeBar
WTF ......
realy nice cooling... there is space for 6 more fans... :D do it....
http://img358.imageshack.us/img358/7451/dsc000450sf.jpg
fx60@3.0ghz-1.55v
idle temp 33c
load temp 44c
not bad for £69 wc setup
much better than my old freezer 64, that used to be 56c@1.55v
Here it is finally, was horrible to bleed the thing as the res is too small. At least I didn't kill my hardware like I had a feeling that I would. Semi successful first WC. Thanks to ReD.SkY for the help!
Horrible photos I know, Bad lighting + terrible photographer. Sorry about the feet in the one pic also :\. The 80mm fan will be replaced and UV lighting will be added so the dye is actually useful.
AquaXtreme MP-05 SP LE, MCW-60, MCP-655, MCR-220, Alphacool Mini Res, 7/16 Musk, Distilled + Dye-Lite UV blue, Aquacomputer grill, 2x Yate Loons.
http://img215.imageshack.us/img215/1...02519od.th.jpghttp://img215.imageshack.us/img215/1...02501bi.th.jpg
http://img133.imageshack.us/img133/6...02482hn.th.jpghttp://img301.imageshack.us/img301/9...02459pq.th.jpg
http://img301.imageshack.us/img301/3236/P1010257.th.jpghttp://img301.imageshack.us/img301/6192/P1010256.th.jpg
http://img301.imageshack.us/img301/4218/P1010255.th.jpghttp://img301.imageshack.us/img301/5381/P1010252.th.jpg
http://img234.imageshack.us/img234/7...02604mg.th.jpg
Alu vga block, questionable cpu block, 90' connectors, small tubing, condeser style radiator. Thnx but i'll pass... ;)Quote:
Originally Posted by SaFrOuT
@Eastcoasthandle: CPU fully loaded /w Rosetta@Home ~ 37°C (Opty144@2.84GHz, 1.7V - reapplied IHS mod), GPU X850XT loaded 45°C (1.65V).
Quote:
Originally Posted by JoeBar
SO SORRYYYYYYYYYYYYYYYY
i meant QFT not anything
Sorry agaaaaaaaaaaaaaaain
its a set up anybody who loves w/cing would wantQuote:
Originally Posted by JoeBar
one question tho, i noticed your missing the bottom of your case cl4w ... just wondering where it is
:confused:Quote:
Originally Posted by trance565
http://img133.imageshack.us/img133/6...7medium1nt.jpg
DAMN YOU GUYS GOT SOME AWESOME SETUPS. :banana: :banana: :banana:
I just got into water cooling. Here's my setup.
AMD 3000+ AM2 @ 2.8GHZ 1.5v w/ Swiftech Dual Heater Core
ASUS M2N SLI Deluxe HTT 1.86GHZ @ 1.4v
2GB Corsair XMS2 DDR2 6400 @ 800MHZ (/7) 5.5.5.12 2T
2, 36.6GB WD Raptors 10k rpm, RAID 0
XFX 7900GT w/ Zalman VF700 ALCU volt modded 1.45, 650 / 1650mhz
Creative Audigy 4
update.... lol^^
http://img380.imageshack.us/img380/9...1medium6ee.jpg
http://img105.imageshack.us/img105/5...2medium4ct.jpg
http://img60.imageshack.us/img60/842...0medium8hx.jpg
it sucked? only a little bit ;)
im guessing its toasted...
that does not look well for the card/chip:smoke: :doh: :wasntme: :brick: :dammit: :upset: :nono: :(
Very slick and clean sladesurfer. Can you post some more pics of the system to see the whole case.
What case are you using?
haha his cabling is so good - he made his video card disappear!! Now thats some wiring magic there ;)
Just reworked my loop, added a second D5 and Eddy EK chipset and VGA block. The Repack reservoir is also new, and it sucks, seems to be too small for even 1 D5 as air bubbles kept being sucked straight through it back into the loop even when filled to well above the level of the exit barb. As a result I changed that to act as a reservoir to a T-line.
http://img80.imageshack.us/img80/838...03645bg.th.jpg
http://img147.imageshack.us/img147/8...03688yk.th.jpg
http://img147.imageshack.us/img147/3...03695dc.th.jpg
http://img147.imageshack.us/img147/1...03748zt.th.jpg
http://img147.imageshack.us/img147/6...03760ok.th.jpg
very nice there pineapple!
sladesurfer post outside the box picsQuote:
Originally Posted by dnottis
which case is that?
and dont forget the video card ;)
Very nice Atomicpineapple! :up:
@ Safrout. No harm feelings m8! :toast:
@ JoeBar glad to know that :)
@ Atomicpineapple very nice setup indeed, are there any diff in GPu's load and idle temp between the two cards since u r using diff blocks
Couldn't stand the stock sidepanel so I ordered up the windowed panel. Had issues with tubes rubbing against the window and getting tweaked hence the black velcro strap things. The CPU out to GPU in tube is still touching the window, too long. It doesn't look like any of the fittings are stressed but because I like to worry, I am stressed. Good thing new tubing is cheap. Anyway, on to the pics:
http://img.photobucket.com/albums/v4...etstacker3.jpg
http://img.photobucket.com/albums/v4...etstacker4.jpg
http://img.photobucket.com/albums/v4...etstacker5.jpg
http://img.photobucket.com/albums/v4...etstacker6.jpg
nice idea
My setup:
Conroe E6600 steppign 4 (soon a stepping 5)
Asus P5W DH, Corsair 2x1024 6400C4
PoV 7950GX2, All i a Tt Tai-Chi
http://www.conman.se/data6.JPG
http://www.conman.se/PICT1675.JPG
http://www.conman.se/data5.JPG
Cant say about card temps as 1s a 16 pipe X1900 Crossfire Master and the others a 12 pipe X1900GT so the heat output will be different, perhaps when I'm bored ill swap the blocks around and see if theres any difference.
yes, i think so, too :).Quote:
Originally Posted by Latoron
CoNMaN most people here would recommend getting rid of 90degree fittings
otherwise it is a nice setup...
Hello, I'm Zenjirou
I've been using Huge Radiator for long time, except for last couple months its been in service/clearning and being equiped with a shroud and 20+ 120mm Yate Yoons :) This setup was assembled couple months ago
(sory if Pics are too big and redundant )
http://surfinchemical.com/Zenjirou/tatsurev3/rev3_1.jpghttp://surfinchemical.com/Zenjirou/tatsurev3/rev3_2.jpg
http://surfinchemical.com/Zenjirou/tatsurev3/rev3_3.jpghttp://surfinchemical.com/Zenjirou/tatsurev3/rev3_4.jpg
http://surfinchemical.com/Zenjirou/tatsurev3/rev3_5.jpg
I felt like posting it here, because Koyo will be ready soon and thus this little setup will be gone :p. I miss clean/neat watercooling :D, but that is price one must play for Xtreme H20 Cooling :)
Holy bejeebers Zen! A full on racing rad for watercooling. That is spiffy, yo.
Also, your old setup looks to be quite the clean one. I'm not a HUGE fan of T's myself (prefer res'es for ease of filling, ect), but it looks quite nice. Also, are those TMD fans you are using?
-Ghent
KRUEML may i know about ur setup..
radiator and flow.
Krueml:
Just curious, are you running any sort of fluid-additives in that loop? Mixing metals (aluminum in the rad, copper in the blocks) is asking for galvanic corrosion. I can't tell due to the coloration in your pictures.
Also, what CM case are you running?
-Ghent
Mine is still a work in progress, I need to do a LOT more wire management. :nono: :slapass:
http://img228.imageshack.us/img228/9...7medium3ch.jpg
http://img100.imageshack.us/img100/7...2medium9mg.jpg
http://img92.imageshack.us/img92/344...4medium3wb.jpg
http://img98.imageshack.us/img98/287...0medium6zp.jpg
http://img98.imageshack.us/img98/366...4medium0mk.jpg
http://img228.imageshack.us/img228/9...7medium3ch.jpg
http://img137.imageshack.us/img137/5...1medium3ib.jpg
http://img378.imageshack.us/img378/3...3medium6kx.jpg
http://img161.imageshack.us/img161/2...4medium7gt.jpg
http://img124.imageshack.us/img124/7...5medium2yx.jpg
http://img367.imageshack.us/img367/6...6medium4ow.jpg
http://img367.imageshack.us/img367/8...7medium8li.jpg
http://img291.imageshack.us/img291/9...8medium7xp.jpg
http://img367.imageshack.us/img367/4...9medium0rm.jpg
http://img291.imageshack.us/img291/8...0medium8br.jpg
a t-balancer would be nice for that...
It is high on my gotta have list. :DQuote:
Originally Posted by septim
And here's mine...just gotta clean up the outside a bit, and tidy up some wires then we'll really be in business!
http://img218.imageshack.us/img218/5...2544ou2.th.jpg
http://img132.imageshack.us/img132/4...2545ez3.th.jpg
http://img145.imageshack.us/img145/7...2546qq4.th.jpg
http://img145.imageshack.us/img145/4...2547pg6.th.jpg
You've got quite the kink there.
Holy crap. And with a storm in the loop nonetheless!Quote:
Originally Posted by norse
Side panel number 1
http://img410.imageshack.us/img410/8...onview14dh.jpg
http://img410.imageshack.us/img410/4905/dragon35fj.jpg
http://img346.imageshack.us/img346/8...onview29rf.jpg
The next one will be here on Monday or Tuesday, even cooler looking than this one.
More cleaned up pics
http://img145.imageshack.us/img145/4678/dsc02584oj4.jpg
http://img145.imageshack.us/img145/9633/dsc02595es3.jpg
http://img145.imageshack.us/img145/993/dsc02586ps7.jpg
http://img145.imageshack.us/img145/4019/dsc02590kn3.jpg
Let me know watcha think. Oh and I also added 3 120mm deltas on top (151cfm) and a suitable fan controller of course :D
My second 7800gtx will arrive Monday too
i thought i saw a kink in there...
Quote:
Originally Posted by Reinvented
I am sure this has a very negative effect on ur loop's performance
http://img89.imageshack.us/img89/340/1252545ez3cq7.jpg
Naw, not at all. Those were taken right when i finished my loop on Friday night. Afterwards, i did get a hose clamp on there. Last night, i did try it with both on and off, and it didn't make one bit of difference. See, you guys forget, Masterkleer is probably better at bending than anything we've used previously. It can take a pretty large bend before it really really kinks up. But, it's fine...and it doesn't hurt the performance one bit.Quote:
Originally Posted by SaFrOuT
Is that WCed PSU?Quote:
Originally Posted by JME F1delity
Not to nitpick, but true that it might take a large turn before kinking. However, yours is definitely kinking :D
@kruemul
awful res position
at least fil it ;)
water level in cpu block is higher. some time soon many bubbles will be there ;)
No haha. There is a flow meter sitting on top the psu. Thats a Pc Power and cooling 510 watt :cool:Quote:
Originally Posted by Kain XS
nice ribbons on the fans jme! lol, but great setup overall ;)
you KNOW you like dem ribbonz boy.Quote:
Originally Posted by XFxGeforced
KIAN XS
Naw, not at all.
dude you need to FIX the kink
it is not good
There is no way that kink isn't affecting your performance. Even if the tubing isn't technically kinking, you still have a sharp turn.
I like the UV Blue panels...nice touch. I can relate to what you are saying with respect to wire management. While everything else is pretty easy to install keeping it neat is another issue. lolQuote:
Originally Posted by SiGfever
Glad to see you are up and running. Please keep us posted with your progress. :thumbsup:
Quote:
Originally Posted by JME F1delity
Looks like you have a kink as well on the snake like tube that goes form the middle to the top.
nah thats just the angle and how tygon tubing bendsQuote:
Originally Posted by Trice
The thing is, that is still impeding his flow something ugly. You might want to try putting a few zip-ties onto that run, or, barring that, pick up some coolsleeves and use them.
Or, it might be time for some open loop surgery.
Just my $0.02.
-Ghent
Okay, so for all you morons who just can't learn to read, read this post...
http://www.xtremesystems.org/forums/...postcount=1693
So, in conclusion, READ BEFORE YOU POST.
I read that.....Quote:
Originally Posted by Reinvented
That's why I posted back...because I still thought that that HAD to restrict flow. No matter what you say. Unless you have a flow meter hooked up to it and can prove that that doesn't hurt your flow.
I agree...while a kink may not directly affect your performance now, it will have a detrimental impact on the flow. Now, if you are using a pump that can power over such an impingement, Great! However, in the interest of making the least amount of work for the system in question, kinks, bends, ect should be minimized, at least from MY experience.
Your Milage May Vary, subject to change without notice, and tax tag and title not included.
-Ghent
Final side panel, system complete :D
http://img289.imageshack.us/img289/7594/dsc02598wi5.jpg
http://img289.imageshack.us/img289/4924/dsc02600ck4.jpg
http://img289.imageshack.us/img289/8137/dsc02601ys3.jpg
http://img159.imageshack.us/img159/743/dsc02613yt4.jpg
http://img249.imageshack.us/img249/4...onview1us9.jpg
Nice! :)
very nice install really like the initials and the dragon gerat shade of blue
Quote:
Originally Posted by Reinvented
go outside and bend your waterhose vs not bending it and see which one has more flow.....this is not rocket science if there is a kink it IS slowing down flow period! not trying to bash you or call you an idiot but this is very basic stuff..:woot: :toast:
who do you think you are? some kind of hose technician? :p:Quote:
Originally Posted by Grinch
JME did you attach your fill port to your side panel? looks like it...
no haha, its just kind of sitting up there on some cablesQuote:
Originally Posted by septim
:toast:Quote:
Originally Posted by Grinch
See, Grinch...please read my post earlier. I HAVE ALREADY PUT A :banana::banana::banana::banana:ING HOST CLAMP ON IT! I HAD ONE ON THERE AFTER THE PICTURES! So, guys, before you post, learn to :banana::banana::banana::banana:ing read.Quote:
Originally Posted by Grinch
And yes, it is slowing down flow, but not so much that it's absolutely killing my performance. Same thing happened with my other one, with HE120.2 with shroud, where the barbs were coming right up against my DVD burners.
So wait... have you tried a hose clamp on that ???!
Lmao
Quote:
Originally Posted by Reinvented
maybe you have misunderstood my post...I was simply stating that a kink slows flow!
I cant read but those pictures of that kink needs a fixing.
you dont need to be educated on rocket science or be a hose :banana::banana::banana::banana: to tell that a common sense stuff like that restricts flow.Quote:
Originally Posted by CRXican
if you dont want comments, dont post. :slapass:
Staucher, does it really have to have 90deg elbow before the pump?
Staucher, what reservoir do u use?
Looks like a Cape Coolplex 10 ;)
@LénFer its a Cape Coolplex 10!
@septim would know none other one Solution
oh very nice gettin eddy barbs for the beautiful storm!
what's the point of having a Stacker if you're going to mount the rad outside?
MORE ROOM!, umm yeah heheheQuote:
Originally Posted by CRXican