The Official Dual Core Opteron Overclocking Thread

Printable View

Show 100 post(s) from this thread on one page

04-07-2006, 02:09 AM
Evil

Quote:

Originally Posted by knob

how do i do it?

Advanced Chipset- SSE/SSE2 Instructions Enabled at def. Change it to disable. It´s not a good thing, you´ll prolly lose some performance and some things will not run but it should make your cpu more stable. I found this thing when i first switched from Ultra-D to Expert and it couldn´t run prime at the clock it used to run with Ultra-D. I tried everything with Expert but no matter what i did it still failed instantly on Expert. But after changing that setting it primed like it did on Ultra-D. Just so you´d know i ran 2,8GHz 1,375v on Ultra 12 hours prime, on Expert it needs at least 1,425v for 2,8ghz.:(
04-07-2006, 03:40 AM
Emperor

Quote:

Originally Posted by Pete@X

Pics .. well .. not really as it`s more or less a mess around the testbed :rolleyes: ...

Here is a pic of the block i use on that babe without the ihs:

(NexXxos XP Rev 2) :clap:
http://www.alphacool.de/xt/images/pr...ages/639_0.jpg

@RMS
never would do that ;) - more likely -> :toast:

"Small" Update on my 0550VPMW ->

:clap: :clap: :clap: :clap: :clap:
10x330@1,536@chilled water (15c) :woot: :woot:
http://img402.imageshack.us/img402/1...37658xm.th.jpg

:clap: :clap: :clap: :clap: :clap: :clap: :clap:

where did u get/buy this waterblock ?
04-07-2006, 06:09 AM
skogkatt

0609 Fpaw

I just received my 170 0609 FPAW. Stay tuned for results. I hope the memory controller will go higher than the one from my 0550 VPMW, which is limited to a pathetic 240 Mhz :(
04-07-2006, 06:12 AM
ChkDsk

Quote:

Originally Posted by skogkatt

I just received my 170 0609 FPAW. Stay tuned for results. I hope the memory controller will go higher than the one from my 0550 VPMW, which is limited to a pathetic 240 Mhz :(

CCBWE or CCB1E... ? :cool:
04-07-2006, 07:14 AM
skogkatt

Quote:

Originally Posted by ChkDsk

CCBWE or CCB1E... ? :cool:

CCB1E.
04-07-2006, 09:04 AM
ChkDsk

Quote:

Originally Posted by skogkatt

CCB1E.

:toast: Join the club! Currently at 6hrs dualprime at 3000MHz @ 1.5V :banana:

http://img313.imageshack.us/img313/2...3min8vr.th.jpg

Stopped it here...
04-07-2006, 10:40 AM
revenant

Quote:

Originally Posted by knob

if memory serves me correctly, it was 2.7 or 2.8 at 1.360

ok - thx, sounds very par with my chip... I am hoping for similar results.. (or better if my chip is willing :))
04-07-2006, 10:40 AM
Lastviking

Stepping recived from monarch know was "CCBWE 0607UPGW"(165) got it today. Order placed around 2006-04-03
04-07-2006, 10:52 AM
Repoman

Quote:

Originally Posted by Lastviking

Stepping recived from monarch know was "CCBWE 0607UPGW"(165) got it today. Order placed around 2006-04-03

Retail? If I'm not mistaken you have to get an OEM to get CCB1E.. am I right? And of course the now expired coupons make it a nice deal.. I'm hoping the coupon accepted orders mark CCB1E 0608 steppings :woot: Because that's what I got
04-07-2006, 10:55 AM
dave_graham

CCB1Es are definitely available retail. i sold 4 of them based on a retail box shipment.

dave
04-07-2006, 10:56 AM
Lastviking

Quote:

Originally Posted by Repoman

Retail? If I'm not mistaken you have to get an OEM to get CCB1E.. am I right? And of course the now expired coupons make it a nice deal.. I'm hoping the coupon accepted orders mark CCB1E 0608 steppings :woot: Because that's what I got

K maybe you have right its a Retail :slapass:

Dave any updates for me?:)
04-07-2006, 10:59 AM
Repoman

Quote:

Originally Posted by dave_graham

CCB1Es are definitely available retail. i sold 4 of them based on a retail box shipment.

dave

I wasn't clear on that, I meant you have to get OEM through monarch to get CCB1E 0608. Retail 165's from monarch seem to be CCBWE 0607

Not talking all around here, just this one shipment it seems
04-07-2006, 11:04 AM
Lastviking

Anyone know if returning works with monarch?
04-07-2006, 11:07 AM
thunderstruck!

Quote:

Originally Posted by Lastviking

Anyone know if returning works with monarch?

I never order from Monarch. I tried to get a refund on a order they screwed up on and it took them over a month to get me my money back. They even charged a 15% restocking fee even though the order never shipped!!:mad: GL....
04-07-2006, 11:09 AM
Lastviking

Quote:

Originally Posted by thunderstruck!

I never order from Monarch. I tried to get a refund on a order they screwed up on and it took them over a month to get me my money back. They even charged a 15% restocking fee even though the order never shipped!!:mad: GL....

K thx for the info i think i need to sell the cpu instead then, anyone know how the CCBWE 0607UPGW clocks?
04-07-2006, 11:11 AM
licken

Removed the IHS on my new opty 165 today. Not great stepping but now i can go 2.8 with 1.55v. I need 1.62v to do that before. That some great results. :toast:
04-07-2006, 11:39 AM
Repoman

Quote:

Originally Posted by Lastviking

K thx for the info i think i need to sell the cpu instead then, anyone know how the CCBWE 0607UPGW clocks?

Try it out, haven't seen anything from that one before
04-07-2006, 12:18 PM
Lastviking

Quote:

Originally Posted by Repoman

Try it out, haven't seen anything from that one before

Found one with it(that cpu was from newegg) but it was DOA :/ , hmmm its fun to try new steppings..
04-07-2006, 01:21 PM
865pe
CCB1E 0550 VPMW ;) 1.424v@2950mhz 2x prime small FFT ( All air cooling ) :toast:
- http://img299.imageshack.us/img299/7...shot0140ri.jpg
04-07-2006, 09:23 PM
ChkDsk
Quote:
Originally Posted by 865pe

CCB1E 0550 VPMW ;) 1.424v@2950mhz 2x prime small FFT ( All air cooling ) :toast:
http://img299.imageshack.us/img299/7...shot0140ri.jpg
Come up with some 12hr shots :D 35min is just about nothing. And hell, I can tell you.;) Been screwing around for a day to get mine 12hr stable :slap: Nevertheless, 0550VPMW are still killers... I can only match the average 0550VPMW :cool:
04-07-2006, 11:12 PM
skogkatt

Not all 0609 FAPW are made equal...

My experience with my CCB1E 0609 FPAW turned out to be a big disappointment, comparing with what others here can reach with this chip.

I had to bump Vcore for the first time at 2700, but it didn't worry me too much. I had my first doubts at 2750, when both cores failed dual prime. A new voltage bump got it right, but 2800 needed 1,5V (1,45*104%) to only boot in windows. Prime fails immediatly, followed by a BSOD.

For info, temperatures were always under control (28C idle, 36C load @2750), memory ran with 133 divider, and I bumped a little LDT and chipset voltage (shouldn't have any influence, but you never know :) )

Back to my 0550 VPMW...

Edit : The stepping is FPAW, not FAPW as in the title...
04-08-2006, 12:20 AM
865pe
ChkDsk :fact: 6 haurs.. priority 9.. (2.95ghz@1.425v Air cooling) .... please run only torture small FFT.. 9 priority :stick:
- http://img113.imageshack.us/img113/6...shot0168yh.jpg
04-08-2006, 05:20 AM
noktekniq

1 Attachment(s)

opteron 170
0546xpmw
300x9. ram at 1:1 ratio
1.5cpuvid x AutoVidSpecial
load 45-47C
all on air zalman 9500

not the greatest. but i'm sorta happy. i will try different settings for 2.8
04-08-2006, 07:29 AM
thunderstruck!

865pe: Actually Large FFTs are more stressful on the CPU because the mem controller is stressed too. It gives off more heat and makes the temps go up 2-3C on my 0550vpmw than running small ffts.
04-08-2006, 08:13 AM
furyfax

Finally got my temps severly down! Looks like my chips likes sub 40C degrees.
Ran loops of 3dmark06 at this setting and seems stable, but havent had time to prime it yet. Max temp on CPU was 38C degrees at these settings..

Show 100 post(s) from this thread on one page