GAY CPU GAAAAAAAYQuote:
Originally Posted by alpha0ne
Printable View
GAY CPU GAAAAAAAYQuote:
Originally Posted by alpha0ne
hehe :D Thx both Alpha and Gautam :toast:Quote:
Originally Posted by Gautam
Actually, I'm fighting for the lowest time @3.6GHz with these sticks @600MHz 4-4-4-4... Weird thing that it needs at least 2.5V to run stable @600MHz CAS4 while it ONLY needs 2.09V to do so @614MHz CAS5 :( Also, 2.6V results in less stability (at least for 32M calculations).
So close to sub 13mins :D
http://img501.imageshack.us/img501/4...m04672sse4.png
Interesting...no way that can really be cas 3...but it does seem to perform better than CAS 4. That's the fastest 3.6GHz time I've seen by a couple of seconds, and that too with only 2x512!
Lower tRFC possible?
yea, it's a Biostar bug... it missreads CAS4 (set into the bios of course) while running 2:3 ratio.
tRFC=28 seems the lowest possible.
I've been able to save few seconds up to 6.9GB copy-waza. (1.6GB more resulted in less stability: crashes or worst times)
oh i thought that was cas3.....these times are even more awesome then :toast:Quote:
Originally Posted by before
6.9GB??? :eek:
Seems well worth it though, that time is just flat out amazing. I wonder how you'd do with 2x1024. :eek:
yeah he's got some supertweaks going on :DQuote:
Originally Posted by Gautam
Thx my friends :toast:
I'd love to try with a good 2*1024MB kit... my bro Quent is going to send me a kit of Corsair Dominator; may be sub 13mins @3.6GHz will become reality then :p:
Here's my lowest CPU clock to join the sub 13mins club. :)
http://img412.imageshack.us/img412/7...m59688sbx9.png
YES! 11sec [IMG]http://img218.imageshack.us/img218/3...mincpuzkc5.jpg[/IMG]
this takes about an hour on my athlon 64 x2, lol :D
when i get the time, i'll see what i can do
*thinks about crappy ram, crappy cpu and dfi expert mainboard*
i'm in for the 40.xx min contest :lol:
nice one coop :)
got one with the 17.xx category with allendale and some elcheapo micron sticks doing 600Mhz 32M :D
Not optimised yet but a start heh
http://img128.imageshack.us/img128/7...5661524xv4.jpg[/B]
I decided to try this out. :)
Unmoded p5b-dlx, no tweaks except pagefile ~160mb, old Windows XP install.
13m37sec SPI 32M (can't do SPI at higher ram speed, I need to Vmod the board for 600mhz ;))
http://i15.tinypic.com/35aw6ja.jpg
page file = 160M
how much of a gain did you see with this tweak
I never tried with bigger pagefile, I always close useless programs before running SPI.Quote:
Originally Posted by dinos22
But I will try tomorrow to see how much gain it gives. :)
dinos, rick fx, I'm still here. I will update on Sat. Thanks dinos.
14.xx with Allendale :)
E6400 @ 404x8=3232MHz, 4:5 505 4-4-4-4-4-20-4-9-4-9 with Asus Commando (1066 strap), 14m54.328s
Without Copy Waza (OS on FAT16 partition ;))
http://img239.imageshack.us/img239/9...3232mhzeb2.jpg
what the heck OS on FAT16 partition DO TELL MORE PLEASE
nice time btw :cool:
FAT16 is not really important, this is only the explanation why Copy Waza was impossible. In fact, it is not important at all ;).
I have very non-Pi partitioned HDD so for Pi OS there was only a couple of GB - so FAT16, why not ;), now I can flash with EZFlash without FDD :).
Just a not-really-well-tweaked (registry is absolutely not tweaked - I'm not good in it...) OS.
Tried with higher FSB but 4:5 and 1066 strap is very hard combination, even on Commando with ~2V @ NB...
My best 32M was 12m30.3xxs, 498 FSB @ 1066 strap :) (CPU is capable of ~510 FSB, NB is limiting).
Update with better scores :cool:
Ram only at 500Mhz 4:5, for now.
I will test 600mhz 2:3 after I do Vmods this week :)
Ram timings in notepad
Only tweak used is "kill explorer.exe"
SPI 32M --> 13m25.468sec
http://i12.tinypic.com/2dhboeq.jpg
rick, a better score does no good unless it is done at a lower speed. Then only if it comes in under the "minute" mark. Also 1m pi's don't belong here. Slow your speed down to whatever to make 13min 59sec. etc.
LOL i stopped counting how many times we've all mentioned that to everyone.........maybe a bigass RED BOLD letters on first post might do the trick LOL hehehQuote:
Originally Posted by coop
Ok, SPI 1M results removed, sorry about that. :)
Your request is very vague and should be more specific in your first post. ;)Quote:
Originally Posted by coop
Here are couple suggestions: :)
Maybe you could start off your 1st post by mentioning that scores must be between a XXmin55sec - XXmin05sec bracket or XXmin50sec - XXmin10sec bracket and that all scores not respecting this criteria will not be added to the list. Also, maybe remove all existing scores that aren't within the time brackets.
Example: (using scores already in the first post)
13m50sec - Goal:14minutes - 14m10sec
3604.1......camouflage...............13.52.609
3596.3......alpha0ne...................13.54.297
3600.9......eva2000....................13.56.422
3800.1......dinos22................... ..13.57.187
3392.2......bachus_anonym...........13.57.485
4000.........funkflix.......................14.03. 781
I hope this is helpful :2cents: :)