Printable View
First aware from assrocks, assrocks dont rox.Quote:
Originally Posted by quandasar
Second, you must overclock your ram. Even if you got value stick, set 2.5-3-3-6, an up the frequency.
Third, as i see, your SD are running on low voltage, so you can up volts a bit.
Sorry mate, i was too lazy to correct my sig. I did this run with my redlines, because i found out that my FX dont want my old school BH5. dunno why :mad:Quote:
Originally Posted by coop
btw i broke the 22sec with the redlines.
cu
i just got a 3700 its a wekk 48 2005 with KAB2E. will this be a decent overclocker. im gonna put it in when i ge my new case ram and HSF
Hi guys i am very new to this but heres a list
thermaltake armour case
amd 4000 sd
2gig ocz gold pc4000
abit an8 ultra sli
150 gig raptor
gigabyte liquid cooled
6800 ultra ok i have clocked it and 3048 and it is stable at abot 39 c using abits guru what i want is good timings and volts for this set up and although i have cpu-z i am not sure what they relate too in the cmos as the terms are different if anyone can help please post and/or e-mail me
ALLENDYE1@BLUEYONDER.CO.UK
Thanks
ps how can i put up a pic to prove it
Welcome to XS forum Shamenmbc. You can upload pics using great site called imagehack http://www.imageshack.us/
helpQuote:
Originally Posted by KViper19
Alrighty, got my sucker well stable, I know I can push more voltage through it and get it higher, but on Air at this stage so this'll do for a 24/7 OC:
3700+ San Diego 939
ADA3700DAA5BN
KABYE 0542 FPMW
@ 2805 MHz, 255 FSB x 11
VCORE = 1.525
CPU-Z validation: http://valid.x86-secret.com/show_oc?id=76680
Air cooling with Zalman 9500 - 45 degrees load, 33 degrees idle
Prime95 stable for 27 hours (see screenie)
Memory = 2 x 512 MB 3-3-3-8 2T @ 200MHz - Noname (Jade Star Technologies... heh ;))
Running at 2-2-3-5 1T @ 200 MHz - 166MHz divider (CPU/14)
Memtest86+ Stable for 19 hours.
MoBo = EPoX 9NPA + SLI
Lovely, the numbers on this work out so damn nicely, got LDT multiplier at 4x to give me a 1020 MHz HT - oh god it all just fits into place doesn't it :D
http://img221.imageshack.us/img221/3334/bug1io.th.jpg
Can anyone say why CPUZ isent showing CPu brand and so on ?
You got the same problem as me... Please, try to run AMD64 Tcasemax to see the real core, mine is a Toledo (at least is what the program tells me).
It says Toledo :S So i taught i had San Diego and now i got Toledo instead of it :(
Got ourselves a cpu with a 2 cores, 2nd one is disabled, probably based on some Toledo that didn´t pass all tests...
I got a san diego 3700+ from the Egg the other day to try in this EPoX 9NPA3 Ultra I have been messing around with:
http://img129.imageshack.us/img129/9...t1acrop6kj.png
There is 1.61v on the core. It isn't showing correctly. I put my old crucial ballistix with it so I would be sure to not be limited by my ram. The ballistix is good for 306. I need to tweak and tighten up timings and it looks like a flat 2.9 at 1:1 is going to be it for this chip on air. Not bad for 211usd for the chip and 85usd for the mobo. Also I am on MCE 2005 :p which isn't known to be the most stable OS for overclocking. Full detail of the crop above is below. Click to enlarge.
http://img129.imageshack.us/img129/4...st1a3bo.th.png
I plan on testing this chip in gaming vs my 4400+.
0549MPMW batch 0042
does 2.85Ghz with stock voltages and 3.1Ghz at 1.5V
aircooled of course
http://img501.imageshack.us/img501/6078/crop1dp.th.jpg
next step: remove IHS, use high performance fan and run the RAM 1:1
I think for a jump from 2.85->3.1(250MHz) on air you should have more voltage to it about 1.6 in my opinion.
If it is stable at 1.5 (your cpu-z says 1.52 which in my mobo is 1.55 at least)
then it can be stable at 2.95 with 1.4...is it?
Probably, I only tested stock voltage, 1.5V and 1.55V.
And I only want stabililty during benchmarks, ie spuperpi and pifast stable.
I'm not saying that all this is prime stable.
If it scales further like this, we'll see 3.2Ghz @ 1.6V tonight
Well i found CCBWE 0544TPMW on a San Diego core.
Seems very strange as this step corresponds to
Opteron Dual Core cpus.
Check this out:
http://wiki.extremeoverclocking.com/wiki/Opteron
Maybe we have some hybrid core? LOL
I have the same as you! Mine corresponds to a Toledo!:DQuote:
Originally Posted by Spyrus
ADA 3700 DKA5CF
CCBWE 0542VDMW
Please post results.
I think it is a bad overclocker.
I really don´t know on my 939Dual-Sata2 i can´t get it higher than 235mhz no matter what i do.
But i really think that this is related to the motherboard as if i get past the 235mhz, the computer won´t boot. Until i try it on another motherboard, i can´t tell if it´s a bad overclocker or not.:mad:
Well it seems that it is a Toledo but with second core disabled.
If you can find a way to enable it then you have a nice dual core cpu.
But i think that fact make the chip a descent overclocker.
What temps do you have?
Finding a way of unlocking the 2nd core would be sweet! As i´ve bought this cpu for 215€!
Now for the temps i got with my XP-90 and a NB SE2, NextSensor reports 47º now at full load, and it´s kinda hot today.
I think that this is a rather high temperature for a San Diego, don´t you think?
Phantasia: With what clocks and voltage u hit 47*C at full load ?
I run Prime95 @ 2650mhz 1.6v and hit 50*C
I´m usually folding 24/7, at stock voltage (1.45) and at stock speed(2200) since i can´t get a decend overclock from this motherboard. Right it´s around 27º outside. And i have all intake fans off.
This is weird, now i´m sure that this is a weird temp for a San Diego...
I tested my Sandy 3700+ for a bit today. The only bad part about this cpu is the ****ty IMC. It cant and wont handle 290+ 1:1...
But I finished 300*10 @ 1.48V with a devider tho.
I used the following rig:
AMD San Diego 3700+ KAB2E 0546 GPBW
DFI nf4 Ultra-D Modded to Sli
704-2BTA Bios
2x512Mb GeIL TCCD Week 525
Sapphire X800GT
Zalman 400W PSU
http://img78.imageshack.us/img78/8510/3ghz148v9vn.jpg
Ill try with bh-5(max 275ish @ 2-2-2-5)next week.
Regards
X3RO is it 3d and gamestable at those speed ?