Printable View
:D Hey Andy, my OCZ PWSTRM 520W is still alive, only board has been DOA.Quote:
Originally Posted by andyOCZ
But I wonder about a lot of exploded PSUs connected with the DFI NF4, so is there an issue I should know before my RMA'd board is back?
Don't get me wrong, I never had a problem with OCZ products but I still feel really pissed because of the DOA board so I want to avoid a damaged PSU on my second trial......... :toast:
If I change the memory timings(upper half of DRAM Configuration) when the memory is set to asynchronous, some errors occur in Memtest.
If I set the memory to synchronous once, change the timings, and set it back to asynchronous, the errors don't occur.
So I have to change the timings when the memory is set to synchronous, reboot, and set it to asynchronous.
I'm sorry for my bad English.
there has been a lot of things in this thread...cant anyone just make a resume for the most common errors and solutions...and important tricks and bios settings and versions
The best I can say is that I have an off the shelf board that I purchased at Fry's and a 600w Powerstream PSU that came off the shelf at OCZ. I'm running SLI and have no no issues at all. I have 2 x BFG 6600GT OC and got 7385 in 3dm05.Quote:
Originally Posted by HARDCORECLOCKER
why doesnt the stupid ntune show cpu temp... its done this before and i forget what i did to fix it.. i think i reinstalled but that hasnt done it this time.. its only showing gpu temp at the mo.. any ideas>
:D THX Andy, so I'm looking forward to get a running system.... :toast:Quote:
Originally Posted by andyOCZ
hello,
I'm having a lot of problems with this mobo :( and maybe you can help me :)
well, i'm with the bios 218. (Bank interleve is dissabled)
winchester 3000+
2x512MB XMS 3200 C2 rev4.1 (They're supoused* to be TCCD)
1) i can't boot with a different multiplier than 9x or 5x :eek:
2) My i can run for 350 passes the test5 of memtest at 285Mhz 2.5-4-3-10-1T and then i can't even run spi 8M :( . Can i trust memtest?
3) i can't bott with HTT higer than 265 :s , what i have to do is to boot with 5x multiplier and then in windows set 9x with clockgen
I Dont know guys, DFI it's said to be the best mobo, but I've never had this kind of problems with my Neo2. So it would be very great if you gould help me
i don't know maybe there is a jumper i've in wrong position (I havent switch any) as it happened my with a soltek i had
*) I'm sorry, my english is very bad
Could be your ram to board compatible issue.
The dfi Ultra is 5x better then the Neo2, in my case it is. My Neo2 hated my BH-5/6 rams no matter which bios I tried, the dfi is loving them.
Also I am using the 520w OCZ and have reported no issues with this psu. :cool:
maybe, anyway i'm waiting for 1GB of twinmos sp. i hope not to have all this problems
Don't worry.. I can't boot with 7x multiplier... I reckon it's the Winni's memory controller...Quote:
Originally Posted by steve-0
Stability in MemTest does not guarantee stability in Windows.. it gives you a rough indication of what's probably stable... SuperPi 32M is a good indicator :)
Quote:
Originally Posted by Xcalibur
ok thank's :) . well, some improoves here. with OPB's timming settings i can run spi 8M at 272HTT (2.5-3-3-6) but i can't even boot at 275HTT :D
do you think that maybe is because i have a 20 pines PSU? would it be a difference with the 24 pines adapter?
Cheers :toast:
No i think PSU is not the problem. I'm currently using Antec True Control 550 which is a 20 pins PSU and it works fine. All voltage rail are over the requirement. And i can run @ 300HTT without problems.
PS: Plug all power connector to MB and lower HTT Ratio, with over 250, set it to 3x :) . If u want over 1000Mhz HTT bus, try to increase LDT/HTT Voltage tto 1.3 or higher ;)
i'm going to buy DFI NF4 ULTRA-D soon
does my TAGAN 480W PSU suits enough ? in terms of 20/24 pin connector ?
Hey, I've started getting the same thing!! Initially I had the 4-pin molex power connector plugged in, and everything was fine - i took it out, and then this started happening *I think*, so I've plugged it back in, and am still testing to see if it will crash.... Give it a try :)Quote:
Originally Posted by brassen
Anyone tried going up more then 3,8v?
At 3,9 windows won't boot...if i change to 3,8v everything works like a charm!
Tried boot at default, boot with oc, boot with default settings then change with a64tweaker, boot with different timmings, try raising the 12/5/3,3v rails of my 465 enermax the same, LDT and Chipste voltage max, pci-ex at 105 (ati card) none of this works...
Any idea?
btw does it worth buying a 20 to 24 atx pin adapter to use? I know this is not the reason why 3,9v aren't working cuzz i have a friend with the same problem with a 520w ocz psu...
Got to try 3,9 and 4v to see if my bh-5 scale a little more ;)
http://img30.exs.cx/img30/5704/bh5power0zp.jpg
got a question. does anyone know what the pci express frequency is for in the bios? it's default setting is 100mhz, and you can up it to 400 somthing. has anyone messed with it? i've seen someone set it to 103. dont know why tho.
TG480 U01 here works like a charm ! ;)Quote:
Originally Posted by TEDY
That's only got 24A on the 12V rail -- right?Quote:
Originally Posted by ValkyrieLenneth
Snowice - Im wondering the exact same thing, gfx's supose to run 100mhz I've heard... But I read the other day on a site, dont remember which... - That 105 for x850XT should be good, havnt tested it though ;)
As well I wonder.... In the menu where you set first priority device etc... - Theres something about a size - Some ppl say It's supose to be set to 256 - the memory amount on gfx... But standart is 4096...
Im a bit confused.....
As well there's other things that gets on my nervs... - The board requeres more vdimm for my ram than A8N-SLI... And they "max" out 20 mhz lower :(
Another thing that I sadly dont remember with my A8N-SLI... - Was the max Async time... - Which according to Tom H's SuperPI guide should be quite important - On the DFI card, I cant get it to boot at 7 - 8 is minimum - at lower than std. speed (for mem)
this problem could be solved by moving usb jumpers to 5vSB instead of 5v...look in the manual for those jumpers.....it seems to solve the problem for most ppl.Quote:
Originally Posted by brassen
how about the internet problem??? which rev boards has it, what bios are you using, and what have you tried?.........i know someone descirbed something about putting the MAC adress into bios manuelly.......just cant find it in this big forum.
another problem with a solution was something about settings in bios, and somethings you would have to change 1 setting and save in a special way.....
any of these problems that has been solved with newest bios (218 AFAIK) ???
Come on, lets get a resume of this thread about most common problems and their solutions!!!
I have some trouble with overclocking the DFI nf4 sli-d. This is probably noobish and the problem is me not setting some bios settings correctly, but I will give it a shot anyways.
Using the 209 bios, winchester 3500+, 2x512 TwinMos Winbond UTT and bequiet 470W.
My temps should be fine with XP-120, but when I put the multiplier to 11x and start raising the HTT with clockgen 5Mhz a time with 5-15 minutes of superpi in between (Prime95 crashed much sooner) Windows crashes before I reach 220. Now, I'd imagine it'd go higher. What am I doing wrong here?
My PSU is a 400W northQ, only think it got 15a on 12+
Can that be an issue?
OK, when I first got my board, before I got my BH6, I was running some OCZ 3700 Gold rev 3, with hynix chips, at 250htt. Its been out for a while, but I put it back in for some testing. Switched back to 3.3v for vdimm, cleared cmos in the normal way, loaded default settings, and couldn't get above 210htt! WTF! Tried rolling back to older bios version, no go. Started up A64tweaker, and noticed Max Async Lat was set to 5ns (auto in bios). Set it to 7ns and I'm able to get to 260htt 1T! :toast:
This brings me on to a problem I have... What is limiting my RAM O/C? Both sets of ram (BH6 and hynix) reach 260 1:1. Neither will do 262. I had the hynix at 270 2T on an Asus SLI board, so would expect the same on this board, but nope, makes no difference set to 262, and reboot.
Memory controller?
Anyone experience weird temps between different cpus ? I tried several remounts and this is what i get
now i swapped to 3500+ 0441 TPAW and cpu temps are high again even after 6 remounts!
3200+ CBBHD 0450 UPJW
@2700mhz at ~1.6v
CPU idle = 41-43C
CPU load = 51-56C
3200+ CBBHD 0445 VPMW
@2700mhz at ~1.6v
CPU idle = 31-33C
CPU load = 41-46C
3500+ CBBFD 0441 TPAW
@2700mhz at ~1.6v
CPU idle = 38-43C
CPU load = 51-57C
cooled by MCW6002 + MCP650 + MCP600 in series with Thermochill 120.3 with 3x 120x38mm Panaflo 103cfm fans
room temp 29-33C
geeze what are you doing with them...
i want this one
3200+ CBBHD 0445 VPMW
@2700mhz at ~1.6v
CPU idle = 31-33C
CPU load = 41-46C