Official GSkill 1gb-GH pc3200 2-2-2-5 info and results

gsan : I give you my A64Tweaker's parameters, you can try this if you want :)
(because I think you have strange parameters like TRRD, TREF...)

http://img375.imageshack.us/img375/2...nshot9y.th.jpg

Quote:

---

Originally Posted by Santo

gsan : I give you my A64Tweaker's parameters, you can try this if you want :)
(because I think you have strange parameters like TRRD, TREF...)

http://img375.imageshack.us/img375/2...nshot9y.th.jpg

---

Santo, before the "sick" stick got problem, i was able to run dual channel 258 with the same timing and memtest error free for almost 6hours. But will try your setting later and see how's going on.

just bought a set of these, i got an 0508 set
been playing with them for a little while, got 255mhz stable so far
http://img115.imageshack.us/img115/1...0bh52fl.th.png
motherboard monitor has been changed to display the voltages i set in the bios (dunno what happened with cpu-z)
anybody have any tips?

well with my rdx200 it's so completly different to overclock the ram.
it's killing me!!!
http://img107.imageshack.us/img107/8...m2409hx.th.jpg

so far so good.....but u won't believe if i tell you that 5 minutes after this 16m-run the windwos freezed and after reboot i wasn't even able to do 1m.
so this board is :banana::banana::banana::banana:in me up :D

i really need help with it.

mfg

Quote:

---

Originally Posted by gsan

G.S Technician,

One of my GH sticks got problem, only test#8 in memtest is error free, other tests give me errors, even at default timing and voltage. But the "sick" sticks still able to do 240 @ 2-2-2-5 with Prime, Pi32m & 3DMark stable.

http://img143.imageshack.us/img143/8...ulty7ho.th.jpg

When running dual channel, it also errors free in test#8 only. Test#5 give the errors at same address and size. But still can do 250 @ 2-2-2-5 with Prime & Pi32m stable.

http://img226.imageshack.us/img226/6909/250pi2tt.th.jpg

So, what happen with the "sick" stick actually?

---

Able to do 255 @ 1.5-2-2-5 at 3.5v. But still only memtest test #8 errors free. Already tried few different bios with couple times of different memory tuning in bios but the result still same here. why? :confused:

http://img96.imageshack.us/img96/856...01254bv.th.jpg

http://img96.imageshack.us/img96/466...01241pw.th.jpg

http://img119.imageshack.us/img119/5...01193pc.th.jpg

http://img96.imageshack.us/img96/375...01238dm.th.jpg

Anyone tried two sets? ie 4x512mb?

Quote:

---

Originally Posted by goreblast

Anyone tried two sets? ie 4x512mb?

---

Bachus tried two sets and result was good :)

I ask as I cannot get it to run at 200HTT 1:1 with T1 command rate

good results

look sexy, anybody have any results for 260fsb ddr520? trying to find something to replace my ballistix, they did 260fsb 2.5-2-2 at 2.9v:D :D

Well, most of the sticks do 250+ Mhz, 260 won't be too hard. This is what my best pair can do :


http://img7.imageshack.us/img7/6275/2861yp.th.jpg

they look pretty nice:cool: but how much voltage for running about 260? and also, what type of cooling u got in it?

I've used good aircooling, about 0C did the job :)