Printable View
A big shout to this thread that got me started in this dual craze. :banana:
Got myself a pair of 1.6 LV and a NCCH-DL.
I am expecting some more stuff before I start building it (like the passive Coolermaster Heatpipes). :)
Thanks guys.
Regards from sunny Athens
:welcome: to XS!!!!! :banana:
Will you be joining us in D2OL as well?
Welcome to XS. And same as Rod, will you be joining the D2OL team? Glad to see a new face and one that's jumping right in with computers :D
jjcom
Well I am on the www.distributed.net since 1998. I think I will stick to that for some time. Maybe I will through a computer or two on the D2OL.
Thanks anyway for the invitation. :)
Alright, I'm stable at 15 x 208.1 = 3123MHz
PC-DL U-Wire Mod
2x 1.6LV
OCZ Powerstream 520W
Maxtor DiamondMax10 16mb cache 300GB
CorsairXMS C2-Pro 512(Other Stick was Defective)
Old eVGA 5900SE
LG DVD Burner
But I want more speed :(, I can post at 3.6ghz no problem, it won't go into windows but it posts, is there anything I can do to get a stable 3.2ghz or higher? I need more voltage :|
Thanks.
Is there a Vmod for the DH800? I am going with watercooling so I would not be against going as high as about 1.75V.
Im almost ready to get mine online. Waiting on the case and new psu.
With 4 Instances of D2ol on Win2k AS running, what would my output be say at 3.2 ghz per cpu? You guys arent seeing 4 CPU's in Winxp, correct? I dont have a copy of 2K3 server to run.
I think with windows XP u do see 4 cpu's. With a 3.2 ghz xeon setup, I wouldn't be surprised with above 300 daily.Quote:
Originally Posted by The Mofo
XP sees all 4.
2K Pro doesnt.
2K3 Server does.
2K Server sees all 4 also but I don't think it likes HT
2K Server does as well.
Thank you Jeff, for writing this article, and thank you to the contributors, and help from all the people in this thread.
I have successfully built a very good workstation, as my main rig, with this guide.
1.6LV D1 @ 3.2 (16x200 @ 1.6V)
ASUS PC-DL
2GB KINGSTON VALUE RAM PC3200 ECC
ATI RADEON 9800 PRO 128MB
WD 74GB RAPTOR
SEAGATE 200GB 7200.7
THERMOCHILL 120.3
DD TDX 1/2" BARBS
100% LOAD CPU 1 96F CPU 2 98F VRM 122F
Will these work for the 1.6 LV CPUs and a PC-DL?
yes those are iwts so the stock heat sink for pc-dl boards. on a side note you can also easily mod the nonoca passive hs to work which should give good temps with a 120mm fan above them. ill get pics up later this week.
Ahhh yes... but can it run D2OL? :cool: :stick:Quote:
Originally Posted by MTXR
Its so hard to find the lv xeons, whats the next overclocking cpu.
Thanks
theres a few 2.0 lv d1s on ebay atm
Can I get people to list the stepping of their 2.0 LV Xeons, 2.4 LV Xeons, 2.4 LV "ES" Xeons, or any other LV Xeons? I'd like to add them to the beginning of the guide now that the 1.6GHz LV Xeons are all but history. :(
TIA :toast:
I'll look into serlv's 2.4ES chips for ya.Quote:
Originally Posted by Jeff
Right Im a little confused with the vdimm (vddr) mod on the PC-DL :p: Not really a vmoder tbh.
http://home.earthlink.net/~adventurevision/Xeons/X9.jpg
Do I just connect pin 6 and the back point shown with a 10K vr? or pin 6 to any ground point like the screw hole next to the IDE connector?
How bout this way...
http://home.earthlink.net/~adventure...ons/X9-alt.jpg
There is nothing going on in the center is there? I mean connecting the leg on the mosfet then to the center point of them 3 pins via a 10K vr, thats it? The glue in the middle of the 2 wires is just holding it down... there is no actual solder point there to a res/bridge is there?
2.0 lv is sl6xl
My 2.0LV Xeons are SL6XL Costa Rica's.
@Bennah
You connect pin6 or the middle solder pad to pot and ground!
EDIT:
I'm thinking of putting individual heatsinks on VRM glued with artic alumina!
Has anyone tried? Does it works?
Thanks. I'l hook up the VR to the middle solder pad, easier ;)Quote:
Originally Posted by Beat_Slayer
Whats the wire hooked up to the mosfet leg then?
Ground!