Printable View
Thanks Stasio. I was playing with F11c over the weekend as Giga said it fixes the LSI raid card issue. I did not notice the USB issue there, but, it did disable the first PCIe slot. Went back to F10.Quote:
Try F11c .
Usually for me loosing power on the USB devices is unstable setting.
This usb problem happens even on stock settings, no overclocking.
I'm still having trouble with S3 sleep state... most of the time when I try to bring the PC out of sleep it restarts and then has to recover from a crash, but does not BSOD so there is no crash dump for me to analyze. Anyone else having this problem?
Well, some good news. i got my X79-UD7 to work yesterday:shocked: Tried over and over all the things suggested in this thread. But that didn't sole the MB..
So just by accident, i thought i would try it with nothing connected. And at this time the heat sink was only standing on the cpu on its own. No bracket on to hold it down..
And then it happened, i saw some number on the debug display i haven't seen before. And then BEEP it started and i got a picture on the screen.:eek::clap: I couldn't believe it. But it was true.
Then i connected the keyboard and it started. Still without the fan. Then i hooked that up and it started.. And after that i found a hdd hooked that up. But now it didn't start. Not if i cleared the cmos.:shrug:
So then i disconnected everything and tried again, but nothing. And here's what it is. Someone said the socked might be pressure sensitive. So i lifted and moved the heat sink a bit. And guess what, it started up.
My board then with standard bios, is cpu pressure sensitive and cpu fan connected sensitive.
I mounted the bracket and got it to start. Turned it off for some reason. Then it didn't start again. Unplugged fan, but no.. Started to move the heat sink. And ta-da it started.
Now it's up and running win 7 64bit, only 1 stick of ram yet, 1 ssd, 2x7970's.. and the wifi card..
I hope this can help others, if there are any that still has this problem..
Now my question is this. What bios should i upgrade to. One for the main bios and another for the second one..
And last a pic of my getto setup now just to show it stared and is running. If you can't see the pic, let me know. I'll put it in a different album.
http://img.photobucket.com/albums/v2...505_222532.jpg
I just fired mine up with a 3930k and temporary watercooling system (480 koolance with 1500rpm fans, and a passive 360 SR1) was getting idle temps (in Bios) of 30degrees. im guessing thats good, considering my actual loop is going to have 2 quads and a 360.
But i wanted to ask, what bios should i update to? i left off at F8... im guessing we are far more ahead by now.
Anyone have some good settings for a 3930K @4,5Ghz? Sill on air running with a PHANTEKS PH-TC14PE cooler
Mem: G.SKILL RIPJAWS Z F3-17000CL9Q-16GB: CAS Latency 9-11-9-28-2N
2X7970's Gpus inn a Switch 810.
Bios is the F11e beta
Does anyone have a changelog for F11n beta bios?
Im having difficulty setting up my RAID0 Samsungs... It works about 30% of the time, but the resulting install is so slow... i was getting better results on a single mechanical drive... :/
Hello,
I just built my new setup with
I7 3960X
Gigabyte X79 UD7 OC Bios F10 & F11
4X4 G.Skill TridentX 2400C10
CFX 7970
Alim corsair TX750W monorail 62A
WD Velociraptor 150Go
Unfortunately I can't set my RAM to 2400mhz CAS 10 since my desktop keeps rebooting when I do it.
Tried XMP profile and same thing happens, same with custom mode.
Even 2133 doesn't work.
WIth another kit (Gskill Ripjaws 2133 C9 4x 2GB) I got no problem setting the RAM with the XMP profile @ 2133mhz.
Any thoughts?
Attachment 130142
Attachment 130143
Attachment 130144
did you try more VTT and IMC voltage? try like 1.25 on both.
hello
yes Profile xmp VTT 1.25 default
Attachment 130157
Attachment 130158
Attachment 130159
Attachment 130160
Trident
1866 Boot ok
2133 Boot No
XMP Vdim 1.65<1.70 2400 Boot No
Ripjaws X
XMP 2133 Good
test Asus P8P67M-Pro
4X4 Trident
3770K
Good 2400C10
Attachment 130161
Attachment 130162
Bum Help