Printable View
Hello guys!
Got myself a 0946 MPMW 955 C3.
Here are a quick SPI 1M with maxed CPU core an NB frequency.
Cooled with Infinity, amb temp 23°C.
http://img97.imageshack.us/img97/457...ii955spi1m.jpg
http://img704.imageshack.us/img704/6...pi1mnbfreq.jpg
Prime@3,9 GHz.
http://img189.imageshack.us/img189/5...ii955prime.jpg
:up: That's why we are called enthusiasts :D :DQuote:
Originally Posted by Tomasis
What is the default CPU VID? 1.375V?Quote:
Originally Posted by Moonman
Try the Prime in-place LargeFFTs test.:D
Yeah, default VID is 1.375 V
Running it ATM@3.98 GHz, 1.45 V.
Custom Water Holding cpu at 30C idle.Quote:
Originally Posted by Tomasis
im impressed! :up: that wc block looks quite odd for me. i've never seen it before but the result counts :)Quote:
Originally Posted by chew*
played with SS on my C3 with about -35C. i can bench the CPU past 5GHz 1M Pi...i think i did close to 5.1GHz 1M eeeeek...really solid chip it seems...........i'll add some LN2 soon :)
Prime in-place LargeFFTs with air cooling:
http://img33.imageshack.us/img33/256...i955prime2.jpg
Hooked up water cooling, they do like cold :yepp:
http://img163.imageshack.us/img163/2...primevodno.jpg
SPI1M:
http://img194.imageshack.us/img194/2...i955spi1m3.jpg
Max valid with all 4 cores, standalone version 1.53, captured using F7, rejected:
http://valid.canardpc.com/show_oc.php?id=905275
Nice one.:up:Quote:
Originally Posted by Moonman
You would not have ever seen it before it's still a prototype and one of a kind ;)Quote:
Originally Posted by Tomasis
Did you show a picture of it then? :confused:Quote:
Originally Posted by chew*
seek and you shall find.Quote:
Originally Posted by Zeus
Tnx!Quote:
Originally Posted by Oliverda
Water temp 19 °C.
It just looves the cold. temp down, voltage down, MHz up :up:
4 cores: http://valid.canardpc.com/show_oc.php?id=905896
http://img15.imageshack.us/img15/558...i955spi1m7.jpg
I saw what you did there ;)Quote:
Originally Posted by chew*
It looks like aluminium to me:Quote:
Originally Posted by chew*
http://chew.ln2cooling.com/corsair%2...orsair%201.jpg
Is it?
What would cause the NB to cause errors in Prime 95? If I move my NB up to 2200mhz, P95 fails on core 3.
965 C3 revision
0946 DPAW
Def. VID 1.4
I can run the core up to 3.8ghz on stock voltage, the minute I set the NB speed over 2000mhz, it crashes. I've set the NB voltage to 1.28.
I did some air testing today. I have a hot chip lol... I think this thing would love some LN2. Here is the 3d06 run, I have two Ultrakaze fans on my Xigmatek and it idles 38-40*C.
http://3800z24.info/Phenom/965/4.1ghz-air-3d06.JPG
Top is for temporary testing. Obviously not a good idea for longevity, if it gets a seal of approval final rev will be acrylic.Quote:
Originally Posted by Zeus
I think I know what this is.... :DQuote:
Originally Posted by chew*
When is it ready to go retail?
Vantage picked up some points going from 9.11 to 9.12 drivers.
I ran this a week or so ago @ 4.3ghz with 9.11 and only scored 14,000ish.
Today the garage is a lil warm, which is where my RAD is cooling with two 120's on it.
I only could get 4.2ghz.
Orb Link
http://3800z24.info/Phenom/965/Vanta...850-single.jpg
Got home and checked radiator -> 16°C.
I had to try :D
http://valid.canardpc.com/show_oc.php?id=906416
http://img710.imageshack.us/img710/8...ii955cpuz2.jpg
http://img710.imageshack.us/img710/8...i955spi1m9.jpg
Great numbers Moonman! Sub 15's on water is great! Who doesn't love Winter time? :DQuote:
Originally Posted by Moonman
Nice one moonman, another sub 15 on water joining the club. :up:
moonman :up:
Tnx guys!
I really hope that it'll scale nice under real cold:yepp:
Outside temp dropping, installing a fresh win xp and messing around with cpu tweaker till it gets cold.