Best DDR3 Memory for PHII

Printable View

Show 100 post(s) from this thread on one page

01-07-2010, 02:09 AM
Cele303

Quote:

Originally Posted by neo mike

Anybody try these sticks on AMD, i bet there hypers, and for the speed they look like a good buy, and i have always had good luck with Supertalent.

http://www.newegg.com/Product/Produc...82E16820609499

I would always go for Super Talent :up: This is the same heat spreader as Project X 2200 CL8, I wonder if there is any difference under the hood

Their 2GB WX200UB2G7 Project X 2000 7-7-7-21 1.65V looks awesome too me for OC
01-08-2010, 03:12 PM
FireDragon

I was just looking at those Super Talent myself, im debating on trying those out or just going for the new Corsair 2250 cas 8 GTX stuff, as my current 2000 cas 8 Dominator GT's wont do over 1720 ish stable at cas 6 no matter the voltage i throw at them

Dragon
01-08-2010, 05:53 PM
neo mike

Well the Corsairs are $150 more, not sure there worth it, i would try the Supertalents, good bang for the buck:D
01-08-2010, 10:56 PM
ah_khoo

my attempt on crucial value ddr3 1333 cas 9, volt is a 'lil bit high imo but not bad consider d price, ~$99 for a pair... :)

http://i48.tinypic.com/2z4a551.png
01-10-2010, 06:27 PM
ah_khoo

1700 done w/ rather high volt... :shakes:

http://i49.tinypic.com/2vwh214.png
01-10-2010, 07:02 PM
Daveburt714

Quote:

Originally Posted by ah_khoo

my attempt on crucial value ddr3 1333 cas 9, volt is a 'lil bit high imo but not bad consider d price, ~$99 for a pair... :)

Is this the same memory I'm running ah_khoo?

See this post: http://www.xtremesystems.org/forums/...&postcount=349

I'm just curious, because you say your running High Voltage while it looks like its set @ 1.25v, and my subtimings are a little better than yours...

BTW: I've gotten mine stable @ 1600 7-7-7-18-24 @ 1.70v.

I'm probably missing something here as far as kits go, but Crucial always seems to offer some nice bargain ram... :up:
01-10-2010, 07:09 PM
charged3800z24

Dave, the 1.28v is the HT and 1.86v is DDR. :p:
01-10-2010, 07:20 PM
ah_khoo

Quote:

Originally Posted by Daveburt714

Is this the same memory I'm running ah_khoo?

See this post: http://www.xtremesystems.org/forums/...&postcount=349

I'm just curious, because you say your running High Voltage while it looks like its set @ 1.25v, and my subtimings are a little better than yours...

BTW: I've gotten mine stable @ 1600 7-7-7-18-24 @ 1.70v.

I'm probably missing something here as far as kits go, but Crucial always seems to offer some nice bargain ram... :up:

sir, u miss looked the voltage values as charged3800z24 pointed out, vdimm is @ 1.86v, slightly high for 24/7 setup imo. mine doesn't come in pair, they were purchased as single stick. :)

Quote:

Originally Posted by charged3800z24

Dave, the 1.28v is the HT and 1.86v is DDR. :p:

spot on... :D
01-10-2010, 07:46 PM
Daveburt714

Quote:

Originally Posted by ah_khoo

sir, u miss looked the voltage values as charged3800z24 pointed out, vdimm is @ 1.86v, slightly high for 24/7 setup imo. mine doesn't come in pair, they were purchased as single stick. :)
spot on... :D

I see it now man... Yeah, 1.86v seems pretty high. ;)

I bought mine as a kit, but it looks like the same gear. 1333 CL9 @ 1.5v stock...
Mine is running @ 800 7-7-7-18-24 with 1.70v.

Maybe we can both take a little knowledge away from this. :up:

I may be able to crank the frequency (with volts) and you may be able to tighten sub timings... :yepp:

All in all it's still nice stuff for the price!
01-10-2010, 08:07 PM
ah_khoo

Quote:

Originally Posted by Daveburt714

I see it now man... Yeah, 1.86v seems pretty high. ;)

I bought mine as a kit, but it looks like the same gear. 1333 CL9 @ 1.5v stock...
Mine is running @ 800 7-7-7-18-24 with 1.70v.

Maybe we can both take a little knowledge away from this. :up:

I may be able to crank the frequency (with volts) and you may be able to tighten sub timings... :yepp:

All in all it's still nice stuff for the price!

sure, but i know very 'lil in ram timing, especially those alphatiming which make me :shrug:...

the thing i noticed bout these sticks is they're quite voltage hunger @ high freq (not so high if compared to performance ram), for a mere 10+Mhz increase, i need to bump vdimm a notch. i will stop @ 1.9v and see how high can it fetch. :)

voltage & mileage wise could be down to how well is d imc of chip i think. d b50 i'm usin now is kinda weak in imc & overclockability, i can't get 3.6GHz prime stable unless i pump > 1.4v. NB Frequency too max out @ 2400MHz w/ 1.3xV... :(

ur runnin on c3 chip which have superior imc, i'm sure u'll do alot better... :up:

yup, gotta agree d item is good for its price... ;)
01-12-2010, 07:37 AM
over@locker886

Quote:

Originally Posted by chew*

I think it makes more of a diff with TRP than anything and being able to run that tight.

Buying 1866 kit gives you more flexibility to as you can bin the 3 sticks for the 2 with the tightest TRP.

Here's 1866 TR1's on asus which I highly reccomend not sourcing as they eventually can and will go bad. This is a tad more than suicide/1m stability ;)

http://chew.ln2cooling.com/qdig-file...%203525mhz.jpg

Very nice chew! What voltage you used?
01-12-2010, 06:53 PM
chew*

I think that was like 1.72-1.76 on asus.
01-13-2010, 02:58 AM
Afterburner

I still stand by my CSX Diablo D9GTR @ 6-6-6-18-12-90ns @ 1600mhz :D

http://img.photobucket.com/albums/v372/Reheat/csx.jpg
01-13-2010, 03:05 AM
Zeus

I bet you have to pump at least 2.2V into them for that, no?
01-13-2010, 03:10 AM
Afterburner

If I recall, they did fine @ 2.1v but I have them @ 2.2v for more overhead under load conditions etc... :yepp:
01-13-2010, 03:12 AM
chew*

Quote:

Originally Posted by Afterburner

I still stand by my CSX Diablo D9GTR @ 6-6-6-18-12-90ns @ 1600mhz :D

http://img.photobucket.com/albums/v372/Reheat/csx.jpg

Really now?

http://chew.ln2cooling.com/Ram%20clo...20c5%2032m.JPG

http://chew.ln2cooling.com/qdig-file...%2032m%201.JPG
01-13-2010, 03:19 AM
Afterburner

I bow in the presence of the mighty one for I'm just a measely gamer.... :worship:

At USD$150 a pop, they are hella cheap compared to what I get back home plus CSX dont exist here.... :yepp: :D
01-13-2010, 03:20 AM
chew*

Quote:

Originally Posted by Afterburner

I bow in the presence of the mighty one for I'm just a measely gamer.... :D

At USD$150 a pop, they are hella cheap compared to what I get back home plus CSX dont exist here.... :yepp:

cas 5 stuff is $134 for 3x1g. 2 sets bin for best 4, sell off a set. About same price, less volts, less heat, win win.

Kingston is preety widely avalable in singapore isn't it? Not really sure but when in taiwan i saw quite a bit of it.

Out of curisonity where in the heck did you find diablo GTR 2x2g for $150 a pop in USA?
01-13-2010, 03:35 AM
Afterburner

Quote:

Originally Posted by chew*

cas 5 stuff is $134 for 3x1g. 2 sets bin for best 4, sell off a set. About same price, less volts, less heat, win win.

Kingston is preety widely avalable in singapore isn't it? Not really sure but when in taiwan i saw quite a bit of it.

Out of curisonity where in the heck did you find diablo GTR 2x2g for $150 a pop in USA?

Ahh, this was sometime back though. Yes Kingston is widely available here. I got mine from Tankguys. I had the concierge of my forwarder order it for me as they refused to accept international cards. I was inspired by your gospel that AMD needs a minimum of cas6 @ 1600 to reap the benefits.... :D
01-13-2010, 03:55 AM
chew*

Quote:

Originally Posted by Afterburner

Ahh, this was sometime back though. Yes Kingston is widely available here. I got mine from Tankguys. I had the concierge of my forwarder order it for me as they refused to accept international cards. I was inspired by your gospel that AMD needs a minimum of cas6 @ 1600 to reap the benefits.... :D

heh well cas 6 still better than cas 5, after about 3600/2600 cas 5 scaling dies :( Need more speed at that point, 1600 isn't enough

Yep I just went searching again and tank guys has them listed but no stock for $149. :(

I just want another set to add to my rather large collection, 2x2g gtr is missing.
01-13-2010, 04:18 AM
Afterburner

I'm sure they will have them restocked.... :up:
01-13-2010, 04:22 AM
Barr3l Rid3r

Quote:

Originally Posted by chew*

heh well cas 6 still better than cas 5, after about 3600/2600 cas 5 scaling dies :( Need more speed at that point, 1600 isn't enough

Yep I just went searching again and tank guys has them listed but no stock for $149. :(

I just want another set to add to my rather large collection, 2x2g gtr is missing.

what voltage were you using in the last couple of pictures?

All corsair GTR uses Hypers?
01-13-2010, 04:39 AM
chew*

Quote:

Originally Posted by Barr3l Rid3r

what voltage were you using in the last couple of pictures?

All corsair GTR uses Hypers?

somewhere around 1.72 to 1.74

Nope not all of them, certain models. Those were GTX.
01-14-2010, 01:23 PM
hololoy112

hey guys are these sticks good.
its the only dominator gt's i can find currently.

http://www.vatanbilgisayar.com/corsa...spx?I_ID=40218

Show 100 post(s) from this thread on one page