I think I forgot to post a screenie of the sticks running 1000Mhz, 4-4-4-15, 1.94V.
Here it is then :
http://www.abload.de/img/oczblade_pc8500lv_1000rsnf.jpg
Printable View
I think I forgot to post a screenie of the sticks running 1000Mhz, 4-4-4-15, 1.94V.
Here it is then :
http://www.abload.de/img/oczblade_pc8500lv_1000rsnf.jpg
Can you run everest and give us a look at the bandwidth?Quote:
Originally Posted by Jupiler
I'm worried about lower bandwidth given that Perfromace Level (tRD) is set at 9.
Can you lower it to 8?
Newegg must have OCZ binning - my ddr2 1150's can't hit 1200...
Is that the Blade 1150?Quote:
Originally Posted by LagunaX
i'm not surprisedQuote:
Originally Posted by LagunaX
ocz been binnin verry tight
i wont be buyin no blades
ty ocz for not sendin any to canada
gl to whom will buy em
i got me some drr3 instead:yepp:
was ridiculous to pay ddr3 prices for ddr2 anyways
Not even 1200s if you could find them? They were never that expensive.Quote:
Originally Posted by zsamz_
Lame. This is why no DDR2 IC will ever be better than Micron RevD.Quote:
Originally Posted by zsamz_
i was ready to pay 120$ for a set :rofl: but only 8500 plats could be found and for 105$Quote:
Originally Posted by Faiakes
got me a 4 gig set of ddr3 1800mhz for 50$:D
n i got my 4 gig set runnin 5-5-5-15-55 1300mhz
:yepp: tight binin is lame to squeeze every $ from consumerQuote:
Originally Posted by Shiranui Gen-An
crucial coulda binned alot of d9 @pc2-9600:yepp:
Well, you have (or changed to) a DDR3 mobo?Quote:
Originally Posted by zsamz_
i've had a ddr3 mobo since 2007 it was boxed for a long time i was averaging an rma every 5 weeks lol pos gigabut p35Quote:
Originally Posted by Faiakes
but prices were just too insane to buy any lol
if a pos gigabyte p35 can do 1300 stable makes me wonder what a good board can do lol
but even @ 1300 can 5 it barely breaks 10k in everest
and 1300 cas 5 is better than 1600 cas 8
ddr3 has no big advantage on ddr2 as i see it unless you runnin tripple channel or 1800+
but buyin a set of blade is a waste of $ it might be as expendible as d9
i can use this set of 1800mhz when i go i5;)
Have you tried Gigabytes EP45-UD3P motherboard yet?Quote:
Originally Posted by zsamz_
One of the best if not the best lga 775 motherboard out there for overclocking quads and achieving insane memory speeds.
are you serious :rofl: maybe if it was free i would not spend 1$ on another gigabut boardQuote:
Originally Posted by LiquidReactor
to me its still a gigabut i went throught rma hell in 2007 averaging 1 board every 5 weeks i finally boxed the board i woulda sold it but i didnt feel it was right for another person to own a gigabyte p35:rofl:
and yes i have tried the board its verry n00b freindly memory bandwidth suks bad
if my p35c were to die again i would not waste 15$ to rma it :yepp:
did you ever try a dfi? then you would know what a real board can do
So you had 5 motherboards in a row go bad on you and you didn't bother checking whether it was the wiring in the house or your power supply or maybe some other external factor? Five different mobos to all go bad in someones hands in a week isn't the motherboards makes fault b/c QC cant be that bad and they all died in your location implying something else was the culprit.Quote:
Originally Posted by zsamz_
Anyways fanboy much and can your DFI do what my Gigabut can do?
i have a seperate line installed just for my computers;)Quote:
Originally Posted by LiquidReactor
besides the boards i had 5 sets of ram die on em:rofl:
1 board died @ stock:rofl:
since i had stopped usin gigabut boards i havent had a component die for almost 2 years
btw i have 6 pcs running not just the 1;) i cant list all my parts or a mod would ask me to downsize it again
loosen up a boards settings and it can do anything lol but who wants a slow board:rofl:
I have actually found 4gb PC2-9600 Blade but, like you said, I'm not paying $154 for RAM I'll be using for less than a year.
My PC2-8000 Cellshock hits 1200 at 5-5-5-10-25 and, wait for it, tRD 8!
smart moveQuote:
Originally Posted by Faiakes
price is ridiculous
woulda been incredible if we was in 2007:rofl:
ocz gonna build a time machine next:ROTF:
Actually tested my 1150 ram at 1150 5-5-5-18 1.9v - no boot!
Even with the lowest multiplier no go.
Did run 5-5-5-12 1000 1.87v - but a lot of older 2 x 2gb 1066 modules would do that too such as my patriot vipers.
OCZ RMA - very disappointing for my first set of OCZ ram (new too at that)!
i heard they reengineering them maybe bs lol cause thats what excuse they gave to canadian retailorsQuote:
Originally Posted by LagunaX
maybe ryder will respond lol
Sold my 8500 LV Blades. Waiting for the Egg to get 9600s.
n7 the 8500s are available in canada
i wont be needin no more ddr2 i just ordered a rampage extreme
Does this mean you'll be blowing out all your DDR2 at unbelievable savings???Quote:
Originally Posted by zsamz_
canadians will get dibs;)Quote:
Originally Posted by 18 is # 1
since would be much cheaper to ship
Prejudicial moose lover....Quote:
Originally Posted by zsamz_
That DDR3 ain't gonna keep your house warm in the winter.
my house verry warm with over 40 gigs of ram :rofl:Quote:
Originally Posted by 18 is # 1
ddrr is only nice 1600+ or 1350 cas5
i did test my set they do 1350 cas 5 but will do better once the rampage extreme comes
@ 200can$ was time to move on
the money i saved not buyin the blades i put in the RE;)
shipping a set of ram in canada costs 7-10$ to the us its 12-30$;)
APOLOGIES TO OCZ!
I switched motherboards from my Foxconn Mars to my Asus P5K.
Didn't think it would make a difference as both are great p35 boards.
Wrong!
Would not do 6:5 1137.6 with 9.5 x 474 e8500 5-5-5-18 1.9v.
On P5K does 4:3 1173 with 10 x 440 e8600 5-5-5-12 1.9v stable 1 hr OCCT , currently 1.8v testing...
Don't know if it will hit 1200 but for my 4.4ghz e8600 p5k rig, 1173 5-5-5-12 is enuf...
Edit: Stable 1 hr 5-5-5-12 1.8v 1173...