Printable View
I explained you how to do it with previous bios: you should set the cpu ratio control in auto speed step enable turbo enable and c1e disable....don't care about the firts bios post; go to windows and open cpu z and you will see that the cpu multiplier is always set to 21x as I show you....:)Quote:
Originally Posted by highoctane
Apparently you need the 1303 BIOS, not the 1206.Quote:
Originally Posted by highoctane
Ok, I just updated to the 1303 BIOS and I can also confirm, it allows you to directly key in the 21x multiplier with the i7 920! I am using that setting now!
EDIT:
Aww... while you can use the 21x multiplier now, it's functionality is the same as Turbo mode, it drops back to 20.5 and 20x under very heavy loads for a while.
I confirm that it makes the 23 multi available full time with the 940 chip! Booted briefly at 4.5GHz!
Only thing is does me no good. My memory can't run fast enough.
I did find out though that my Corsair dominators will run at 1700, but only at 1.6V and not at 1.64V!
New bios for ASUS P6T DELUXE V2 - 0302:
P6T-ASUS-DELUXE-V2-0302
What i am wondering is if someone knows how to fix this problem:
http://i125.photobucket.com/albums/p.../MemoryWTF.jpg
You see how cpu-z shows 6gb, which is what i have, but windows AND BIOS both report 4gb.
And NO i dont have any BENT cpu pins. Ive checked, and double checked, and even took a dayam maginifing glass to triple check.
Somehow and somewhere i lost 2gb. And yes ive checked my RAM, there good.
Oh and this problem is not just mine, my friend Shazza has this problem, as does 1 other person who posted in this thread.
Quote:
Originally Posted by Mypejon
See here's another.
Oh and heres another, its not just the P6T-Deluxe im seeing that has this issue. But all of them including the R2E.
CPU Throttles due too much heat ?Quote:
Originally Posted by 003
I think its just this TDP or current limit which is disabled on e.g. GB UD5.
It's not a big problem 0.2v more on the dram bus voltage.....then you have also to consider the vdrop so the volts you give at the memory are close to 1.65 in real....don't care about the bios warnings :)Quote:
Originally Posted by tomb18
hey , ppl ... :confused:
check P6T deluxe FTP directory on ASUS ftp ( ftp://ftp.asus.com.tw/pub/asus/mb/LGA1366/P6T_Deluxe/ )
am am omg em hmmm i saw something strange there ...
something like this :
http://img91.imageshack.us/img91/6084/12132.th.jpg
:shocked: :confused: :shrug:
i tried to download this files but couldn't open them
i wouldnt be suprised if the dlx went though another revsion.
as i said my memory problem is very common.
A lot of you guys should check in windows to see if your really gettting what you installed.
My honest advice those of you that are looking to get this board... STAY AWAY FROM IT.
Its trash compared to the eVGA and Giggy.
YES!! 21x Multi does work in 1303
I will load it when there will be on the site.....I think those are the only one can do it.....asus are fantasticQuote:
Originally Posted by buddatech
I'm priming 191x21 as I type this hopefully all goes well I will post some results..... I was stable @3.8 on my new 920 batch 3836A925 with only 1.24v 36c idle but for 191x21 I need 1.35v and idle is at 41-42c
Mine took a week to get it due to stock, arrived last week thursday posted it back to the supplier yesterday as it was a DOA...
Don't like waiting :(
It happends also with my intel core i7.....with the multiplayer 21x it needs more vcore :)Quote:
Originally Posted by buddatech
3835
nothing worse than getting something brand new and it's DOA...... the waiting is sooooo painfulQuote:
Originally Posted by generious
I agree with you.....:)Quote:
Originally Posted by buddatech
No,see below quote. I have SpeedStep, C1E and CPU TM Function disabled.Quote:
Originally Posted by Leeghoofd
Correct. And it is a big problem because the 20x multiplier is way less stable than the 21x. So when I am priming along at 200x21 fully stable, and then eventually it drops to the 20x multiplier, BSOD follows shortly afterward :(Quote:
Originally Posted by ic3m4n2005
I have e-mailed this issue to my higher up contact at Asus. They never respond to me, but I believe they are listening to what I say, because I had also e-mailed them about the lack of 21x and 23x multiplier, and poof! We now have the 1303 BIOS! :)
a small overclock with the multiplayer at 21x
how is the result?
http://www.pctunerup.com/up/results/...1_Cattura4.JPG
Pretty cool, what HSF are you using and what batch#? I can't seem to get stable 191x21 BSOD 15-20 min in but 200*19 1.24v all day :(
ovviusly I don't know if I am stable or not :asd:Quote:
Originally Posted by buddatech
my 3835A726.....I have to try it also with ln2 and see what I can do....now I am on h2o and at 4200ghz with the same vcore I could'not enter windows beacouse of a blue screen.....I will try again when I will have time :)
I have the Asus P6T Deluxe non Palm addition and would like some help in ocing please. I have updated to the 1303 bios and I'm running these components Core I7 920 cpu with a Notcua NH-u12p cooler and this memory ( http://www.newegg.com/Product/Produc...82E16820231225 ). I 've set my AI to the XMP profile and set my multiplier to 21 everything else is on auto. When I raise my Bclk to anything past 150 it will not boot. My memory voltage is set to 1.50. I see that alot of people are achieving good oc's with this board . Am I doing something wrong or perhaps missing some settings. If someone has a OC template for this board and cpu could you please help me out? Thanks for your help and time , I appreciate it very much.
ai tweaker manual cpu ratio 21x vcore 1.25 pll 1.8 ich 1.1 ioh 1.1 dram bus voltage 1.66 then try 150x21 :) after you test with linx for 20 cicle, if you are stable you can increase the bclk :)Quote:
Originally Posted by colt1911
Thanks for the info and help. I'll give it a go.