Foxconn BlackOPS (Retail version)

Printable View

Show 100 post(s) from this thread on one page

06-19-2008, 04:05 AM
Matias23

Yoyotech told me that Dreadnought will be in stock end of next week
06-19-2008, 07:21 AM
Xello

Quote:

Originally Posted by Matias23

Yoyotech told me that Dreadnought will be in stock end of next week

Any word on the reason it's taken this long to be released?

With any luck, it's because they've been working 24/7 to create a stable board+bios - could be the one to get for all the people that couldn't get the SIIE/reference boards going.
06-20-2008, 12:39 AM
jolliffee

Quote:

Originally Posted by jolliffee

Anyone give me advice please?

I've two of everthing so have been able to do some intial tests, everything is new and just been fired up:-

I have a problem with 1 of the Blackop boards, with the QX6770 in it at stock settings running prime 95 & Everest; 2 of the cores cause prime 95 to fail after arround 30 seconds or so, with Everest failing after 30 seconds and some times runs a litttle longer but then the same cores fail. Temprature is fine. I'm sure this is mobo problem coz the same bits work fine in the other Blackops mobo.

Am I missing some settings to get the mobo stable before oclocking or do you recon this is a duff mobo?
Thanks

To answer my own question, it is the board!:shrug:
06-24-2008, 05:42 AM
3BABY

Hey Yall,

just a few questions bout this board.. Sham, SF3D... Others .. what kinda Quad Core FSB can be expected out of this board >450 ? i see Kensek with a good 485.. how are we looking here Guys.. what are your experiences? with all due respect to CPU dependancy.
06-24-2008, 05:44 AM
systemviper

Quote:

Originally Posted by Matias23

Yoyotech told me that Dreadnought will be in stock end of next week

Finally! :clap:
06-24-2008, 06:57 AM
LardArse

Quote:

Originally Posted by 3BABY

Hey Yall,

just a few questions bout this board.. Sham, SF3D... Others .. what kinda Quad Core FSB can be expected out of this board >450 ? i see Kensek with a good 485.. how are we looking here Guys.. what are your experiences? with all due respect to CPU dependancy.

I used to be able to do 480fsb, then newer bioses 460+ then with p1 p2 option enabled 430+440+

*** opps you mean dread or black, was talkin about dread....
06-24-2008, 07:00 AM
saveus222

:banana::banana::banana::banana:.. what a mobo.. you gotta be kidding me.. :) lol...
06-24-2008, 07:15 AM
3BABY

Quote:

Originally Posted by LardArse

I used to be able to do 480fsb, then newer bioses 460+ then with p1 p2 option enabled 430+440+

*** opps you mean dread or black, was talkin about dread....

LOL Sham.. talking bout black.. i have no probs with 790i and fsb :D
06-24-2008, 07:17 AM
Praz

Quote:

Originally Posted by saveus222

:banana::banana::banana::banana:.. what a mobo.. you gotta be kidding me.. :) lol...

Why don't you show some respect. Should be happy that Shamino posted an honest answer. If you knew anything about BIOS tuning you would know that performance levels change, sometimes dramatically. However that does not mean it will be the final outcome.
06-24-2008, 07:19 AM
LardArse

Quote:

Originally Posted by 3BABY

LOL Sham.. talking bout black.. i have no probs with 790i and fsb :D

460 for black for quad for me currently....
06-24-2008, 07:27 AM
Gautam

1 Attachment(s)

Quote:

Originally Posted by 3BABY

LOL Sham.. talking bout black.. i have no probs with 790i and fsb :D

I had about 465-470 for 3D stability, CF enabled and all. (it was chip bound, did about the same or lower on other boards)
06-24-2008, 07:43 AM
3BABY

Cool thanks Gautam and Sham for the quick replys.. its starting to seem to me that above 460-470 is about where it stops on the x38/x48 chipsets. yeah the odd CPU+Chipset will get like 480+ but im just wandering why its ALOT harder to get these high FSB's with this chipset when 490-500 seemed (with a little work) achievable on earlier chipsets namely P35. is it the Skew rates, Pl settings, straps, internal timings etc etc something weve just kinda come to see that all revolve around a good bios and a Labyrinth off trying setting to get these clocks. .. its doing my head in :confused: im just tryna figure out where it really stops.. and where to be happy at.. and in the last few weeks its become very evident that a good BIOS is 70% of the issue.

BTW great board Sham and Co... keep those BIOS's coming :D
07-03-2008, 08:34 AM
dMITIj

what size are thread on the barbs for the black ops? 1/4 or 3/8 or? cause ill get my Blac Ops on monday but need some other barbs to fit whit my WC.
07-03-2008, 11:15 AM
Telo

Quote:

Originally Posted by dMITIj

what size are thread on the barbs for the black ops? 1/4 or 3/8 or? cause ill get my Blac Ops on monday but need some other barbs to fit whit my WC.

3/8 and 1/2 m8.
07-03-2008, 12:15 PM
dMITIj

Quote:

Originally Posted by Telo

3/8 and 1/2 m8.

thx m8.

but i would like to know if it is 3/8" BSPP ore 1/4" BSPT to 3/8" 1/2 hose, if you know what i mean? :)
07-03-2008, 12:33 PM
splmann

I also did some small Tests again with the G27 Bios and a single GTX280 !

http://www.abload.de/thumb/aquamark3207462rb.jpg

http://www.abload.de/thumb/aquamarksettingsi4i.jpg

Regards

splmann
07-03-2008, 01:00 PM
Telo

Quote:

Originally Posted by dMITIj

thx m8.

but i would like to know if it is 3/8" BSPP ore 1/4" BSPT to 3/8" 1/2 hose, if you know what i mean? :)

I gather you refer to the threading and the fitting, correct? The threading is 1/4", the fittings are 1/2" and 3/8".
07-03-2008, 11:33 PM
dMITIj

Quote:

Originally Posted by Telo

I gather you refer to the threading and the fitting, correct? The threading is 1/4", the fittings are 1/2" and 3/8".

Yes!! thx m8 :up:
07-08-2008, 01:28 AM
Lu(ky

Hey guys I think I just lost more board? I think the controller went out? I was trying some OC runs, and after Windows Vista Home Prem x32 restarted. It went thru the normal screens and beeps and went thru the scrolling from left to right (green) windows loading thing. But when it gets to the last WINDOWS LOGO with sounds where windows will load it just resets again.(controller reseting) I tried everything, from cmos resets, battery taken out, power supply unplugged, different BIOSes P04 and G26 and nothing. I still see my RAID -0- in start. I just here it click and it resets and starts over no matter what I do? So I am thinking it is toast and in need of a RMA? Any ideas??
Thanks
07-17-2008, 11:51 AM
merlot_14

good looking board
07-17-2008, 02:04 PM
zbogorgon

QX9770 C1 and Blackops no boot, debuger cycles ...99-90 reset...
QX9770 works fine on different mobo and Blackops works (sort of, it boots) with E8600, any ideas ?
07-17-2008, 09:14 PM
bazx

Quote:

Originally Posted by zbogorgon

QX9770 C1 and Blackops no boot, debuger cycles ...99-90 reset...
QX9770 works fine on different mobo and Blackops works (sort of, it boots) with E8600, any ideas ?

i have the very same problem
07-17-2008, 09:46 PM
zbogorgon

Quote:

Originally Posted by bazx

i have the very same problem

FFS!
07-18-2008, 11:37 AM
SmokeyTheBandit

Just bought me an Blackops but board will simply not boot at all.
Press power -> gives FF and then after 3 seconds it will shutdown and it will start all over again.

Does the same with different memory or even NO memory at all :mad:....
I also use an QX9770 C1 but as is said i don't see anything other than FF on the hex ....
07-18-2008, 12:18 PM
zbogorgon

Quote:

Originally Posted by SmokeyTheBandit

Just bought me an Blackops but board will simply not boot at all.
Press power -> gives FF and then after 3 seconds it will shutdown and it will start all over again.

Does the same with different memory or even NO memory at all :mad:....
I also use an QX9770 C1 but as is said i don't see anything other than FF on the hex ....

prob the same thing, I thought I saw everythig, but this puts a new spin on how f**** you can get, by buying "the best board"

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 05:44 AM.

XtremeSystems