Don't feel jipped, I can only do stock below 1.3V. I have messed with 2.6-2.75 but nothing would be absolutely stable.Quote:
Originally Posted by d4d4cH
Don't feel jipped, I can only do stock below 1.3V. I have messed with 2.6-2.75 but nothing would be absolutely stable.Quote:
Originally Posted by d4d4cH
Thats like saying all of the 939 Opterons should have hit 3ghz:rolleyes:Quote:
Originally Posted by dng
For Example I spent $570.00 on y Opteron 175 and it would only do 270mhz from the initial 2.2ghz:yepp: so I spent $170.00 on a Opteron 170 and it did 3ghz from the stock 2.0ghz so go figure:shrug:
I read somewhere (some manual... sorry can't remember),Quote:
Originally Posted by DualCore
that if you use 4 sticks you need to increase some of the timings in order for them to work. The board does it by default.
You will be able to get lower latency with 2x2...
I would Recommend the OCZ HTC Reaper 1066 2x2gb kit and or one of the kits hat you can use OCZ Tony's Modified SPD File on:up:
Windowpane of course:DQuote:
Originally Posted by stocius
I remember when we came up with those a long time ago. 3/4 of lab was spent debating which colour variation went with which drug. That was the most intense lab ever. Much more fun than figuring out if butterfly poop would actually destroy the world.Quote:
Originally Posted by Brother Esau
Quote:
Originally Posted by dng
which pin settings do you mean? you plug in those 2 cards, connect them via the cf-connector and then install driver or reinstall it if its been installed before.
then cf-tab should be available and you set set cf to work.
test with 3dmark06, should give you lot > 14k points with three gpu setup.
only thing you might set is pcie 2.0 to autonomous switch in pcie settings menu in the bios. but even without cf should work..
lol :rofl:Quote:
Originally Posted by stocius
you "must" install Both Crossfire Bridges or You're Scores Will Suffer And Be Substantially Less!!!!!!!
thank you all for the help in my crossfire question. i was referring to the pins layout between the 2nd and 3rd pcie slots on the board. i read that those pins are for the 3rd pcie slot. i will try the pcie autonomous setting in the bios. i had the bridge install and everything. one thing that was strange was after i install the latest driver 8.5, ccc didn't come up. i can launch it manually, but it would just sit there. i'll fiddle around with it more tonight. i'm running windows server 2k8, but that shouldn't matter as it's like vista with sp1. i'd love to get crossfire working as i just bought a new corsair tx 750w. thanks again everyone for your help.
i had 2 different opty's hit 3.0ghz, a 165 and a 144. guess i got luckyQuote:
Originally Posted by Brother Esau
ahh i see you mean those power connectors. i'd connect them to a floppy style connector each.Quote:
Originally Posted by dng
with ccc is a common problem now and then. one time, i had to reinstall whole windows after too many driver install and deinstall..
oh i don't mean the floppy type power connectors. i have those two connected. i mean the jumper type pins for the pcie settings. according to the manual, it's like 2x4x something and you're supposed to place the blue plastic jumpers according to the pins layout. i have it at default when the mobo was shipped.
not true, i tried it with just 1 bridge out of curiosity and got the same general score in 3dmark06Quote:
Originally Posted by Brother Esau
should be right as it is right now..
i think this can be entered in bios as well or am I wrong??
i'm looking into my manual mom..
mmh found that jumper on the mobo but not in the manual...
i have set it to the left...
yeah...thats somewhat crazy...how do they manage to produce chips that are just good enoughQuote:
Originally Posted by AlabamaCajun
Quote:
Originally Posted by stocius
:yepp::yepp::yepp::yepp:
http://i259.photobucket.com/albums/h...t/roflsigh.gifhttp://a475.ac-images.myspacecdn.com...dc849f0d3a.gifhttp://a475.ac-images.myspacecdn.com...dc849f0d3a.gifhttp://a475.ac-images.myspacecdn.com...dc849f0d3a.gifhttp://a475.ac-images.myspacecdn.com...dc849f0d3a.gifhttp://a475.ac-images.myspacecdn.com...dc849f0d3a.gifhttp://a475.ac-images.myspacecdn.com...dc849f0d3a.gifhttp://i164.photobucket.com/albums/u...nydead/bus.jpghttp://i39.photobucket.com/albums/e1...805f546100.jpghttp://i200.photobucket.com/albums/a...d627/syf-1.gifhttp://i95.photobucket.com/albums/l1...retheewell.gifhttp://i200.photobucket.com/albums/a...7/unclesam.gifhttp://i65.photobucket.com/albums/h2...atefulDead.jpghttp://i177.photobucket.com/albums/w...ack4-1moon.gifhttp://i166.photobucket.com/albums/u...50/turtles.gifhttp://lc.fdots.com/cc/lc/fb/fbfe39a...411acfd8e6.gifhttp://i200.photobucket.com/albums/a...d627/syf-1.gifhttp://i208.photobucket.com/albums/b...dancetr9-1.gifhttp://i74.photobucket.com/albums/i2...atefuldead.gifhttp://b9.ac-images.myspacecdn.com/0...65785049_s.gif
Are you a Greatful Dead fan by any chance? lol. Good stuff!Quote:
Originally Posted by Brother Esau
Who's this Grateful Dead you Speak of??????:DQuote:
Originally Posted by stocius
:banana::banana::banana::banana:, this beta browser based spellcheck corrected my post. I meant Greatful Dead. The Grateful Dead is a polka band from Sheboygan, Wisconsin.Quote:
Originally Posted by Brother Esau
Quote:
Originally Posted by stocius
SILLY RABBIT:p: It Really is GRATEFUL DEAD
That would explain the correction, maybe the spellcheck actually works. Ahh well I've seen it both ways. We used to have arguments, we were so out of it we couldn't read :shrug:Quote:
Originally Posted by Brother Esau
Had me worried there stocius, though you might have been running Internet Exploder. Firefox noobs IE.
BOT
Checked BIOS, I am on 5-5-08 and it's starting to look good stock. I've not OCed yet but will get to that later.
Did a little tweak. Raised my HT to 1200 then 1400. I noticed that running games the stutter is less. I don't see an speed increase but it is smoother.
Next I got my Corsairs in running 4-5-4-13 at 2.05V, that just made it even better.
I'm starting to get into this. Now If I can raise the clocks a little I'll definitely be content with this until the new stuff comes.
Now, I need to go dig up some GD :D
Hows it going with VISTA 64 ALABAMA? Can you run the CPU Below 1.30v?
I aborted that project when the 5600 behaved terribly in the DFI. I have the Phenom back in and Love it. I still have to check overclocking.