Printable View
me too.....thanks my friend :DQuote:
Originally posted by TheDude
Good to see you benching again! :D
:toast:
i did a little looking today on the orb.and if i can get the bugs worked out and get this one published.it will be the # 1 AMD r9700 score....i was suprised to see it did that well.unless i am looking at it wrong.
http://www.xtremesystems.org/forums/...&postid=214980
nice scores ^^
think my fx 5800 could catch up with you (but seriously i dont knnow), at least it does in the ntaure test (153fps @ 570/1140)
well i did it.put the amd xp1700 at the #1 spot for a AMD and R9700....got it to publish at 22312.....got to try and go now for 3dmark03
edit...forgot to say...r9700 is running @ 510core....woohoo...i believe that is one of the fastest r9700 core speeds ever
also i make 3 more capillary tube adjustsment to the triple evap,bench rig.
went to adding tubing until i saw the temp start going up(showing the evaperator was starving for refrigerant)then i shorted up slightly...it is very time consuming,but i know now the minimum cap tube that can be used on a r9700 @1.93v which is alot of heat.and what the cap tube is for a xp1700 @ 2.1v...
got the rig running CPU @ full load -40c and the GPU @ -42c running 3d2001 full steam.
Hot Damn!!! Cooking Now! :up:Quote:
got the rig running CPU @ full load -40c and the GPU @ -42c running 3d2001 full steam.
Great work bro :toast:
just hit 6860 3dmark03 first run...number 1 amd r9700 score...woo hoo:D
Kick some ass Bro!....I'm having almost as much fun as you are, just watching! lol :D
:thumbsup: Great One!! :toast:
thanks guys,,but thats it for me today,got yard work and kidds so,,,,Quote:
Originally posted by Hobocrow
:thumbsup: Great One!! :toast:
maybe tonight i will continue the benching while i work on a few prommies:D
Makes me wanta pee-pee my pants!
Frost Miester is the man!
I don't even know what it means, but I'm excited, too... LOL
Actually, I know what #1 means. Great job, Bowman. You are the man. :D
bowman, why dont you try some intel stuff?
you'd be getting 24.5k+ I would bet
well i have the intell setting here now burning in.....o yea...Quote:
Originally posted by Amoeba Assassin
bowman, why dont you try some intel stuff?
you'd be getting 24.5k+ I would bet
i wanted to leave with AMD on the top for a while anyways...
i just took 1st in the 9700 pro over a intel and i am only 4 points behind a intel in the 3d2001 scores,it will be mine before the week is over....check out the new sig scores....:D
Wow....benching that 1700 at 2964! :eek:
yea running smooth.but the board is holding me back.i have pushed it to the edge.....HA HA HA..if i add .1v to the cpu it locks,add .1 to the ram it locks.....i have maxed the amps that can be pulled through.i can run past 3g at lower fsb and higher mulitpler but not with the scores i have.the twinmoss is killer....228 running 2 2 2 11 now thats tight.i have adata pc4000 and hyperx pc4000 that wont run close to this ram.Quote:
Originally posted by TheDude
Wow....benching that 1700 at 2964! :eek:
side note i am moding 2 prometias right now.have slightly improved the process some.but i am waiting on a fan for a new mach ii......i will be testing them monday night i hope
hey bowman...cant wait to see what you can do with the amd64...already getting 24000 + in 2k1!!
well is't late..but i did it...R9700 top spot in both 3dmark03 and 3d2001se:D finially....
http://www.xtremesystems.org/forums/...&postid=216777 http://www.xtremesystems.org/forums/...&postid=216843
Great job. Now time for the Intel setup.
What kind of temps are you getting from the cpu block???
baker18
Give credit where credit is due! You da man Bowman, Congrats! :toast:
well thats what the new blocks are for....Quote:
Originally posted by baker18
Great job. Now time for the Intel setup.
What kind of temps are you getting from the cpu block???
baker18
the cpu is not doing bad.running -40c and the gpu is -42c until the room heats up to close to 90f (33c ) then they drop to -37c and -39c....but still thats pretty good with the heat.
Fantastic job Bowman!!!!!
I look forward to my "Bowman modded Mach 1" Keep up the good work...
Phasor "The Old Fisherman"
i know i havent posted in a couple of days,work is crazy with meeting and stuff,so i havent even sat down in my little room to work until at least 10:00 pm at night.i should get back to speed in a day or 2.
i have 3 prommies,2 have to go soon..so i will be posting a couple new pics soon.as i have changed my drier mounting.
Hey Bowman, Where can I get a bristol compressor like the one that you have running the three evaps?
Not to disillusion anyone, but of all the compressor brands out there, Bristol has the worst reputation.
Whatsmore, I don't know of anyone who makes a compressor specifically for very low temps or cascades. These systems use regular everyday low temp compressors.