32m SPi Low Clock Challenge

Printable View

Show 100 post(s) from this thread on one page

11-30-2008, 06:15 AM
dinos22

just benching the 920 chip at 4.6GHz
i'm 3 seconds shy of sub 8m category
that is scary indeed
11-30-2008, 03:04 PM
ToyTen

3600......ToyTen...............11.51.875.....6x600 .....960mhz.....7-6-5-16....5/8...X48

http://images4.hiboox.com/images/490...30db9e7942.jpg

WinXP Pro Sp3 made with nLite, installed on a WD 320 partitionned and lots of tweaks including a home made CW. I still have to install this new OS on a Raptor(16Mo) and hope it will improve the score ;)
11-30-2008, 05:14 PM
dinos22

here is one for the new 7.xx category and Nehalem :up:

4644......dinos22...............7.59.234..... 21x221 .....885mhz.....7-7-7-20-1T.......X58

http://img367.imageshack.us/img367/5...turbocoxo1.png
12-01-2008, 10:06 AM
TheKarmakazi

nice run dinos! good ram speed/timings for 920 dividers
12-01-2008, 12:55 PM
George_o/c

Toyten you have to lower a bit your cpu clocks, so that you climb up in 11.xx category ;)
Dinos, great run man :up: 920 @ 4650MHz on Single Stage benching SPi 32M is :eek: What's the max frequency this 920 can reach ? Max 1M ?
12-01-2008, 02:06 PM
ToyTen

@George_o/c:

I just.. do not know how to stabilise the computer with thoses settings(I tried 3 days ago the last time ...) no go for me on a P5E3 nor a RE...
Can't get to know why:ROTF::( me ??(hoping I still can find howto :) )
12-01-2008, 02:14 PM
George_o/c

You need to mess with REX for a lot of time, so that you get to reveal the beast inside her :yepp:
Start with some guides on various internet sites (overclock.net, overclockers.co.uk off the top of my mind), and the most important for SPi 32M ... Play with various BIOSes ;)

Forget all about P5E3, and mostly focus on REX for fast SPi 32M runs :) My gosh, I've told you before but can't resist, your ram kit is superb ! :eek:
12-01-2008, 02:27 PM
ToyTen

Quote:

Originally Posted by George_o/c

You need to mess with REX for a lot of time, so that you get to reveal the beast inside her :yepp:
Start with some guides on various internet sites (overclock.net, overclockers.co.uk off the top of my mind), and the most important for SPi 32M ... Play with various BIOSes ;)

Forget all about P5E3, and mostly focus on REX for fast SPi 32M runs :) My gosh, I've told you before but can't resist, your ram kit is superb ! :eek:

one more BIOS to test I think at this point: 0401. only got her 5 days ago and working/living a normal guy's live so time misses as you know.
I got 10Mhz fsb, from 620PL9(P5E3) to 630 PL9 using the REX on 32M (0501):
http://images1.hiboox.com/images/490...28c759979b.jpg

NB and CPU water cooled ambient like 20°C NB was at 38°C (reading LCD poster)

I still can find out because I have so many things to discover about HDD, OS, timing in execution of the bench its steps, ...

I'll look for those sites you propose thx. I never went there atm ;)

And this DDR3 is comfortable I know, but are they that bad :p: no idea :confused: i tell you
12-01-2008, 03:11 PM
George_o/c

Belive me your ram kit is pretty damn' special ;) A lot of guys wish to have one like that one :) (including me :D)
12-01-2008, 04:18 PM
dinos22

Quote:

Originally Posted by George_o/c

Dinos, great run man :up: 920 @ 4650MHz on Single Stage benching SPi 32M is :eek: What's the max frequency this 920 can reach ? Max 1M ?

this is a QPI limit every board has
its not the CPU limit :D
12-01-2008, 06:23 PM
George_o/c

LOL, I need to get some sleep dinos :p: Well, it's good that you can run with such a QPI clock SPi 32M :up:
Well, what's the max benchable frequency for 1M, and what's the max of this cpu with higher multi - lower QPI clocks ? :)

I've seen two great 920s ... yours and Criminal's ;)
12-01-2008, 06:46 PM
dinos22

Quote:

Originally Posted by George_o/c

LOL, I need to get some sleep dinos :p: Well, it's good that you can run with such a QPI clock SPi 32M :up:
Well, what's the max benchable frequency for 1M, and what's the max of this cpu with higher multi - lower QPI clocks ? :)

I've seen two great 920s ... yours and Criminal's ;)

i am on the highest possible multi basically
i am at a QPI wall which i cannot bypass as intel does not provide dividers lower than 18x(X36 in GB bios)
12-08-2008, 08:16 AM
TheKarmakazi

Quote:

Originally Posted by ToyTen

And this DDR3 is comfortable I know, but are they that bad :p: no idea :confused: i tell you

You have no idea, thats an awesome ram kit :up: Such tight subtimings :clap:
12-08-2008, 11:00 AM
Brian y.

A little 4GHz 32M action with i7

Sub 9m:up:

http://img252.imageshack.us/img252/3...4ghz32mdl7.jpg
12-08-2008, 11:22 AM
ToyTen

Quote:

Originally Posted by TheKarmakazi

You have no idea, thats an awesome ram kit :up: Such tight subtimings :clap:

Well, I don't know the chips of it tbh. They behave very similar to 14400 D9GTR (Cell Shock too), but with more OCeability

I know a few happy guys more lucky with better one:yepp: crazy D9GTS/T or ??

Some times I need over 2,26vDDR :( (well cooled be sure of that ;) ) and never got over 2,30 atm... I don't dare with air cooling on it.
12-08-2008, 11:37 AM
TheKarmakazi

Quote:

Originally Posted by ToyTen

Well, I don't know the chips of it tbh. They behave very similar to 14400 D9GTR (Cell Shock too), but with more OCeability

I know a few happy guys more lucky with better one:yepp: crazy D9GTS/T or ??

Some times I need over 2,26vDDR :( (well cooled be sure of that ;) ) and never got over 2,30 atm... I don't dare with air cooling on it.

My CSX Diablo 2000Mhz kit can hit similar clocks 7-6-6-15/18 1T, but your subtimings particularly tWTR & tRTP are very nice.
12-08-2008, 11:48 AM
ToyTen

Quote:

Originally Posted by TheKarmakazi

My CSX Diablo 2000Mhz kit can hit similar clocks 7-6-6-15/18 1T, but your subtimings particularly tWTR & tRTP are very nice.

also GTR chips on CSX. And how far did you went about Voltages, if I may ask ?
12-08-2008, 12:13 PM
TheKarmakazi

Yes they are GTR. I never went over 2.11v (too scared to lose them), which is probably why you can run such tight timings. I love the 5:8 strap on this mobo for CL7 clocks. What NB voltage are you running?
12-08-2008, 12:19 PM
ToyTen

Quote:

Originally Posted by TheKarmakazi

Yes they are GTR. I never went over 2.11v (too scared to lose them), which is probably why you can run such tight timings. I love the 5:8 strap on this mobo for CL7 clocks. What NB voltage are you running?

My cell's don't run hot at all, as for the verylittle consolation it brings :)

1.84vNB, 620 PL8 on the test at the moment.

Edit: it passed !! woopah ^^
12-08-2008, 12:57 PM
TheKarmakazi

Quote:

Originally Posted by ToyTen

My cell's don't run hot at all, as for the verylittle consolation it brings :)

1.84vNB, 620 PL8 on the test at the moment.

Edit: it passed !! woopah ^^

Very nice lets see :D :clap:
12-08-2008, 01:02 PM
ToyTen

Quote:

Originally Posted by TheKarmakazi

Very nice lets see :D :clap:

there you go. but as it was only a test, I didn't tweaked my mem's

http://images2.hiboox.com/images/500...54fe79f0d1.jpg
12-08-2008, 01:29 PM
George_o/c

Wow, PL 8 at 620MHz FSB ! :up: Great :clap:
12-08-2008, 01:40 PM
ToyTen

Thx, I just received a particular setting to apply and it went ok this time :up:
12-08-2008, 02:49 PM
Harshal

Dino, Nice run! Good CPU!!
ToyTen... awesome RAM and board :D
12-08-2008, 03:21 PM
dinos22

i think we will see sub 8 minute below 4.5GHz once the RAM clocks are right and all subtimings are tweaked fully :)

Show 100 post(s) from this thread on one page