i have taken the mobo out of the case but still no go :( (get the same beep)
anyone know what could be the problem?
Printable View
i have taken the mobo out of the case but still no go :( (get the same beep)
anyone know what could be the problem?
Any progress with new bios? Today I get new RAM kit and still cant go over 2.2V :(Quote:
Originally Posted by Enoc
awhir >> try to pull out your cmos battery for few mins, check if your NB core isnt damaged.
Quote:
Originally Posted by ent
I have the same problem. Latest official BIOS, when I set 2.2-2.3 VDIMM I get Memtest errors @ test #5, with SuperTalent 2x1GB DDR2 800 4-4-3-8 2.2V.
I'm running 3.62Ghz, DDR2 906 4-4-4-12 2.0V
Can't get it stable @ FSB500... I don't know what happens... it posts perfectly but it never start booting up. :shrug:
Config:
E6420 "ES"
DFI P965-S
2x1GB SuperTalent DDR2 800 4-4-3-8
TR Ultra 120 Extreme
I hate the Vdrop of this motherboard... is there any vmod?
I think I solve my problem after 2 weeks of fight with this mobo. Today I set voltages:
CPU: +150mV
VTT: 1.425 V
vDIMM: 2.4 V
vNB: 1.6 V
vsb: 1.5V
2nd vsb: 1.05V
vNB must be set to 1.6 to work with vtt=1.425 and vtt=1.425 is needed probally for higher vDimm.
Didn't I say that Vtt is the key :yepp:Quote:
Originally Posted by ent
Ent i'm more stable with the 424 bios...but now i can boot 6x515 1:1...with 703...would not get into windows...:)
i want to change my ram too...these ballistix are not doing well...they scale well 2:3 cas 5..but 1:1 cas 4..needs a lot of volts...
to open more vtt options you just have to raise the sb voltage...
yotomeczek what are your bios settings? i saw you hit 555 over at ocx...:D
What is the higher FSB that anyone got with this board?
590 in windows...by Pt1t :up:Quote:
Originally Posted by Monstru
Well, the link doesn't work so I don't know what the beep is. If it's a single long beep it indicates DRAM error. The other one is video error code that is one long keep and three shortQuote:
Originally Posted by awhir
beeps. Can anybody help me get past 9x376? At 3.4GHz my hd's seem to crazy and at the boot I get a message that some windows file is corrupted or missing. I have managed to get the comp booting at 3.4GHz to desktop but only thing that I see is the wallpaper and the taskbar or the icons are not loading up (=harddrive going crazy?). Works fine at 3.3GHz and is 10h Orthos small fft's+3Dmark05&06 stable. I tried upping the nb and sb voltages bit but they didn't seem to have any affect. pci-e bus is set to 100MHz and spread spectrum is disabled. Power saving features shouldn't have anything to do with this so I have them enabled. Vcore is upped three notches from bios and vdimm is at 2.1v. Any advice is welcome :)
What's the mem's divider ?Quote:
Originally Posted by Nazu
4:5=667MHz. Nb strap is on default.
4:5 is hard on this board (need high Vmch, Vtt) ... my best is about 395fsb with 4:5Quote:
Originally Posted by Nazu
Try 1:1 and find max fsb (Vtt helps a lot)
Vtt + high enough VNB :DQuote:
Originally Posted by yotomeczek
I got it stable at 500 with 424 bios, but this is almost the limit of my CPU (about 503), so Im quite happy with it :DQuote:
Originally Posted by Enoc
Thanks man! It helped, I'm running Orthos now @ 3.4GHz.
nice :up: ,Ent if you want to open more vtt options just raise the vsb :)Quote:
Originally Posted by ent
I know, but right now I dont need more vtt :D, today I will try to get some nice RAM clocks with my new sticks on this mobo :DQuote:
Originally Posted by Enoc
How much can I raise the VTT voltage? I'm using the 1:1 divider and it's 10h Orthos stable and the temps are ok.
hi i am running raid atm.today when i got home my pc was hannging in the middle of a "bad boot error" said the way to fix this was by insirting ur vita cd and doing a reapir but my problem is the when i have raid enabled my bois will not boot the cd but go straight to the error i get when trying to boot windows.
when i plug out the 2 hdds and the bios raid program cant find them it auttomaticly boots the cd then but that doesent help as i cant reapir my windows.
i have cd first in my boot order but i dont know why it wont boot the cd when it can see my 2 harddrives.
is there a bois seeting that can fix this can some1 please help.
DFI Infinity Dark-S P965 @ 530Mhz :p:
http://img211.imageshack.us/img211/7...0mgzfsbpe8.jpg
1,5V is save 100% (Intel spec)Quote:
Originally Posted by Nazu
You donīt need 1.5v VTT, look at my SS, 1.45v itīs OK for 530Mhz :up:Quote:
Originally Posted by yotomeczek
Some thoughts about this board...We have 2 P965-S and one simple (non S) version. From personal experience I found out that the S version gets a little bit hotter. The Non-S version stays really cool (NB and SB heatsinks) but the S versions sometimes needs additional cooling. The NB and SB heatsinks get very hot.
Another thing that I have noticed with this board is that it really doesn't like quads. We had an Q6600 3DM2005 stable at 3600Mhz on a different board, but we couldn't get it past 3015Mhz on this board.
Didn't have too much trouble with my B3 :)
3.6 Ghz 32 Mb Pi 3-3-3-10 DDR2-800 1.43v
http://img375.imageshack.us/img375/8...titakc3.th.jpg
3.6 Ghz 32Mb Pi 4-3-3-9 DDR2-800 1.43v
http://img375.imageshack.us/img375/9...itanig6.th.jpg
3.6 Ghz 32 Mb Pi 5-5-5-15 DDR2-1200 1.43v
http://img375.imageshack.us/img375/5...titakp8.th.jpg
12 + Hours Prime 3.3Ghz 1.4vcore 1.36vdroop
http://img475.imageshack.us/img475/9...7vdrnl7.th.jpg
Well....I am really curious how many P965 owners managed to get a quad working like that on their board. For the record, what bios version did you used?
I didn't have any luck with a B3 or G0. I have never thought it is a great mb. I hate that you have to use 1:1 on memory. I hate the memory testing when posting.
There are too many users who have had trouble with quad to say this is a good quad mb.