Printable View
C2D 6400 step L2 ES (WR)
Abit AB9 Quad GT (Bios béta) ;)
2x1go Cell Shock Pc 8000 c4 EPP (Ex WR)
Big Typhoon Broken :D
Vcore : 1.395v bios
Vddr : 3v
Vfsb : max
Vmcp : max
Vich : max
Vnb : max
http://www.membres.lycos.fr/boblemag...0GT/Fsb500.jpg
What do u mean by (Bios modded)?
Sorry bios Béta (which is available some front pages)
Is anybody using raid 0 with the latest beta bioses? Can you confirm that it's working fine?
what do you mean by 6400WR?
Great clocks on the memory though. have you tested with 4-4? bingo found that it was faster then 3-3 becausee of subtimings, my results backed thatup.
Quote:
Originally Posted by georgesod
about 20 people in this thread have confirmed that also in both of anantech's reviews it is confirmed as working. One person has had an issue but the general consensus is that he just got a buggy one.
Just WR fréquency by E6400 ;)Quote:
Originally Posted by Revv23
http://valid.x86-secret.com/cache/171644.png
http://valid.x86-secret.com/show_oc?id=171644
The Quad GT dont like 2go with the top of 600mhz (I have evil has benchs in cas 4 or 5) whereas I make 660 4/4/4 or 5/5/5 on NF6 :)
I Prefer Benchs max 3/3/3 (534mhz 3/3/3/8 at 3.5v réel with EVGA NF6)
man down for real ...
after last nights memtest run (8 hours) I just can't get my network (gigabit lan) back, it doesn't show up in the list at startup and doesn't show in windows ... even after powering down for over an hour ... can this have something to do with my overclocking attempts ? do any of the bios changeable volts have an affect on the lan-chip ? I can still enable/disable it in the bios...
thanks for the info about the usb-boot issue !
what Lan Dies ? ive never really memtest more then 3 hours but wth it sould not do anything to it unless maybe pci bus freq
No way?!? Dammit, i'd been hoping that it was a 'feature'. Maybe a check gone wrong at shutdown / startup due to overclocked timings, then disable for safety till a restart.Quote:
Originally Posted by bladebel
It's a bit worrying if it'll go missing under a STABLE overclock (mine definately wasn't, though could boot and run windows). You tried leaving the CMOS on reset while the PSU is disconnected, or taking the battery out?
why the latest beta is so big? 1 megabyte? i'm tolking about the M621E_11A.B06 ..... and which are the improvements with this bios?
thanks
ok, lan is back, did the cmos clear thing while the powercord was disconnected; don't know if that did it but i'm back :) let's hope it stays thay way ...
now I still have to get my SB xfi working; last time I tried to install it it bluescreened during driver install and windows wouldn't boot :(
guess it's my lucky week :p
Quote:
Originally Posted by bladebel
are you moving to this board from an old windows install?
it partially fixes the USB issue, i think it also helps some of the RAID / IDE issues though i don't run RAID so not sure on that one. Anyway...Quote:
Originally Posted by ztop
The abit forums are back up at last :-) They'll have a change log along with the latest beta.
You can use the win32 flash tool to set the beta bios from inside windows, which is just as well cos it won't fit on a floppy :-)
i want to flash it from dos with floppy, wich is the correct procedure?Quote:
Originally Posted by dis169
thanks
Think your out of luck, you can't use a USB boot disc (well, i couldn't due to the bios issue). Wouldn't fit on a floppy and my normal bootable DVD disc had 'issues'.
The windows flasher is an abit one, works fine except on the first boot it needs a CMOS reset.
http://www.abit-usa.com/downloads/bios/flashmenu.php
no, did a full reinstall like I always do when switching mobo ...Quote:
Originally Posted by Revv23
xfi just won't work properly; from within regular windows, it blue screens and/or hangs during driver install; I can install properly from safe mode (+webupdate 4) but once i get into regular windows it hangs/blue screens ... very strange behaviour
wrt network: it usually dissapears when something else went wrong (eg after installing the xfi); just now i DID have the network card visible in windows but now with the cable disconnected sign (which clearly wasn't the case), restoring and rebooting didn't help, I had to clear the cmos for my network cable to be detected again :stick:
something really fishy or just lots of bad luck ... never had so much trouble upgrading (maybe I should've sticked with AMD :slap: )
odd i came off of a P5B-D without reinstalling windows and my XF-I works fine, try reseating it in a different slot, make sure the onboard audio is disabled.
Have you downloaded the latest intel INF files?
If you really need to do it from a floppy use one floppy for booting and another for flashing. (make one bootable floppy disc, then once it loads up command.com, put the disc with the bios and floppy update utiliy in and run it.Quote:
Originally Posted by dis169
No reason though as winflash works well.
i tried the two pci-slots, same result, onboard audio is disabled;Quote:
Originally Posted by Revv23
don't understand the intel INF files - thing, where do i find them ? or do they come with latest windows updates ?
Go to intel's web site and go tothe downloads section and download them for your 965 chipset.
had the same problems after lots of overclocking testing , did a bounch of things trying to fix it reinstal drivers installing drivers bak bios reset rerereset bios took battery out u name it with no luc, i installed an ethernet card and solved that problem, dont really bothers me now since im using a card,Quote:
Originally Posted by bladebel
:fight:Quote:
Originally Posted by Revv23
:slash: That one person is RMAing his board and trading the working one to his roomate for an EVGA 680i :bounces:
I came of a P5WDH Deluxe (975X) without reinstalling and everything works just great! :)Quote:
Originally Posted by Revv23
Same audio-drivers etc.
for now I've given up on installing the xfi, i will try again this weekend ...
another question: what prog currently measures temps correctly ? uGuru : 62° under full load at 3600mhz / 1.55 v and core temp beta 0.94 gives 72° ...
I have a tuniq tower 120, do these seem ok ? (hoping that the uGuru is the correct one :p)
I would bet on core temp, especialy at that voltage