Printable View
Hasn't koolance any?
I know they aren't the best performing, but they're always very thin.
http://www.koolance.com/shop/product...products_id=87
http://www.koolance.com/shop/product...roducts_id=104
http://www.koolance.com/shop/product...roducts_id=105
Any of these should seem to fit.
I know, there are better out there, but watercooling is always better then air, so it could be the next best thing ...
Nice! I wonder if their connector is like the one on my dearly departed A7N8X-D as I could use the Asus optical out slot daughter board with it and dance around like the Dean of happy from happy university.Quote:
Originally Posted by Blindbat
Great to hear that this beast now supports bank interleaving as my gig of Twinmos BH-5 will be in this mobo and loving the bandwidth. Gotta try for that CAS 1.5 when I get her.
Will enabling interleaving affect ocing performance at all?
Thanks Zav :)Quote:
Originally Posted by ZaVkE
Only problem is the fittings look a bit on the small side- really need at least 3/8" id tube. Maybe I'll just have to go to the machine shop.... ;)
in the same site you got adapters to go with the wb cooler
http://www.koolance.com/shop/default.php?cPath=25_36
yeh, since the early via athlonxp chipsets had interleaving, and 512mb was the normal max back then, it would have had to been 2 way
I don't have one yet. I will hook my Graphics card to my cascade today and should get around 42500 if all goes well.Quote:
Originally Posted by daniel734
OPP
As far as interleave goes, it's not the same as the old days.
These days, and this may be because of the AMD onboard memory controller, it goes by Gigs. Total of 512Mb gets you No-way, 1Gig gets you 2-way and to get 4-way you need 2Gigs. This has been the way it is since the S940 FX-51 through out my testing, and on both Via and nVidia chipsets.
OPP
Quote:
Bigtoe
3.4Vdimm for 264 1.5-2-2-5
WOW.
Thanks man, that pretty much hammers the last nail into the purchase decision ;)
Man I am so lost with all these new boards. DFi has 3 NF4 boards out. The Ultra-D, SLI-D, and the SLI-DR. I am so confused as to which has which and what I should look into. So all 3 accept 2 video cards but can work with just 1?
heres what i think plz correct me if im wrong
ultra- atm 2 slots pci-e 16x, have to do sli "hack" to get 16x/2x cards to work. that information is at anandtech.
sli-2 video cards 16x/16x, good performace, just lots-o money. :(
then if it has name-Dthen a R, r has to do with something with raid. there are many posts about this, at dfi-street, and here. also any of the boards just run off 1 16x card, if the board is for sli, it DOESNT have to be in sli all the time. hopefully that answered your question. and feel free to correct me.
and the dfi ultra can be modded into FULL SLi 8x/8x
anybody know how much the dfi costs.. haven't seen it in any places yet.
They have the Ultra-D and the SLI-DR at ZipZoomFly for pre order.
Does that help?Quote:
DFI LANPARTY UT nF4 ULTRA-D nForce4 Ultra Athlon 64(FX) Skt939
http://www.zipzoomfly.com/jsp/Produc...uctCode=246486
price = $155
DFI LANPARTY nF4 SLI-DR nForce4 SLI Athlon 64(FX) Skt939
http://www.zipzoomfly.com/jsp/Produc...uctCode=246485
price = $227
...my $0.02... :cool:
Hey,
Just some general questions about this board.
What are the rounded cables like that come with it? I heard you can have corrupted data and loss of data with rounded cables?
And hows the Karajan onboard sound?
Thanks!
Rounded cables don't cause any problems, why would they?Quote:
Hey,
Just some general questions about this board.
What are the rounded cables like that come with it? I heard you can have corrupted data and loss of data with rounded cables?
And hows the Karajan onboard sound?
Thanks!
Ok,
Now is there enough rounded cables with this motherboard to have...
-Floppy Drive
-DVD Drive
-CDRW Drive
-SATA Hard Drive
-ATA100 Backup Hard Drive
Thanks
zipzoomfly and preorder shouldn't even be in the same sentence. :rolleyes:Quote:
Originally Posted by DustMite
DFI goes straight to #1:DQuote:
Originally Posted by daniel734
OPP
http://www.xtremesystems.org/forums/...id=23090&stc=1
Quote:
Originally Posted by OPPAINTER
OPP, you show that turd who's boss! :toast:
Gratulations OPP, nice run, and not with extreme gfx-clocks I see, more to come then ;)
you got yourself a PM aswell :)
you've got the second lowest CPU clock speed on that screen shot...:drool: Just think of what that thing will do once its the highest clocked CPU on that page...Nice job!
jjcom
It's on the "beta" DFI server. Do a google search for DFI beta bios. ;)Quote:
Originally Posted by H2OGun
WOW, just WOW