Ha ha...... yup....... just think what the whole case could do :rolleyes:
I look forward to seeing more 3570 power :up:
Printable View
Ha ha...... yup....... just think what the whole case could do :rolleyes:
I look forward to seeing more 3570 power :up:
Stelios - 6:17:265 - 49x102.1 - 1327MHz - 7-10-7-28-78-1 - Asus Maximus V Formula - G.Skill PC16000CL6 2X2GB PSC XE - 2.07v - CPU air - RAM cascade cooled -110C
http://i781.photobucket.com/albums/y...o/Shot2044.jpg
First test with G.Skill kit under subzero . Seems nice so far . :)
Any of you running at 2800Mhz 7-11-7 ???? I'm capable of 4 loops so far , but i'm sure i'll be able to make it complete . Perhaps not with this board as it also feels to me there are some issues .... So , i have a UP5 and UP7 here . I guess i'll choose the UP5 for my next runs . I don't have any BBSE so it's my best option .
PS . Where are pro's scores at 1400CL7 ??? I can't find them .
I have serious doubts you will reach 2800 on up7 as there lots of guys not capable of hitting 2666 on that board...U can try Up5 and Asrock OC formula,see what works best...but i would start with asrock first :)
UP5 has been a blast for me... too bad it got bricked...
slight better mem oc compared to maximus gene and extreme and to be honest better efficiency...
The leader board begs to differ;)Quote:
Originally Posted by crustytheclown
In all honesty though the UP5 seems to be the best of the Giga boards for PSC while most all of them seem to do well with BBSE, however the UD4H was looking good this weekend, full bank 2800 c9 32M stable with low vccsa and vccio on the Samsung based kits.
Yeah im still thinking of getting a UP7 to see how it goes with memory under cold,should have a refill in a week or so ,will keep pushing
@ crusty,you bricked the UP5 while benching memory?
not at all, out of a sudden i get a6(or ab) debug code and cannot get into bios,nothing to do with memory...
double checked everything cpu,with and without vga,mem,psu but nothing can change this...
too bad it has been a great overall board
Cant remember if I had that code once,think I took Cmos battery out for a bit and pulled cpu out and reinstalled it and it was fine.Just cant remember if mine was same code thoQuote:
Originally Posted by crustytheclown
Edit ,you tried back up bios too?
It's here http://www.xtremesystems.org/forums/...Z77-capable-ofQuote:
Originally Posted by Stelios
yes both bioses do the exact same thing
UP7 might run better now with the new think its f6... bios over on TT
If anyone tests it please let me know or post in the UP7 thread what you find, sorry I don't have time to rig up & test atm.
Tested some 2133 8-9-8 BBSE and they are very nice, only 1.87v on air
http://i.imgur.com/gWIEzP7.png
^^^^ I spy a very nice looking 3570K as well :up:
:DQuote:
Originally Posted by l0ud_sil3nc3
It'll also do almost 3100 mem at ambient temperatures!Quote:
Originally Posted by C-N
shhhhhhhhhhhh:p:Quote:
Originally Posted by bassplayer
only with the secret sauce memory:yepp:
interested to see those frozen l0ud :)
Me too, just have to get a 3770K to make it worth while :)Quote:
Originally Posted by Splave
The set I got from Zen, does not scale with cold very well, hopefully these do a bit better.
First post updated.
will be very helpful if you can bold ICs or we all move to other thread importing this thread :D with IC categories
A lot of job Allen * ?
That will be a lot of work... :D
Maybe I'll make all the ICs bold tomorrow.
By the way I couldn't add your scores from post #1366, please resubmit if you want me to add them. :)
Nice thanks for the time
here is the screen with details
Hiwa - 6:17:672 - 50x100 - 1333MHz - 8-11-7-22-72-1T - MVE - 2X2 GSKILL 16000Trident BBSE- 2.05v - mem air cpu ss -20
http://img803.imageshack.us/img803/407/screen009u.jpg
Alex-Ro - 6:18:312 - 49x102.1 - 1429MHz - 9-12-12-23- - Asus M5 GENE - Corsair Platinum 2666 CL10 2x4GB - 1.92v - Cpu+Ram@Air=5 C.
Cold weather rocks,wondering if these would pull 2933 9-12-12 with 2V :rolleyes:
http://img855.imageshack.us/img855/121/snaphsot0010.png
^^^ Holy crap man..... nice run & just 1.92v as well :up:
I have seen these sticks run 2900 10.12.12 somewhere round here on cold air.
Brace yourselves :D
Alex-Ro - 6:18:250 - 49x102.1 - 1429MHz - 9-12-12-23- - Asus M5 GENE - Corsair Platinum 2666 CL10 2x4GB - 1.92v - Cpu+Ram@Air=5 C. 3570K
http://img818.imageshack.us/img818/9396/618250.jpg
Alex-Ro - 6:18:172 - 49x102.1 - 1429MHz - 9-12-12-23- - Asus M5 GENE - Corsair Platinum 2666 CL10 2x4GB - 1.92v - Cpu+Ram@Air=5 C. 3570K
Managed to crack another miliseconds,think this is maximum i can extract from this platform
http://img209.imageshack.us/img209/4...phsot0011p.png
strong mems and imc there alex :)
- all scores added up to this post
- ICs added for all the scores that were missing IC info ( only if I know the IC for sure of course )
- new top 3570K score marked
Enjoy! :up:
165k views :X wowzers
l0ud_sil3nc3 - 6:18:953 - 50x100.0 - 1300MHz - 8-11-7-22- - Asrock Z77 OC Formula - G.Skill 2133 8-9-8 2x2GB - 1.87v - Cpu LN2 / memory air 3570K
http://i.imgur.com/wIdI5Sb.png
Still implement this rule?
I saw some scores exceeded this limit.Quote:
1. Screenshot Requirements:
5ghz +/- 3mhz
Screen shot just for info if anyone's interested.
After seeing Alex-Ro's post I thought I'd have another look at 2860 10.12.12 to see if I could match 2800 9.12.12. Looks like with a little more tweaking 2860 10.12.12 could run shoulder to shoulder with 2800 9.12.12 using a fair bit less voltage. I killed the bios after this shot recovered it then killed windows so that's it for now.
20oC ambient in a case.
http://i106.photobucket.com/albums/m...2126M18859.png
More volts than I wanted to push through these sticks that I'm supposed to be saving for Haswell but hay ho it was worth it.......
C-N - 6:18:141 - 49x102.09 - 1430MHz - 9-12-12-22-114-1 - Gigabyte UD5H - Corsair Platinum 2666 CL10 2x4GB (Samsung HCH9) - 1.99v - Stock Air
Ambient 17oC
http://i106.photobucket.com/albums/m...2126M18141.png
Crap,i remember i tested my samsungs and passed couple of loops at 2933 9-12-12 at 2v+ with -5 ambient,i might switch mobo to feel my wrath.....:D Joking aside,great run :)
Thanks mate it was good fun :up:
I'm sure there's a little bit more left in 2860 C9 sub 18 should be doable but for me that's enough. I'm not even going to attempt 2933 but by the sounds of it you are real close.
He he if you feel the wrath maybe try 104.17 x 48 that'll get you 5G & 2917 ish & you can work from there if your sticks don't melt first :D
Awesome run C-N:up:
Next stop is sub 18 with samsung:D
Oops, I thought it was +/- 5 MHz, don't think I saw a score that exceeded this limit.Quote:
Originally Posted by owikh84
You guys will have to decide if you think this is still okay, or if you want to stick to 3 MHz.
Really nice work C-N and Alex-Ro,
Hey guys,I thought since im starting to use this forum more now and some nice people on here its about time I paid my subscription,I am Extreme :yepp:
I look forward to posting and viewing plenty more results
Bull
:eek: 5G Haswell at least 6s less, did not think about that range.
Yeah Ive heard at least 6 sec less too,but a full efficient run i think 10s+ less,from what Ive heard.Quote:
Originally Posted by angoholic
Exciting times ahead
:yepp:
Woohoo,maybe sub 6 mins :D
Guys, quick question...got 4x2gb psc good for 2400mhz and 2600mhz with decent timings under 1.85v. Which should I run to benefit from that config? XP should do better, but it's only 32bit (xp 64 was a mess from what I gather)
Thanks! :p
xp32 you use maxmem anyway ;)
Yeah...figured so, but the whole 4x2gb thing still confuses me lol xD
with 32 bit still every stick is used, but memory is limited. anyway as alex said, you use maxmem limitation and spi does not need that much memory ;)
Yeah...it's an interesting art form, superpi 32m tweaking that is.
I got microxp atm, gonna try a few different oses and tweaks before submitting anything.
Doubt I can do any better than the top scores though :p
Hey Ivan,I use XP 32 std copy then do all the tweaks to OS,disable all unwanted services
Quote:
Originally Posted by Ivanlabrie
nachtfalke - 6:18:000 - 49x102.1 - 1429.8MHz - 9-12-12-21-115-1 - Asus M5E - G.Skill TridentX 2666 CL10 2x4GB (Samsung HCH9) - 1.92v - Stock Air
http://i900.photobucket.com/albums/a...psbf49b1df.png
Awesome run nachtfalke:up:
Can you try to run 5ghz +/- 3mhz?
I think we should allow 5000 +-5 mhz.One reason,100 mhz in 32M equals 6 seconds on ivy at this freq level,so 2 mhz would mean 0.012 sec,plus it's all about the clock divider on mobo's,which variates between 5002.9-5004.
Just my 0.02$
3770K this time :D
C-N - 6:17:531 - 49x102.09 - 1430MHz - 9-12-12-22-114-1 - Gigabyte UD5H - Corsair Platinum 2666 CL10 2x4GB (Samsung HCH9) - 1.97v - Stock Air
20oC Ambient
http://i106.photobucket.com/albums/m...2126M17531.png
Excellent score, C-N! :up:
Indeed,congrats!
Nice work C-N,some awesome results on air and Gigabyte UD5H :up:
Yup on air all cased up just remove the side panel & let her have it :DQuote:
Originally Posted by bullant
Could do with a DDR3 memory booster/stabiliser if anyone knows of such a thing. Like the OCZ one from 10 years ago but for DDR3.
That would be sweet :p
Wow you guys are still going strong with this. I should improve my time, got a lot of high bin samsung and some new PSC ram to test.
edit: faster time at #1462
Wow I still got a lot to learn it seems. No way I can do sub 20 :confused: Here my best run with some mediocre PSC. What they lack in quality I make up for with volt and cooling :D Running twcl 7 here with.. ehm... 2,1 volts.
Calathea - 6:21:500 - 48x104.2 - 1250MHz - 7-11-7-26-76-1 - Gigabyte UP4 TH - Corsair Dominator GT 2000 CL8 2x2GB (PSC) - 2.10v - RAM TEC cooled -14 C, cpu on H70
http://i1050.photobucket.com/albums/...psc56b06f6.png
I think it is just a matter of tightening up tertiaries and adjusting a few secondaries. I would raise tFAW to 20 and lower tWR to 10, then try a dram refresh interval at 10360.Quote:
Originally Posted by Calathea
Tertiaries should be 1 1 1 1 4 4 1 4 4, then you should be sub 20 no problem.
l0ud_sil3nc3 - 6:20:391 - 50x100 - 1300MHz - 8-12-8-28-96-1 - Asrock Z77 OC Formula - Cruicial Ballistix 2133 9-10-9-24 2x2GB (PSC) - 1.89v - Stock Air
http://i.imgur.com/iPhmwpf.png
Thanks for the motivation loud! Not quite there yet, but well on my way. Waza tweaking and a lot tighter subs:
Calathea - 6:20:375 - 48x104.2 - 1250MHz - 7-11-7-27-76-1 - Gigabyte UP4 TH - Corsair Dominator GT 2000 CL8 2x2GB (PSC) - 2.10v - RAM TEC cooled -15 C, cpu on H70
http://i1050.photobucket.com/albums/...ps58f9bc3a.png
http://i1050.photobucket.com/albums/...ps2ec1c36b.jpg
I need cold air to get any decent sub zero temps on ram, TEC is only able to get ~ 20 C below water temp. I've seen -21 but then it was freezing in here :shakes:
The tec is cooled by the H70 or did you mod it into a loop?Quote:
Originally Posted by Calathea
Nice score, bet you can do better with such beast setup :p
From the pic, it looks like only the cpu is being cooled by the H70, with the TEC being part of the loop that uses the reservoir that is visible just to the right of the H70 radiator.Quote:
Originally Posted by Ivanlabrie
Quote:
Originally Posted by Ivanlabrie
Yes the TEC (Corsair ICE T30) is cooled by a 240 rad placed on the side of the dimastech table. 240 is overkill, heat load in magnitude of 100-130W but well, it works good. H70 only for cpu. Would be cool to mod the TEC into a H70 for very simple and easy to handle TEC cooling though :DQuote:
Originally Posted by Reefa_Madness
I will try on 1300+ cl8 today, I think it's faster.
Hey Calathea,will those Dims not run @ 26 memory Multi?With the right vtt, imc volts combo this may help you,the other thing you can disable HT,I like your setup
Hi bullant. Yes they will run 26 multi. I'm just a little old school, I'd run cl6 if I could :D 2600 7-12-7 is a no go with this temp and sticks so will see how they perform on cl8.
Cool,yeah your still doing good with those sticks,nice too meet you :up:Quote:
Originally Posted by Calathea
very nice dudeQuote:
Originally Posted by C-N
Calathea - 6:19:844 - 49x102.1 - 1327MHz - 8-12-8-28-78-1 - Gigabyte UP4 TH - Corsair Dominator GT 2000 CL8 2x2GB (PSC) - 2.04 - RAM TEC cooled -15 C, cpu on H70
http://i1050.photobucket.com/albums/...ps437ea354.png
http://i1050.photobucket.com/albums/...psfdfd02e3.png
Finally you made it sub 20! Congrats! :up:
I'll make an update on Sunday.
Still cant thank you yet,must need 100 post? but thank you Don Dan the old fashion way for keeping thread updated
I think you will get better time with 1300MHz tRRSR 4, if 4 is possible. But great time anyway!Quote:
Originally Posted by Calathea
Thanks! 1300 trrsr 4 is possible but seemed a little bit slower than 1327 trrsr 5. I think with these mems I'm pretty much done. Should try some 4x4 Dom Platinum 2666 C10 now.Quote:
Originally Posted by Asmola
Thanks Don_Dan. Keep up your good work updating this.Quote:
Originally Posted by Don_Dan
Hey guys so Ive bee testing memory's on air lately,still no Ln2 yet.
PSC Dram 1.94v Air ,Temp 15c to 18c,CPU -25 2742MHz 7-12-7-30 single channel 32M Pi stable my best stick
http://s23.postimg.org/8pifgncrv/kkx3.png
http://s9.postimg.org/uasvs4wyn/DSCN7043.jpg
It's already Monday but the update is done. :up:
Yes, you need 100 posts to do it, but you can thank me by joining the XS HWBot team! :p:Quote:
Originally Posted by bullant
Thanks! :)Quote:
Originally Posted by Calathea
[QUOTE=Don_Dan;
Yes, you need 100 posts to do it, but you can thank me by joining the XS HWBot team! :p:
Thanks for the offer Don_Dan,at this stage I wouldn't have time to really help a team out on points and stuff with work commitments,but really appreciate the offer and would definitely consider it when I feel i can contribute too a team
Hi,
some little test ram on cold,Trident 2000 Cl9 PSC (XDX)
http://www.abload.de/thumb/tridentpsc1300797gyzoc.jpg
Nice memory,you should get about 4 seconds lower with proper tweaks i think...
natu, nice ramz for sure, but no waza on this run?
only for test all my psc on LN? for some good 32m was the time to short.And my spi32m ist not the best.The rams can much more tighter as on pic by the secondary timmings.I have not all psc test more to come in the next one or two weeks
Nice run, mate, it was very impressive to see you and angoholic clock your memory! :up:Quote:
Originally Posted by natu
the 1400c7 were mixed :p
I know, I know, actually I meant your memory as in natu + angoholic! Sorry for the misleading post! :p:
yes the 1400c7 was great
Finally back up and running,only had quick run tonight will have to install fresh OS and waza.Here is a couple of screen shots they failed but was looking better then my best time
http://s15.postimg.org/8gn2ae7d7/5x1.png
http://s1.postimg.org/mi61fvw0f/image.png
haha "loop 20 passed, yes it's stable!" then BAM not convergent in sqr :shakes: I got worse time with cas 7 twcl 6 than 7/7 on my PSC, what's up with that?
Pretty sick RAM to run that settings :up:
poor bullant XD
http://media.tumblr.com/tumblr_m5x62n6twR1qco8bs.png
Hey mate,yeah so close and then fail ahah,did you try cas 7 ,tWCL 6 a few times just to make sure?Quote:
Originally Posted by Calathea
@ Splave, thanks for the hug bro I feel better now lol
Yes I am sure twcl 6 cas 7 was slower than 7/7. On the other hand I didn't run that on ln2 as you may know, only about -15 Celsius. Probably was too unstable?Quote:
Originally Posted by bullant
Yeah you could try colder,it may be a number of reasons why,I found when I run tWCL 6 it did help.Running colder mems will help with twCL stability tho,Quote:
Originally Posted by Calathea
Had the same sh** as i ran trcd at the limit. Then you get rewared with freezes at Loop 20 and then maybe "55" :rofl: Took hours..
Maybe next time :up:
Pretty good day today...
New os,new wazza and maximus extreme at it's best and still aircooled CPU
First got bumped by this one... One of my best tuned runs
http://www.youtube.com/watch?v=okQAm...ature=youtu.be
But never gave up...
crustytheclown - 6:16:312 - 49x102,1 - 1361MHz - 7-10-7-22-72-1 - Asus Maximus V Extreme - G.Skill Ripjaws X 2133c8 2x2GB (BBSE) - 1.92v - CPU air,Mem LN2
http://imageshack.us/a/img138/2863/screen002dr.jpg
http://imageshack.us/a/img593/6811/screen003ff.jpg
http://imageshack.us/a/img593/2763/screen004v.jpg
Sorry for the three screenshots but as you will see from the videos i was holding my mobile with one hand and didn't even have aida installed (duh)
Three videos,first one is interupted to plug my netbook to power,second is the rest of the run and last one is the aida run...
http://www.youtube.com/watch?v=QQNaC...ature=youtu.be
http://www.youtube.com/watch?v=hws9Z...ature=youtu.be
http://www.youtube.com/watch?v=VelJg...ature=youtu.be
Batch of the ripjaws? Impressive result
Sick run crusty :-)
That is savage power,well done!
great run crusty but your CPU is too high XD back it down .1
5004.52 ;) you will still beat me at 5001 :D
nice mems and IMC!
+- 3 mhz ... so lets calculate this trough
376,312*5005=1883441,56
1883441,56/5004=376,38720223820943245403677058353 equal 6min16.38
1883441,56/5003=376,46243453927643413951629022586 equal 6min16.46
1883441,56/5002=376,53769692123150739704118352659 equal 6min16.53
1883441,56/5001=376,61298940211957608478304339132 equal 6min16.61
1883441,56/5000=376,688312 equal 6min16.68
Nice one crusty :cool:
Awesome run crusty:up:
Can you run with +/- 3Ghz from 5000?