wooow :shocked: nice vcore mate :D
Printable View
wooow :shocked: nice vcore mate :D
Tried very hard, but cannot get hold of a golden chip, :(, but luckily atleast this chip doesnt have a low multi or mhz wall, :DQuote:
Originally Posted by Sauron_Vie
i guess then u r well prepared for the z-chipset :DQuote:
Originally Posted by thebanik
Just re-quoting myselfQuote:
Originally Posted by tiborrr
hey mate u have to install them away from the CPU if you got me, counting from CPU its 0,1,2,3 ok ? so u have to put them on 1 and 3Quote:
Originally Posted by Skakruk
cheers !
Sergio
well you say it all on your last words so its golden just need more vcore :DQuote:
Originally Posted by thebanik
congrats !
... and why is that?Quote:
Originally Posted by andressergio
AFAIK it doesn't matter for SB boards.
I suppose you have a point, but that is because those cards are too dam big and you cant use the 16x slot. If your cards will fit then it runs 16x in both slots.Quote:
Originally Posted by Dumo
First official BIOS (F2) for B3 boards on it's way.
i need new bios for my (arriving maby on 3 day) new ud4-b3.....Quote:
Originally Posted by stasio
Has anybody tested F2? What's new about it?
I just hope they will bring the B3 revision upto speed... as i am really dissapointed after exchanging my "old" one with the B3. To be more precise, my old one could get me to 4.5Ghz on Auto, while B3 crashes instantly!
"To be more precise" which mobo,all B3 series get F2 BIOS.Quote:
Originally Posted by MonkY
Btw,F3c is out for UD7-B3.
As this is the "Official P67A-UD7" thread, i thought there is no need for me to specify i am talking about P67A-UD7 and it's B3 "fixed" revision... right? :)Quote:
Originally Posted by stasio
Anybody have feedback about bios P67aud7.F8f?? Thoughts, Ocing?? Multi issues, vcore?? :shrug:
its the best bios for me, stopped those crazy reboot loops and runs as a champ, no issues at all i also put it as backup as F7e when comes as backup screw things and reboot loop if im benching and make a mistakeQuote:
Originally Posted by Expat GriZ
what problems yo have ?
Not really problems....looking to push bclk as after 6 chips still haven't found a really decent one and thought bclk might be the answer to OC heaven. You have PM...Thx for the response...will give this new bios a shot tonight. :up:Quote:
Originally Posted by andressergio
Quote:
Originally Posted by Expat GriZ
You know on P67 you cant push bclk like you could on X58?
Max Bclk that I have seen was 111
yea i think 111 is the new WR
2133Mhz 7-9-7-21-1T, vdimm 1.66v @ 5.1 GHZ PI 32m
http://img835.imageshack.us/img835/4...2011123440.png
Very nice Stasio
Man my b3 board sucks for oc'in,(compared to my b2)switched out to the f2 bios its the same or worse.
boot loops drive me mad even at defaults WTF?
If you have a setting to turn off ht dont you think it should not take 3 boots to do it?
nice nice stasio :up:Quote:
Originally Posted by stasio
Dont like hear that at all. I wish someone could tell us if there is a difference between B2 and B3 BIOS other than the naming. Is PLL overvoltage there at least?Quote:
Originally Posted by cowie
Dunno if I want to exchange my UD7 B2 to B3.
I can predict easily the oc specific behavior of my B2 by now:D
Ditto but my B3 will be here this week and now Im worried. I miss F7e already.
F8f is worse, much worse for me than F8X.......and yup....have to agree with you guys...now that I'm getting to know this board......will wait to exchange WHEN they finally are available in Europe...looks like the shops are getting some stock now.
EasyTune6 (Intel) B11.0309.1
http://download.gigabyte.us/FileList..._et6_intel.exe
yes it is still there,Quote:
Originally Posted by Eldonko
dont mean to scare you guys,just i think i got not the greatest sample?
I'm having issue with GTX580 (single and SLI) on B3. after installing driver (260.99 up to 270.32) it crashes when booting into windows. Running on PCIEx16_1 and 2. Win7 vanilla and SP1 same issue. Installed all drivers and apps from the provided DVD. hmmm...Quote:
Originally Posted by cowie
Do we need to do a fresh install of windows when we swap to a B3 board?
I presume all the drivers are the same as it's the same chipset, so i guess i can just image my SSD before i send the mobo back for replacement?
My new I2600K
#L050A853
testing it boots x49 no internal pll
http://img145.imageshack.us/img145/5...7trfc74spi.png
http://img835.imageshack.us/img835/5...7trfc74spi.png
http://img834.imageshack.us/img834/1...7trfc74eve.png
Thanks pol amazing chip :D:up:
wow i love this chip :D
http://img585.imageshack.us/img585/4...7trfc74spi.jpg
Uploaded with ImageShack.us
@ andressergio
that is sick, that means it should be good for 54x with pll enabled.
that is better than every chip I have tested, congrats on finding a good one my friend:up:
@ andressergio, wow that chips a bit easier on the volts my friend :up: have fun
Much better chip than the first one, andre. Very nice.
Quote:
Originally Posted by l0ud_sil3nc3
Quote:
Originally Posted by C-N
thanks guys :up::up::up: such a great an easy chio to OC goes x52 so easy that i still cant believe itQuote:
Originally Posted by Falkentyne
i started primming and its holding my mem at 1,65v 2133 7-10-7-27 seems to have also great IMC
http://img829.imageshack.us/img829/70/prime2z.jpg
cheers all
Sergio
Looking good Sergio!!!
When you get time... lets see some SuperPi 1M/32M at 54x. :up:Quote:
Originally Posted by andressergio
of courseee mate im primming now see i can lower more vcore also just needed to notch vdimm as bios F8F corrected overvolted mem so now as i have no middle value inbetween 1,66 and 1,68 i have to put this last and its going on perfectQuote:
Originally Posted by PolRoger
here the proof...
http://img193.imageshack.us/img193/8990/prime3s.jpg
http://img156.imageshack.us/img156/9540/p1080777.jpg
Thanks :up::up::up:
Cheers to all
Sergio
My new 24/7.....
http://img27.imageshack.us/img27/925...79721turbo.png
thats great stasio :up:Quote:
Originally Posted by stasio
Yeah,no BSOD or whatever with any application,only ambient temp +33C.:DQuote:
Originally Posted by andressergio
prime it i want to see that :DQuote:
Originally Posted by stasio
Have you moved over to the B3 revision yet Stasio?Quote:
Originally Posted by stasio
some benches using LLC1
http://img535.imageshack.us/img535/6752/p1080784u.jpg
http://img862.imageshack.us/img862/5401/sp1m.jpg
cheers all !
Sergio
and finally 5ghz prime !
http://img30.imageshack.us/img30/663...33c7prime2.jpg
http://img545.imageshack.us/img545/6...3c7everest.png
Uploaded with ImageShack.us
That's awesome andre.
My chip primes at 5 ghz with 1.404v load, and I didnt test it for more than one loop (15 minutes) of blend because temps started approaching 85C on the next loop, so I ended the test right there. My chip is 10C hotter than yours (LOW vid, though. 1.360 VID at 5 ghz, and 1.21 vid at 3.4 ghz) :shocked: I guess it's one of those "low vid high leakage" chips?
Bit confused though. Right after I flashed to F3C beta+clearing cmos, it reported 1.240 vid, but after setting my bios settings up, and same 3.4 ghz, and disabling spread spectrum, it reported 1.21.
This chip runs as hot as the other chip does at higher voltages, which is 1.390v VID @ 5 ghz and that needs 1.484v load for prime...(seems like small fft runs cooler, on the lower vid chip though?)
BTW press control F1 in bios to unhide a few options (spread spectrum should be something you always disable).
When are you going to exchange your board for a B3? B3 with latest beta bios should be a lot more stable for you...
thanks mate this is my first attempt of prime at 5ghz and went strong since started i will lower vcore and re tryQuote:
Originally Posted by Falkentyne
im on water though this chip is 1,245 vid my other was 1,255
thanks and good luck to ya :up:
Sergio
Oh...never knew you were on water. Thought it was air.
Here was just a very quick bench of my chip (I did last week after receiving it).
http://img132.imageshack.us/img132/6100/30256256.png
After the first loop (each loop batch is 15 minutes) self test finished, temps jumped to 85C for the next set, so I had to stop the test there.
I just did another quick prime blend today at 4.5 ghz and 1.236v load (1.265v bios with llc1) and it didn't bsod, so it didn't degrade (or break in) yet. 1.250v bios drops to 1.224v load and will BSOD so I bumped it up last week, and still good.
What voltage do you need for 4.5 ghz load?
And what about the B3 issue? Are you happy with your B2?
thats great mate :up:Quote:
Originally Posted by Falkentyne
im happy with my B2 for now its all runing like a charm tested my RAID0 connected to the ports that are to degrade and no changes at all
i never tried 4500 lol i just went to 4905 and 5005 lol
ahh i see you are on XP W7x64 SP1 take some volts more and also normal W7x64
what batch your chip ?
cheers mate :up:
It's a 3101A209, Costa Rica.
Not many of the 3 chips floating around...
B3 boards have much better cold booting, and can keep the bios setting after unplugs from PSU.
UD5 people have to upgrade to B3 (unless a B3 crossflash somehow works in B2) because LLC isn't working right on B2 Ud5's...LLC1 overshoots, LLC2 overshoots so far the comp reboots.
UD7's LLC seemed ok on B2's.
well my UD7 B2 with bios F8f does the same i have both as main and backup and i can unplug all day power and still keep settingsQuote:
Originally Posted by Falkentyne
LLC1 is much better
some quick 3DMVANTAGE
http://img192.imageshack.us/img192/4...3c7vantage.jpg
Uploaded with ImageShack.us
UD7 B3 is worse than B2, for 5.0GHz HT 1.52v bios set (1.56v load) LLC2 still giving me BSOD 124.
lol Gigabyte still let the POWER button up side down like B2. So far I didn't see any good thing except for the B3 stepping chipset.
Check the 3dmark scores. Someone said that F7x bios let them overclock farther on B2, but when they went to F8f, they can't overclock as far (like you have seen), but they got a significant 3dmark 06/11 score boost. And someone said that F1 BIOS on B3 board is based on last beta bios for B2. Can't confirm that, though...
sorry to hear that mate im forced to keep my B2 as i cant RMA now i live in South America and can't send the board back, but i love this oneQuote:
Originally Posted by owikh84
try to use LLC1 not LLC2 this last tends to peak much more and will bsod
F7x does not exist, was said on F8x but i tried all and compared and there's nothing on dif on points on 3dm, im using F8f as it solve perfect the boot loops and C3 stateQuote:
Originally Posted by Falkentyne
Sorry, I think I meant f7e.
I don't remember the bioses for UD7 since I have a UD5.
And I just had to fend off a clan of hackers in Crossfire, while this guy on my own team was talking trash to me. So I'm not exactly in a good mood. I was getting all the kills ....
ah ok yes UD F7e was the one but had that horrible reboot loops now fixed on F8f, also F8f needs a a notch on vdimm as other bios overvolted mem, as the UD7 doesnt have middle points jumps from 1,66 to 1,68 i have to use 1,68Quote:
Originally Posted by Falkentyne
Anyone on the B3 revision? Noticed that it needs a bit more bump on the vcore and the LLC's are behaving strangely.
Can you elaborate, by "strangely?"
On UD5 at least, LLC is mostly fixed on B3. Was completely broken on B2 (overshoots LLC1 or massive overshoots LLC2).
Nice CPU you found andressergio! Me jealous :D
From what I see, it now overshoots by alot on LLC2. Will do a few more test when I get the chance.Quote:
Can you elaborate, by "strangely?"
On UD5 at least, LLC is mostly fixed on B3. Was completely broken on B2 (overshoots LLC1 or massive overshoots LLC2).
UD7 B3 bios F3C and stock F2.
ok I'm running LLC1 1.6v bios set, 1.56v load, still BSOD 124 lol. On LLC2 as told before 1.52v bios 1.56v load BSOD 124.
B2 could stable at 1.47v bios LLC2, load 1.5v F8X. VTT 0.9v. Did i make a wrong decision by swapping to B3?
on Maximus this chip needed 1.5v bios set, 1.54v load but passed.
This is complicated.
If your chip is like my chip, that had somewhat high vid and ran cool, then it may have "degraded"/break in period. C_N told me that both of his chips needed 0.05v to 0.07v to run stable over time. Now, if a BIOS switch also addded on to this, for example, if change BIOS (B2 version f7e to B2 version f8x or f8f) required 0.05v more vcore--but gave higher 3dmark scores, then you combine cpu breakin+bios...and you get the answer.
Can you go into your BIOS, press CONTROL F1 please, then disable spread spectrum, and see if that helps? (Spread spectrum was unhidden in original B2 bios of UD7 and UD5, then later hidden).
Good idea on the cross flash but i dont dare to try out right now. Spread spectrum was set to disabled.Quote:
Originally Posted by Falkentyne
Cross flash wont work as the ID would be a mis-match, now some may get around that, but without BIOS modification users will be unable to cross flash.
thanks buddy :up:Quote:
Originally Posted by Lsdmeasap
I am having a weird issue. I could not use AHCI after flashing to f8f and had to use IDE. I had a crash that reverted the bios back to F4 and I can use AHCI no problem.
Just finished my B3 swap out. Went straight to F2 and not seeing much difference from my b2/f7e.
It still lets me auto to 4.6 @1.325. The low side 1.6 @ .972 is down from .994 on B/2.
I will push it tomorrow. give the IC Diamond a day to set.
My windows raid0 drives started right up and didn't bring a windows activation screen(i thought it would)
It did reinstall all of the sata and usb drivers when i started it up
You won't see a windows activation screen for three days.
If you go to the activation page, it may say that it needs activation.
Nice Chip Kid :up: havent been on so been missing all these nice clocksQuote:
Originally Posted by andressergio
Is CPU-Z reading your vcore properly?Quote:
Just finished my B3 swap out. Went straight to F2 and not seeing much difference from my b2/f7e.
It still lets me auto to 4.6 @1.325. The low side 1.6 @ .972 is down from .994 on B/2.
I will push it tomorrow. give the IC Diamond a day to set.
My windows raid0 drives started right up and didn't bring a windows activation screen(i thought it would)
It did reinstall all of the sata and usb drivers when i started it up
thanks friend love this chip boots so easy on 53x that scares me lolQuote:
Originally Posted by the_real_7
Gave up on 2600K's...5 chips, best one will do 54X ....but no bclk. Bought this little guy for fun and he's alright!! Quirky board but getting used to it.
No... I was looking for a update for thatQuote:
Originally Posted by maxxx
thats great man :up:Quote:
Originally Posted by Expat GriZ
Thanks Dude..... this was just a quick and nasty to see what it was capable of. Mem will run at 6 10 6 or 7 9 7 ....+ the little guy has a bit more in him......more testing when I get home. :DQuote:
Originally Posted by andressergio
i used bckl at my same stable 5005 volts to get 5100 boot from bios
http://img845.imageshack.us/img845/7541/5100bclk.png
Uploaded with ImageShack.us
nice job guys, that is some excellent work!!!!!
Anyone else having trouble with f8f and AHCI? F4 works fine but with f8f and AHCI I cannot boot into windows. I can only use IDE when using f8f as my bios.
thanks sin :up:Quote:
Originally Posted by sin0822
so weird man i flashed and using RAID but im sure that its workingQuote:
Originally Posted by aver
did you PM's stasio ?
cheers !
Sergio
@ 5400 moving only bclk LLC1
http://img810.imageshack.us/img810/5738/5400spi1m1.png
cheers !
Sergio
very nice:clap:Quote:
Originally Posted by andressergio
now run 32m:up:
thanks mate will do :up:Quote:
Originally Posted by l0ud_sil3nc3
Intel Core i7 2600K @ 4.99 GHz (4C/8T) = 104 X 48
Gigabyte P67A-UD7 B3 F2
2x2GB G.Skill RipjawsX F3-17000CL8D-4GBXMD 2133C8 @ 2218Mhz 8-9-8-1T
2x MSI GTX580 SLI, 930/4100Mhz
Corsair AX1200
http://i458.photobucket.com/albums/q...h84/104x48.jpg
** cpu-z reads vcore wrongly.
32m
http://i53.tinypic.com/spyzia.jpg
1m
http://i51.tinypic.com/jilyls.jpg
you just barely got me andressergio but you do have a very nice chip, I will have a better chip at the end of the week and I will keep pushing
now all I need is a UD7:toast:
thats great man :up: im not compiting just posting this nice chip as my other 2600K wasnt so greatQuote:
Originally Posted by l0ud_sil3nc3
edit* just realized you are on XP that takes a lot volts less to bench and boot u tried on W7x64 SP1 ?
cheers :up:
Sergio
I been having exact same problem with F87 and my AHCI ssd , when I change to ide , pc boots just fine wonder if stasio has any ideas on thisQuote:
Originally Posted by aver
some SPI32M on W7x64 SP1
http://img4.imageshack.us/img4/4769/5300spi32.png
cheers :up:
Sergio
Looking good there mate! Now I miss my B2....Quote:
some SPI32M on W7x64 SP1
thanks maxxx :up:Quote:
Originally Posted by maxxx
sad that B3 are acting so weird
Sergio do we know if the B3 is fudged up ? or is it bios at the moment . . . we need to find all all who have and see if anyway with B3 is not having any problems :rolleyes:Quote:
Originally Posted by andressergio
I'm not having any problems, but I'm on a UD5 with latest beta bios.
I have no idea exactly what problems you guys are referring to..? You mean you lost overclock?
I cant do crap with mine,me needs a good 2500k
chip will do 54x np but here i push blk
cpu air/gpu air
http://img828.imageshack.us/img828/6...sli0640430.jpg
you guys think on dice i can get more multi or blk?
like how are these chips on sub zero cooling with this board?
I can do much better with these boards on phase Cowie (Multi sometimes, and Bclk for sure), so Dice may help you a little bit if that is the only sub-zero cooling you can use.
Today tested 2 new 2600Ks on B3.
Both are giving BSOD 124/101 even 1.52v bios LLC2 at 5.0GHz (1.56v load).
I think B3 is bad, not the CPUs.
BSOD how? Idle/low load?
Don't use LLC2.
im just reading friend you have the testimonies here some lines down and pages back so other forumsQuote:
Originally Posted by the_real_7
cheers
Sergio
Quote:
Originally Posted by owikh84
maybe your settings ? can you show us your template maybe something your missing . llc2 is definitely not the way to go , you must be at something like 1.60 on load for 5.0