Intel 4.5GHz & 5GHz LinX Stable Club

Printable View

Show 100 post(s) from this thread on one page

01-03-2011, 09:20 PM
mattgmann

*Fixed

http://i921.photobucket.com/albums/a...0sreencap1.jpg

http://i921.photobucket.com/albums/a...screencap2.jpg

i7 920 @4620mhz (3849B018) water cooled
GA-EX58-UD5
3x2gb OCZ3P1600LV6GK
2x 4870
antec sg850
01-04-2011, 05:34 AM
zalbard

@ mattgmann:
Congrats on one of the golden chips, and good job following the rules - you're in! :up:

Edit: okay, I believe operation "Clean Up" is a success! Now to add the pretty stuff, such as colour coding. :yepp:
Houston, we have a problem, though! SteveRo, your very top amazing 5200.7MHz submission would not show a screenshot anymore. Please work on getting it back, sir, otherwise how I can't really prove it was there in the first place.
01-04-2011, 09:32 AM
Salamndar

OK here is mine, I have not tried to push further but I could try later :up:

http://img.photobucket.com/albums/v64/hmj2k3/4515.jpg

Info :
core i7 980x Batch# 3013A525
01-04-2011, 10:29 AM
deachus

Quote:

Originally Posted by Salamndar

OK here is mine, I have not tried to push further but I could try later :up:

http://img.photobucket.com/albums/v64/hmj2k3/4515.jpg

Info :
core i7 980x Batch# 3013A525

You may want to re-read the OP. You must set LinX to 21 or more runs and take the screenshot while LinX is still running after it completes the 20th run.;)
01-05-2011, 03:57 AM
RRunner

Core i7 980x Batch 3031A243
Vcore: 1.28v Idle / 1.29v Full Load
VTT: 1.25v / VDIMM: 1.61v
Gigabyte X58A-UD7
6G OCZ Platinum 1600 7-7-7-21 1T
Air Cooler - Megahalems + Ultrakaze´s
ROOM TEMP: 26.3 c

http://img710.imageshack.us/img710/5...inxfulllll.jpg

http://img405.imageshack.us/img405/3303/dscn5726x.jpg
01-05-2011, 04:00 AM
zalbard

Both of you, failure to read the OP...

Edit: updated my sig, hope people will realise now.
01-05-2011, 12:42 PM
cheapseats

cheapseats | C2D E8600 [2C] @ 4504.0MHz | 1.392 | ASUS Rampage Extreme | Air | Q820A606

vid 1.25
Noctua NH-U12P + 1x NF-P12 fan

here's mine for C2D category :)

http://i447.photobucket.com/albums/q...02_4GB_L20.gif

http://i447.photobucket.com/albums/q...02_4GB_L25.gif
01-05-2011, 02:31 PM
C-N

Please sir may I play in your club :)

Think I got the submission right.... I'll run it again if I've missed something

Air cooling 14oC ambient 1 x medium speed 120mm fan on Megahalems
Gigabyte GA-P67A-UD5
i5 2500K L041B517
OCZ3P2000C8LV4GK
HD6950
OCZ/Turbo Cool 1200W PSU

http://i106.photobucket.com/albums/m...66-797301T.png
01-05-2011, 02:35 PM
andressergio

Quote:

Originally Posted by C-N

Please sir may I play in your club :)

Think I got the submission right.... I'll run it again if I've missed something

Air cooling 14oC ambient 1 x medium speed 120mm fan on Megahalems
Gigabyte GA-P67A-UD5
i5 2500K L041B517
OCZ3P2000C8LV4GK
HD6950
OCZ/Turbo Cool 1200W PSU

http://i106.photobucket.com/albums/m...66-797301T.png

C-N thats amazing enjoy :up:
01-05-2011, 03:25 PM
PolRoger

Quote:

Originally Posted by C-N

Please sir may I play in your club :)

Think I got the submission right.... I'll run it again if I've missed something

Air cooling 14oC ambient 1 x medium speed 120mm fan on Megahalems
Gigabyte GA-P67A-UD5
i5 2500K L041B517
OCZ3P2000C8LV4GK
HD6950
OCZ/Turbo Cool 1200W PSU

Nice job C-N... with just under 1.45v! I'm looking forward to more SB submissions.
01-05-2011, 03:25 PM
C-N

Quote:

Originally Posted by andressergio

C-N thats amazing enjoy :up:

Thanks guys, SB :rocker:
01-05-2011, 08:59 PM
tool_462

Sexy C-N!

@Zalbard: Going to start a *new* 5Ghz club for SB?
01-06-2011, 11:30 AM
Salamndar

Ok, one more time :shakes:

Here you go :

http://img.photobucket.com/albums/v64/hmj2k3/4546.jpg
01-06-2011, 11:03 PM
Andrea deluxe

edit
01-07-2011, 12:18 AM
c22

Read the rules.

1. 1024 mb used in linx out of 8 GB. Are you kidding me?
2. Who cares about cinebench.
01-07-2011, 12:25 AM
Andrea deluxe

Quote:

Originally Posted by totalz

Read the rules.

1. 1024 mb used in linx out of 8 GB. Are you kidding me?
2. Who cares about cinebench.

sorry.

now edit.
01-09-2011, 09:27 AM
twirlywhirly555

First OC , I think setting are correct i did select the "all" for memory but not sure if i did it , 4Gb is installed ,
MB is a gigabyte H55N-USB3 , CPU (I3-560) is water Cooled , If Somethings wrong i will redo the Test :) .
Batch # L013B634
01-09-2011, 01:31 PM
Vinas

Intel Core i7 860 CPU
full batch number: L925B479
motherboard: Asus Maximus III Gene rev 1.00 (BIOS version 2001)
cooling: water; Magicool 480mm rad, Apogee XT block, Panworld 40px pump

It took me a while (I remember when this thread was new), but I finally got my i7 860 to clock 4.5GHz stable with the help of a mb BIOS upgrade! :clap:

Validation: http://valid.canardpc.com/show_oc.php?id=1584844

http://i279.photobucket.com/albums/k...5GHzclubSS.png
01-11-2011, 08:52 PM
Shadow0001

Had mine ready,but i can't post it since i only did 20 runs rather than 21,even though it took 90 mins to complete since i was using a 5 GB memory space,and yes,i do have even more memory installed in the system(12GB),but i'm sure as hell not looking at LinX for 3 hours for a 21 pass run using all 12 GB....:p:
01-12-2011, 11:00 PM
SBB

Well .... it's very hot ... but it's the fastest yet :D

http://i56.tinypic.com/b7xgso.png
01-13-2011, 12:13 AM
MaddMuppet

So is there going to be a 5Ghz thread now all these SB chips seem to be able to do that on air. Almost makes this thread out of date. :rofl:
01-13-2011, 12:26 AM
SBB

Quote:

Originally Posted by MaddMuppet

So is there going to be a 5Ghz thread now all these SB chips seem to be able to do that on air. Almost makes this thread out of date. :rofl:

Read the original post :rolleyes:
01-13-2011, 01:38 AM
Leeghoofd

Quote:

Originally Posted by MaddMuppet

So is there going to be a 5Ghz thread now all these SB chips seem to be able to do that on air. Almost makes this thread out of date. :rofl:

Believe me they all won't do 5ghz :p at least not on air
01-13-2011, 02:08 AM
Salamndar

Shouldn't the list in the OP be updated already!
01-13-2011, 02:52 AM
Church

So if 4.5 was challenge for old i7s, and SB gets 5 on Air, what clocks would be challenge for SB? 5.2? 5.5? And foremost - should it be in separate thread/club? :)
01-13-2011, 05:59 AM
zalbard

Quote:

Originally Posted by churchy

So if 4.5 was challenge for old i7s, and SB gets 5 on Air, what clocks would be challenge for SB? 5.2? 5.5? And foremost - should it be in separate thread/club? :)

Some people got to 4.5GHz using air cooling before SB.
I think 5GHz is fine, really. I mean, look at vCore, it's borderline dangerous 24/7 (and semi-typical for benching).

By the way, a few people killed or degraded SBs already on these forums using 1.5-1.6V. So watch out, people.

P.S. Not updating the OP yet. Nothing wrong with the latest submissions from what I've seen, though.
01-13-2011, 06:25 AM
PolRoger

Quote:

Originally Posted by Leeghoofd

Believe me they all won't do 5ghz :p at least not on air

I agree it is still early with the release of these chips. The more average and below average ones are out there.

Quote:

Originally Posted by zalbard

Some people got to 4.5GHz using air cooling before SB.
I think 5GHz is fine, really. I mean, look at vCore, it's borderline dangerous 24/7 (and semi-typical for benching).

Time will tell how well these SB chips scale at 1.5+v vcore load and if they are durable enough to handle one to two hours of LinX stress at these high volts on air/water (1.45/1.475/1.50+ load).
01-14-2011, 05:26 PM
wibujo

My first try @ 4.64GHz. Had to pull 12 Gigs of RAM to speed things up a little.
Intel 980X Batch# 3020A431
Gigabyte GA-X58A-UD9 F5i
Water Cooled

http://img837.imageshack.us/img837/2397/464ghztest.png
By wibujo at 2011-01-14

http://img42.imageshack.us/img42/3039/464test.png
By wibujo at 2011-01-14
01-16-2011, 09:21 AM
crossg

Quote:

Originally Posted by wibujo

My first try @ 4.64GHz. Had to pull 12 Gigs of RAM to speed things up a little.
Intel 980X Batch# 3020A431
Gigabyte GA-X58A-UD9 F5i
Water Cooled

If I could get LinX working I may be able to join this tread. Have read the readme and all the settings look right but it will not start stressing. Also wont stop when the stop button is clicked, have to exit from the file menu. Missing something simple I bet? Sorry for drifting off the main topic.

Edit LinX 0.6.3 works 0.6.4 doesn't.
01-16-2011, 03:22 PM
crossg

i7 980X @ 4.538 Ghz. Batch 3036C076.
Asus Rampage III Formula. Bios 505.
Cooling Air.
Vcore 1.448v.

Squeaked in under the wire. This 980X does not want to go 4.6.

http://img836.imageshack.us/img836/1746/45980x.th.jpg
01-16-2011, 03:23 PM
nolonger

Wow! This thread has been flooded with SB!
01-16-2011, 04:12 PM
Erklat

Quote:

Originally Posted by churchy

So if 4.5 was challenge for old i7s, and SB gets 5 on Air, what clocks would be challenge for SB? 5.2? 5.5? And foremost - should it be in separate thread/club? :)

I agree. No point in flooding the thread with the scores we all now are easily achievable. The thread should be renamed though to something like '4.5ghz >=45nm club' or something like that since 980x is 32nm too.
01-16-2011, 04:21 PM
Leeghoofd

Quote:

Originally Posted by churchy

So if 4.5 was challenge for old i7s, and SB gets 5 on Air, what clocks would be challenge for SB? 5.2? 5.5? And foremost - should it be in separate thread/club? :)

I already got 2 Sandies (2500K) here that won't do 4.5 on air, heck not even 4.3 for one...

But usually you won't find ayone reporting this here :D

Its not all that sunny as it looks...
01-16-2011, 04:31 PM
nolonger

Same batch? Could you post the batch numbers and motherboard here please?
01-16-2011, 04:32 PM
Sam_oslo

Quote:

Originally Posted by Leeghoofd

I already got 2 Sandies (2500K) here that won't do 4.5 on air, heck not even 4.3 for one...

But usually you won't find ayone reporting this here :D

Its not all that sunny as it looks...

That's not typical for SB, but you are right the results may vary depending on the batch#, and you will probably get better OC when maturing BIOSes and MBs, after a little while.

The 5.5GHz would be a good challenge (and a exclusive) SB-club, otherwise it may get crowded fast. It should get it's own thread too.
01-16-2011, 11:47 PM
miahallen

Sam...Zalbard has alread updated the OP to require 5GHz+ for SB :up:
01-17-2011, 12:14 AM
Leeghoofd

Quote:

Originally Posted by nolonger

Same batch? Could you post the batch numbers and motherboard here please?

baddest batch till now :p

My Dlx board easily goes to 4.8 with the 2600K, but it gets far too hot when stressing for my taste( 85°C ). Benched with the same board at 5.2Ghz with other CPUs... These 2 CPUs are real duds. I really hope that if someone else gets that batch, he would be more lucky. Luckily the buyers only want 4ghz stable :up: Will test them on the GB mobo this week...
01-17-2011, 04:15 AM
nolonger

Quote:

Originally Posted by Leeghoofd

baddest batch till now :p

My Dlx board easily goes to 4.8 with the 2600K, but it gets far too hot when stressing for my taste( 85°C ). Benched with the same board at 5.2Ghz with other CPUs... These 2 CPUs are real duds. I really hope that if someone else gets that batch, he would be more lucky. Luckily the buyers only want 4ghz stable :up: Will test them on the GB mobo this week...

Thanks. I'll make sure to watch out for those CPU's.
01-17-2011, 02:39 PM
KURTZ

http://img823.imageshack.us/img823/9216/5000a.th.jpg

Uploaded with ImageShack.us

5K!
01-17-2011, 02:44 PM
zalbard

Quote:

Originally Posted by KURTZ

http://img823.imageshack.us/img823/9216/5000a.th.jpg

Uploaded with ImageShack.us

5K!

Very nice! Great vCore, also! Could you please some give more info about your system as requested in the OP, though?
01-17-2011, 02:52 PM
KURTZ

Quote:

Originally Posted by zalbard

Very nice! Great vCore, also! Could you please some give more info about your system as requested in the OP, though?

sure :)

Asus P8P67
Exceleram 1600mhz
SSD Crucial C300
GTX 260
Water Cooled (obviously)

need something more? :)
01-17-2011, 03:29 PM
zalbard

Quote:

Originally Posted by KURTZ

sure :)

Asus P8P67
Exceleram 1600mhz
SSD Crucial C300
GTX 260
Water Cooled (obviously)

need something more? :)

CPU batch # if you know it (it can be found both on the chip and on the box, perhaps you still have the box lying around?).
Not a must, though. :)
01-17-2011, 03:52 PM
KURTZ

Quote:

Originally Posted by zalbard

CPU batch # if you know it (it can be found both on the chip and on the box, perhaps you still have the box lying around?).
Not a must, though. :)

mate, it's a sample :)

anyway i got huge troubles with my mainboard ... it goes every time in over voltage protection (i've already disabled the anti surge protection) ... maybe it's the beta bios that needs to be fixed ...

http://img69.imageshack.us/img69/411/5200pi.th.jpg

Uploaded with ImageShack.us
01-19-2011, 03:18 AM
sniper_sung

sniper_sung | Core i3 540 [2C 2T] @ 4508.5MHz | 1.408 | Gigabyte H55N-USB3 | Corsair H50 | L024B960

http://img404.imageshack.us/img404/6341/capturedfd.jpg
01-20-2011, 03:20 AM
bro20000

4.5Ghz LinX Stable 1.2v Bios 1.23v Full load! Hope next bios sorts out VDroop!

http://img689.imageshack.us/img689/1...cas7lowv12.png
01-20-2011, 03:26 AM
R37ribution

Quote:

Originally Posted by bro20000

4.5Ghz LinX Stable 1.2v Bios 1.23v Full load! Hope next bios sorts out VDroop!

You realize you have to have 20x LinX stable @ 5Ghz or higher with SB right?
01-20-2011, 03:45 AM
bro20000

Windows Supreme custom made with SP1 Build in!
Here a 5Ghz 1.35v LinX stable and Intelburn stable using all the memory have got and the higest setting!

http://img834.imageshack.us/img834/6...61tlinx135.png
01-20-2011, 04:06 AM
SteveRo

bro20k - nice work! batch? cpu cooling is water?
01-20-2011, 04:11 AM
bro20000

Batch is L040B307 on water! Soon be on chilled water hoping for 1.4v 5.2Ghz
01-20-2011, 11:19 AM
skeyo

Here is mine 5.1GHz; 1.48v; batch # L038A660; Cooling XSPC Rasa RX360 with GT15's; Mobo UD7 bios F7d
http://img43.imageshack.us/img43/232/51ghz.jpg
01-20-2011, 12:21 PM
ProStreetCamaro

Quote:

Originally Posted by bro20000

Windows Supreme custom made with SP1 Build in!
Here a 5Ghz 1.35v LinX stable and Intelburn stable using all the memory have got and the higest setting!

1.Nice job advertising you are running pirated illegal version of windows. :clap: Just messing with you I don't really care just not sure I would advertise it on a public forum.

2. Turn hyperthreading off because LinX does not stress the cpu correctly with it turned on.
01-20-2011, 12:28 PM
skeyo

@ProStreetCamaro
How do you know that is pirated ?
01-20-2011, 01:26 PM
tool_462

Quote:

Originally Posted by skeyo

@ProStreetCamaro
How do you know that is pirated ?

Assumed I guess :confused:

Using RT 7 Lite on a retail copy you own isn't pirating iirc. Not saying that is what the poster did, but it is as likely as the other option.
01-20-2011, 01:32 PM
Andrea deluxe

Quote:

Originally Posted by skeyo

Here is mine 5.1GHz; 1.48v; batch # L038A660; Cooling XSPC Rasa RX360 with GT15's; Mobo UD7 bios F7d
http://img43.imageshack.us/img43/232/51ghz.jpg

qpi/vtt help much?????

please... im unstable at 5000mhz.. with v-core only.....
01-20-2011, 01:44 PM
ProStreetCamaro

Quote:

Originally Posted by skeyo

@ProStreetCamaro
How do you know that is pirated ?

I don't know for sure just a hunch I guess. :shrug:

http://www.tinydl.com/software/10592...2011multi.html
01-20-2011, 02:31 PM
bro20000

Its not pirated am using my own cd key!
01-20-2011, 06:02 PM
skeyo

@Andrea deluxe
Helped a bit my LLC is lvl 1.
01-21-2011, 11:19 AM
OLDcomer

OLDcomer | C2Q Q9650 [4C] @ 4707MHz | 1.424 | Gigabyte GA-EP45-UDP rev. 1.0 | SS | L826B006

http://img217.imageshack.us/img217/2731/4700linx.th.jpg
01-22-2011, 09:17 AM
st0ned

I hope I wont stay out for 3.3Mhz :ROTF:

i7 2600k - 5Ghz - 1.425v @Bios

http://img25.imageshack.us/img25/3714/5ghz.jpg
01-22-2011, 10:21 AM
zalbard

Quote:

Originally Posted by OLDcomer

OLDcomer | C2Q Q9650 [4C] @ 4707MHz | 1.424 | Gigabyte GA-EP45-UDP rev. 1.0 | SS | L826B006

http://img217.imageshack.us/img217/2731/4700linx.th.jpg

VERY impressive for a C2Q! Looks like a golden chip! Congrats! :D

Quote:

Originally Posted by st0ned

I hope I wont stay out for 3.3Mhz :ROTF:

Hmmm... Well, it's OK, you're in, but you should play some more, I am sure there's still juice left in your chip! :up:
Also, please pay attention to the OP's requirements. Did some forum searching for you... ASUS P8P67 Evo, Air, L039B470 - correct?
01-23-2011, 07:07 AM
zalbard

All of the entries that are valid have been added to the OP. Welcome, and enjoy. :up:

Quote:

Originally Posted by SBB

Well .... it's very hot ... but it's the fastest yet :D

You, sir, got the golden cup - well done! :D
01-23-2011, 07:43 AM
skeyo

I'll try to push mine a bit more maybe 5.3 4c/4t :p
01-23-2011, 07:59 AM
C-N

Quote:

Originally Posted by SBB

Well .... it's very hot ... but it's the fastest yet :D

Quote:

Originally Posted by skeyo

I'll try to push mine a bit more maybe 5.3 4c/4t :p

Might have to put my 2500K back in if you can top this :D

http://www.xtremesystems.org/forums/...&postcount=258

Great chip btw :up:
01-23-2011, 08:25 AM
zalbard

Quote:

Originally Posted by C-N

Might have to put my 2500K back in if you can top this :D

http://www.xtremesystems.org/forums/...&postcount=258

You should repost these here. ;)
Otherwise it doesn't count. :p:
01-23-2011, 08:36 AM
C-N

Quote:

Originally Posted by zalbard

You should repost these here. ;)
Otherwise it doesn't count. :p:

I could but I figure as SP1 is now out & I am now using it I don't really count them as entry's... sure they were all run before SP1 went gold so made the criteria of the day but I bet I couldn't pull 5.3GHz on air!!! with AVX.

I know I've said it before but great club :up:
01-23-2011, 01:12 PM
SteveRo

Quote:

Originally Posted by zalbard

@ mattgmann:
Congrats on one of the golden chips, and good job following the rules - you're in! :up:

Edit: okay, I believe operation "Clean Up" is a success! Now to add the pretty stuff, such as colour coding. :yepp:
Houston, we have a problem, though! SteveRo, your very top amazing 5200.7MHz submission would not show a screenshot anymore. Please work on getting it back, sir, otherwise how I can't really prove it was there in the first place.

I think it is working now, nothing I did by the way, also below -

http://img824.imageshack.us/img824/4...stable5200.png
01-23-2011, 01:18 PM
SteveRo

Quote:

Originally Posted by SBB

Well .... it's very hot ... but it's the fastest yet :D

http://i56.tinypic.com/b7xgso.png

well done, congrats, excellent clock!
SB should add several to the club but your score might stay on top for a while.
01-23-2011, 01:23 PM
zalbard

Quote:

Originally Posted by SteveRo

I think it is working now, nothing I did by the way, also below -

http://img824.imageshack.us/img824/4...stable5200.png

Yep, weird...
Checked it earlier today and it worked. Must've been some issue with imageshack.
01-23-2011, 01:42 PM
Ace.

edit next time
01-23-2011, 01:47 PM
zalbard

Quote:

Originally Posted by Ace.

2600k

http://www.abload.de/thumb/52ghz1.524vcoreaces7oy.jpg

Install SP1 if you haven't and fire up LinX.
01-23-2011, 01:54 PM
Ace.

Linx needs less Vcore @the new Prime 26.4 so i will do and edit my Post
01-23-2011, 01:56 PM
zalbard

LinX uses AVX with Win7 SP1 installed (use the version from the OP). Prime doesn't. Watch your temps skyrocket...
01-23-2011, 02:22 PM
C-N

Quote:

Originally Posted by Ace.

Ace | Core i7 2600K [4C 4T] @ 5201.8MHz | 1.524 | Gigabyte P67A-UD5 | Water | L042B074

http://www.abload.de/thumb/52ghz1.524vcoreaces7oy.jpg

Awesome clock buddy :up:

You may be interested to read the bottom of this post

http://www.xtremesystems.org/forums/...&postcount=415
01-23-2011, 04:36 PM
C-N

i7 2600K @ 5.2GHz HT On SP1

i7 2600K @ 5.2GHz HT On Windows 7 64-Bit SP1

Air cooling 12oC ambient 1 x High speed 120mm fan on Megahalems
Gigabyte GA-P67A-UD5
i7 2600K L040B307
OCZ3P2000C8LV4GK
HD3870x2
OCZ/Turbo Cool 1200W PSU

http://i106.photobucket.com/albums/m...3ETVoltage.png
01-23-2011, 09:47 PM
cky2k6

My i7 920 3946A169 under water with 1.4375v set in bios.
http://i.imgur.com/X91my.jpg
01-24-2011, 11:44 AM
zalbard

Quote:

Originally Posted by C-N

i7 2600K @ 5.2GHz HT On Windows 7 64-Bit SP1

You just had to do it, didn't you?! :D
Well, that's very impressive! Using SP1 on air! Great chip! :up:

Quote:

Originally Posted by cky2k6

My i7 920 3946A169 under water with 1.4375v set in bios.
http://i.imgur.com/X91my.jpg

Please red the rules once again, mate. :)
01-24-2011, 04:18 PM
cky2k6

My i7 920 3946A169 under water with 1.4375v set in bios.
http://i.imgur.com/D3IKE.jpg
01-24-2011, 07:06 PM
crossg

Can I add my i7 2600K @ 5.0 Ghz.:)
Batch L038A660
Asus P8P67 Deluxe. Bios 1253.
Cooling Air.
Vcore 1.416v.
1.405 set in bios.
Chip may go higher but max temp on air.
4C4T SP1.
@ C-N nice clocks. I don't have the b#lls for that kind of voltage.
01-24-2011, 09:49 PM
Shadow0001

I'm in the club if i didn't forget any of the rules....:D

http://i765.photobucket.com/albums/x...passstable.png

Cooled on water,using 1.504 volts under load at 4.56Ghz for the CPU,and the motherboard is a Gigabyte X58 UD5(revision 1.0).....
01-25-2011, 01:36 AM
C-N

Quote:

Originally Posted by zalbard

You just had to do it, didn't you?! :D
Well, that's very impressive! Using SP1 on air! Great chip! :up:

He he... I just get carried away :D

Quote:

Originally Posted by crossg

@ C-N nice clocks. I don't have the b#lls for that kind of voltage.

LOL me neither I just ignore it.... pretend its not real!!!!

Seriously though how many Intel chips have you ever blown up? I think if the chip still scales then its happy to do it but ye its pushing air a bit.
01-25-2011, 09:03 AM
PolRoger

Quote:

Originally Posted by C-N

i7 2600K @ 5.2GHz HT On Windows 7 64-Bit SP1

Air cooling 12oC ambient 1 x High speed 120mm fan on Megahalems
Gigabyte GA-P67A-UD5
i7 2600K L040B307
OCZ3P2000C8LV4GK
HD3870x2
OCZ/Turbo Cool 1200W PSU

Very strong chip C-N!! :up: Congrats!
01-25-2011, 03:23 PM
JoeBar

A very late 920 comer... :D

http://img198.imageshack.us/img198/2...inxstable3.jpg

One more a bit late and outside the rules... :p:

http://img87.imageshack.us/img87/954...stable4.th.jpg

System in sig.
01-25-2011, 06:43 PM
the_real_7

Joining the club a second time :D
2600k Batch L040B705
Gigabyte GA-P67A-UD7
Water Cooling
Vcore 1.391v.
1.420 set in bios.
Dont feel the need to go higher than 5.0 . . Ran LinX 2 X 20 times

http://i84.photobucket.com/albums/k7...19-14-48PM.png
01-25-2011, 07:04 PM
OC Nub

Quote:

Originally Posted by the_real_7

Joining the club a second time :D
2600k Batch L040B705
Gigabyte GA-P67A-UD7
Water Cooling
Vcore 1.391v.
1.420 set in bios.
Dont feel the need to go higher than 5.0

http://i84.photobucket.com/albums/k7...19-14-48PM.png

Congrats!!
Nice chip man, good job!:up:
01-26-2011, 01:36 AM
scum

Scum | Core i7 980X [6C 6T] @ 4510 MHz | 1.4 | ASUS Rampage III Extreme | Air| 3031A242

http://img232.imageshack.us/img232/8561/linx45.png
01-26-2011, 02:57 AM
GunGod

SB join the club :)

Hey ya all you crazy Sandy biтches, leave our club and get your own 5.5Ghz Linx Stable!!! ............... Just kiddin :welcome: nice results. :up: maybe next update will be for 6ghz stable :rolleyes:
01-26-2011, 10:59 AM
the_real_7

Quote:

Originally Posted by OC Nub

Congrats!!
Nice chip man, good job!:up:

Thanks Nub :up: yes she is maybe when i reload thius week ill go higher ,Im still working on I7 920 load ack
01-26-2011, 11:05 AM
andressergio

Quote:

Originally Posted by the_real_7

Joining the club a second time :D
2600k Batch L040B705
Gigabyte GA-P67A-UD7
Water Cooling
Vcore 1.391v.
1.420 set in bios.
Dont feel the need to go higher than 5.0 . . Ran LinX 2 X 20 times

http://i84.photobucket.com/albums/k7...19-14-48PM.png

congrats my friend thats so :shocked: low volts :up::up::up:

hope mine gets closer :D
01-27-2011, 09:35 AM
thobel

Asus Rampage 3 Extreme -Water
980x Water 1.475v
Still tweeking settings

http://i939.photobucket.com/albums/a...bel/Linx45.jpg
01-27-2011, 09:45 AM
The_Game

I was close to successful run but the NB overheated :)(it was on stock cooling). That was only 1 try didn't try for lower VCore(1.504 load) or higher frequency(cause of the high FSB). I hope to complete it successfully next time when I have more time to play :P.
http://img713.imageshack.us/img713/6589/linxfail.jpg
01-27-2011, 10:07 AM
donmarkoni

Quote:

Originally Posted by thobel

Asus Rampage 3 Extreme -Water
980x Water 1.475v
Still tweeking settings

http://i939.photobucket.com/albums/a...bel/Linx45.jpg

Crop your screenshot and use higher resolution.
Good job, though. :up:

Quote:

Originally Posted by The_Game

I was close to successful run but the NB overheated :)(it was on stock cooling). That was only 1 try didn't try for lower VCore(1.504 load) or higher frequency(cause of the high FSB). I hope to complete it successfully next time when I have more time to play :P.
http://img713.imageshack.us/img713/6589/linxfail.jpg

:eek: Try again! Use bigger fan, open window, or something. It's amazing speed! :clap: Sandy Bridge stands ashamed. :p:
01-27-2011, 10:14 AM
thobel

Quote:

Originally Posted by donmarkoni

Crop your screenshot and use higher resolution.
Good job, though. :up:

:eek: Try again! Use bigger fan, open window, or something. It's amazing speed! :clap: Sandy Bridge stands ashamed. :p:

I took the screenshot at 2560x1600 but resized it as per instructions.

side not what process do you guys use with screenshots?

I Ctrl print screen
paste into mspain save as jpg
upload to photobucket.
01-27-2011, 10:18 AM
donmarkoni

Quote:

Originally Posted by thobel

I took the screenshot at 2560x1600 but resized it as per instructions.

side not what process do you guys use with screenshots?

I Ctrl print screen
paste into mspain save as jpg
upload to photobucket.

That's it, but if you put all applications close together, take a screenshot, paste it to Paint and then crop it, you won't need to resize, just upload and post. :)
01-27-2011, 10:30 AM
zalbard

The OP has been updated! Good job, everyone, and welcome to the new members. :)

Quote:

Originally Posted by scum

Scum | Core i7 980X [6C 6T] @ 4510 MHz | 1.4 | ASUS Rampage III Extreme | Air| 3031A242

Great formatting. Please read the rules once again, though, LinX has to be running in order to join. :)

Quote:

Originally Posted by thobel

Asus Rampage 3 Extreme -Water
980x Water 1.475v
Still tweeking settings

Please read the rules, also. Added a big red part, hope it's gonna help avoid this. :up:

Quote:

Originally Posted by The_Game

I was close to successful run but the NB overheated :)(it was on stock cooling). That was only 1 try didn't try for lower VCore(1.504 load) or higher frequency(cause of the high FSB). I hope to complete it successfully next time when I have more time to play :P.

Holy cow, what kinda cooling are you running there?! :eek:

Quote:

Originally Posted by donmarkoni

That's it, but if you put all applications close together, take a screenshot, paste it to Paint and then crop it, you won't need to resize, just upload and post. :)

That's would be my suggestion, also. :up:
01-27-2011, 10:34 AM
thobel

Quote:

Originally Posted by zalbard

The OP has been updated! Good job, everyone, and welcome to the new members. :)

Great formatting. Please read the rules once again, though, LinX has to be running in order to join. :)

Please read the rules, also. Added a big red part, hope it's gonna help avoid this. :up:

Holy cow, what kinda cooling are you running there?! :eek:

That's would be my suggestion, also. :up:

Just wondering why does it need to be running? crap takes forver :)
01-27-2011, 10:42 AM
zalbard

Quote:

Originally Posted by thobel

Just wondering why does it need to be running? crap takes forver :)

You can run it at, say, 4.2GHz, let it finish, then use some utility (like CPU Tweaker) to OC it to 4.5GHz, and take a screenshot. Then claim that LinX is terrible at utilising HT, or whatever (hence low GFlops). Basically, an easy legitimacy check. :)
Just set it to 21 pass, and take a screenshot a couple of seconds after it's done with the 20th pass, job done! :up:
01-27-2011, 10:53 AM
thobel

Quote:

Originally Posted by zalbard

You can run it at, say, 4.2GHz, let it finish, then use some utility (like CPU Tweaker) to OC it to 4.5GHz, and take a screenshot. Then claim that LinX is terrible at utilising HT, or whatever (hence low GFlops). Basically, an easy legitimacy check. :)
Just set it to 21 pass, and take a screenshot a couple of seconds after it's done with the 20th pass, job done! :up:

ahh makes alot of sense except... why do people cheat at such stupid stuff :) now if you offered $100 for people who passed then maybe worth cheating and all :)
01-27-2011, 11:50 AM
The_Game

Quote:

Originally Posted by zalbard

Holy cow, what kinda cooling are you running there?! :eek:

Cascade @-115 :p:.
But the CPU is a golden one :D. Also can I post with 1 core? The first core of this CPU is ~200MHz better than the second one I think I can pass at 5.8 :D(if the board can do it of course).
01-27-2011, 11:58 AM
thobel

[QUOTE=thobel;4722836]Asus Rampage 3 Extreme -Water
980x Water 1.475v
Still tweeking settings

http://i939.photobucket.com/albums/a...el/linx451.jpg
01-27-2011, 12:04 PM
Leeghoofd

Quote:

Originally Posted by donmarkoni

It's amazing speed! :clap: Sandy Bridge stands ashamed. :p:

Nah, don't think so :p Is that under cascade ?

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 03:45 AM.

XtremeSystems