ASUS Maximus Formula SE

Printable View

Show 100 post(s) from this thread on one page

12-02-2007, 05:25 PM
safan80

Quote:

Originally Posted by pazza316

I just flashed to the 0903 bios and found things to be more stable at 1:1 Ratio. My fsb can clock much much further now also.

I find 3:5 to be more stable as well.
12-02-2007, 05:32 PM
sdumper

Anybody got a link to 0903? Pm me if you dont mind///
12-02-2007, 05:34 PM
safan80

Quote:

Originally Posted by sdumper

Anybody got a link to 0903? Pm me if you dont mind///

check my sig
12-02-2007, 05:35 PM
pazza316

Its available on the ASUS site now.

http://dlsvr03.asus.com/pub/ASUS/mb/...ula/MF0903.zip
12-02-2007, 05:35 PM
ElEctric_EyE

Quote:

Originally Posted by Talonman

Thanks for answering my question... :up:

Both sticks (2 x 2GB) will be installed in the mobo, before my Vista Ultimate x64 OS install.

I guess i'll take some of the users advice here, and use the white slots... ?? :)

I've not progressed to the stage yet where I am pushing memory settings, but I've read it actually affects RAM stability based on the slots you chose... Guess it's not meant to run serious OC on 8GB... Servers are meant for that action
12-02-2007, 05:48 PM
pazza316

I am not experiencing this stablilty problem depending on slots.

With 4gb 4 X1gb I can do DDR 1150 + With two sticks in either colour slots I can easily do DDR 1200 +. These are afew hours Orthos memory and quad 32 mb pi stable.
12-02-2007, 06:04 PM
sdumper

DAMN!!!!!

How do i get my old bios back 0903 is horrible and I get a message stating that " I cant flash to my previous bios because they are older...or something like that."

Whatever you do please steer clear of 0903!!!
12-02-2007, 06:07 PM
pazza316

0903 is working well here. To flash back use a flash drive and do it in EZ flash
12-02-2007, 06:15 PM
pazza316

Sdumper which bios did you have previously and why do you think 0903 is so bad? Just out of interest.
12-02-2007, 06:18 PM
leoftw

Quote:

Originally Posted by Grnfinger

My 450x8 settings OCCT and Prime stable

Extreme Tweaker
Ai Overclock Tuner : Manual
OC From CPU Level Up : AUTO
CPU Ratio Control : Manual
- Ratio CMOS Setting : 8
FSB Frequency : 450
FSB Strap to North Bridge : 400MHZ
PCI-E Frequency: 110
DRAM Frequency: DDR2-1199
DRAM Command Rate : 2T
DRAM Timing Control: Manual
CAS# Latency : 5
RAS# to CAS# Delay : 5
RAS# Precharge : 5
RAS# ActivateTime : 15
RAS# to RAS# Delay : AUTO
Row Refresh Cycle Time : AUTO
Write Recovery Time : AUTO
Read to Precharge Time : AUTO

Read to Write Delay (S/D) : AUTO
Write to Read Delay (S) : AUTO
Write to Read Delay (D) : AUTO
Read to Read Delay (S) : AUTO
Read to Read Delay (D) : AUTO
Write to Write Delay (S) : AUTO
Write to Write Delay (D) : AUTO
DRAM Static Read Control: Disabled
Ai Clock Twister : Strong
Transaction Booster : Disabled

CPU Voltage : 1.55
CPU PLL Voltage : 1.60
North Bridge Voltage : 1.55
DRAM Voltage : 2.20
FSB Termination Voltage : 1.50
South Bridge Voltage : 1.10
Loadline Calibration : Enabled
CPU GTL Reference : Auto
North Bridge GTL Reference : Auto
DDR2 Channel A REF Voltage : DDR2_REF
DDR2 Channel B REF Voltage : DDR2_REF
DDR2 Controller REF Voltage : DDR2_REF
SB 1.5V Voltage : 1.5

NB LED Selection : NB Volt
SB LED Selection : SB Volt
CPU LED Selection : CPU VOlt
Voltiminder LED : Disabled

CPU Spread Spectrum : Disabled
PCIE Spread Spectrum : Disabled

Advanced CPU Configuration
CPU Ratio Control : Manual
- Ratio CMOS Setting : 9
C1E Suppport : Disabled
CPU TM Function : Disabled
Vanderpool Technology : Disabled
Execute Disable Bit : Enabled
Max CPUID Value Limit : Disabled

USB Configuration
USB Functions: Enabled
Legacy USB Support : Enabled

That didn't work but probably because I'm on a early Bios and I haven't updated . Hopefully that changes when I get my flash drive today .
12-02-2007, 06:31 PM
safan80

2 Attachment(s)

here's my voltages on NB and ram. I used vista x64 in this run. I'm using the white ram slots. this bios I'm using is 0903. I'm doing 3.6Ghz 12x301 mem ratio 3:5 with mem speed at 501mhz
12-02-2007, 06:36 PM
Warboy

Quote:

Originally Posted by safan80

here's my voltages on NB and ram. I used vista x64 in this run. I'm using the white ram slots. this bios I'm using is 0903. I'm doing 3.6Ghz 12x301 mem ratio 3:5 with mem speed at 501mhz

Safan, Can you try to run 430x9 or higher and tell me what you get on those readings
12-02-2007, 06:39 PM
safan80

Quote:

Originally Posted by Warboy

Safan, Can you try to run 430x9 or higher and tell me what you get on those readings

my B3 can't run that high on the 9 multi.
12-02-2007, 06:42 PM
Warboy

Quote:

Originally Posted by safan80

my B3 can't run that high on the 9 multi.

aww, You should RMA it and get a G0
12-02-2007, 06:44 PM
safan80

Quote:

Originally Posted by Warboy

aww, You should RMA it and get a G0

forget G0 I want a yorkfield.
12-02-2007, 06:47 PM
Warboy

Quote:

Originally Posted by safan80

forget G0 I want a yorkfield.

Me too but Do You have 1200 dollars i can borrow? :rofl:
12-02-2007, 06:51 PM
Zucker2k

Quote:

Originally Posted by Warboy

Me too but Do You have 1200 dollars i can borrow? :rofl:

Or you could sell your liver and kidney. :D
12-02-2007, 06:53 PM
Zucker2k

@Warboy, which part of MI you at? East Lansing here.
12-02-2007, 07:00 PM
Warboy

Quote:

Originally Posted by Zucker2k

Or you could sell your liver and kidney. :D

I will sell one kidney and 1/3 my liver if i could get a nice price for them....:hm:

Quote:

Originally Posted by Zucker2k

@Warboy, which part of MI you at? East Lansing here.

Kzoo
12-02-2007, 07:07 PM
safan80

Quote:

Originally Posted by Warboy

Me too but Do You have 1200 dollars i can borrow? :rofl:

newegg Preferred account has No Payments for 12 Months over $1000 promotion.... guess what I did ;)
12-02-2007, 07:16 PM
leoftw

Quote:

Originally Posted by safan80

newegg Preferred account has No Payments for 12 Months over $1000 promotion.... get what I did ;)

LOL I don't even have 200$ in debt :P and thats on my gas card lol
12-02-2007, 07:22 PM
leoftw

hey I'm trying to run OCCT and I do get to run it but how do i see the results ?
12-02-2007, 07:53 PM
Zucker2k

Quote:

Originally Posted by safan80

newegg Preferred account has No Payments for 12 Months over $1000 promotion.... guess what I did ;)

Looking to play with some shiny new toys huh? Hope you have goodluck with that chip.
12-02-2007, 07:59 PM
sdumper

1 Attachment(s)

Quote:

Originally Posted by pazza316

Sdumper which bios did you have previously and why do you think 0903 is so bad? Just out of interest.

I ran both 0802 and 0901 at 5175 ghz and benched at 5.088 proof attached

I finally got it working but the damn thing is very picky. Still when I use the bios EZ Flash I cant flash back to 0901.

All of that said the 266 Strap is finally working and I was finally able to get is stable at 4.8ghz at 1.63vCore :( used to take 1.62...go figure.

So maybe i need to flash from a floppy boot...
12-02-2007, 08:12 PM
Warboy

Quote:

Originally Posted by safan80

newegg Preferred account has No Payments for 12 Months over $1000 promotion.... guess what I did ;)

I don't have credit, Do you wanna get me one too?

Show 100 post(s) from this thread on one page