XS HWBot Team

Quote:

---

Originally Posted by G.Foyle

Lol I'm embarassed with that score :) Yotomeczek ran it for sh*ts and giggles after we took the AM3 screenshot. It will be redone in proper OS with proper tweaks :)

---

Very good. :up:

Quote:

---

Originally Posted by G.Foyle

Lol I'm embarassed with that score :) Yotomeczek ran it for sh*ts and giggles after we took the AM3 screenshot. It will be redone in proper OS with proper tweaks :)

---

Hahaha, yeah, efficiency is not good, but I said strong clock speed anyway, and that is indeed pretty nice compared to other 990Xs. :p:

Guys, just wanna share some info...You can request sample here...http://www.chomerics.com/products/Th...se_650_660.htm

T660 and 670 seem to be really good with cold

cold? what temps? what cpu/gpu?

With AMD/LN2 non brittled....dunno the temp. since no cold bug and didn't use DT

full pot is full pot, amd cpu will do 6.3ghz-7ghz depending on tim, mount and skillz, cpu, mobo.

any results? comparisons from other tim?

pardon my inquiring mind.

No comparo with other tim..only used ceramique, T660 and zero therm all were ok.

Just try the free sample, they also have phase-change tim and thermal interface gap (a sheet which I tested with cold bugged cpu)

Thanks for the info, Dumo! :up:

Quote:

---

Originally Posted by Dumo

No comparo with other tim..only used ceramique, T660 and zero therm all were ok.

Just try the free sample, they also have phase-change tim and thermal interface gap (a sheet which I tested with cold bugged cpu)

---

really want to try this TIM... but it requires a name of business :( (assuming they wouldn't like it if an average consumer trys to get a free sample?) i'm in college, no business affiliation yet, should i just make one up?

put in your school info. laboratory experiments etc lol

i put my user name as my company name. they sent it to my apartment via ups. got my sample of T670 today, will test under ln2 tomorrow.

Quote:

---

Originally Posted by ZenEffect

i put my user name as my company name. they sent it to my apartment via ups. got my sample of T670 today, will test under ln2 tomorrow.

---

:up:

Awesome Zen. Before go cold, run it for a few so tim can expand with evap/base pot @ around 65C

I don't think my username will work :rofl:

Quote:

---

Originally Posted by ZenEffect

i put my user name as my company name. they sent it to my apartment via ups. got my sample of T670 today, will test under ln2 tomorrow.

---

Awesome... don't think my username will work either, but i made one up... just ordered :)

so i guess i should run it with just the hs on and without the chiller/fans on so it expands like dumo said... how long? 5 minutes?

use stock settings to warm up the paste, your chiller should indicate temps or it doesnt? no thermometer? pastes usually soften at 40-50c.

Quote:

---

Originally Posted by Hondacity

use stock settings to warm up the paste, your chiller should indicate temps or it doesnt? no thermometer? pastes usually soften at 40-50c.

---

it does indicate temperature, but it's the temp of the chiller not the ihs, (i'll let it sit so delta decreases)

thanks Hondacity :)

I just use the bios temps.

what did I miss? new thermal paste? I just use ceramic or that newegg paste that comes in a nail polish bottle you brush on. Chew turned me onto it last year and its all I use now.
http://www.newegg.com/Product/Produc...82E16835200060

another tip he showed me when insulating take a few balls of eraser about the size of pea and hit the backside of the board where the dimms are. There are a few holes you just plug up. They might seem small but that paste and the eraser dimm plug trick changed my life. Also instead of keeping isopropyl around and keep buying just get yourself a huge tank of paint thinner. Chew had it laying around the kitchen and I thought it was a slight fire hazard but he didnt blink an eye. He told me I should have one around for removing conformal spray/insulation and thermal paste.

hi to the team.
its been a while. Are you guys focused on a particular contest this month? its the end of the month. Whats the word? are you dudes making submissions?

has anyone ever got the pot mounted and poured a slight amount of alcohol in the bottom of the pot and lit it on fire to prime the paste before adding ln2? I just thought of it. Seems like a safe way to prime the paste without having the board on and frying the cpu before you actually bench? Good idea or bad idea?

just minutes ago

honda its just the hurricane bs on the east coast hub. 10 bux it will say out for delivery tomorrow.

"she" the "beech" left the ups_info_notice already, i was suppose to pick it up at the ups office.

but its lost.

im happy though i got the rams i was waiting for,

http://i24.photobucket.com/albums/c5...5/933a2041.gif


time to bench some celeries, after work tonight.

We're at 20500 points now, without any new submissions. Did xt0m join us yesterday?

@Hondacity: New RAM? :D

wow 20585pts for THE team :D

not sure when xtom joined, but welcome to the team anyways :D

yep 1800c7 1gb sticks :D

Yeah, but I'm not sure what to think about it, his Last Activity on XS was: 05-23-2011 09:46 PM.
Anyway, welcome to the team, Tom.

Some new RAM for the P5E? I bought some 2000C9 to play with recently ( and also some Mushkin 1066 and 1150 CL5 to keep me busy. :D )
Let me know what your 1800C7 can do.

ocz also released 1800c8 1gb sticks...i got those for cheap. they're inbound.

i'll need these rams as the rampage xtreme is way more efficient than the p5e3.

this is the first time in many days that i get home by 7pm...nuff time to pretest the rams. and maybe take pics too for the memory addicts :ROTF: