1.488v@3050mhz VPMW ;)
Printable View
1.488v@3050mhz VPMW ;)
865pe: You got amazing temps for 3050. Are you topless?
I'm afraid to ask what your idle temps are like.
cjoe
WOW, just WOW
Upgraded my water cooling, the chip from ben is now 39C full load @ 1.4v instead of 48+!
Just incredible. Not yet tested for further stability. :toast:
Now get that chip up here w/ the rest of the 3 Ghz, we need that crunching power :cow: :hammer:
Quote:
Originally Posted by CompGeek
Vcore maybe up to .05 or more that you think, might explain high load temp. Both of mine (170 VPMW) are 40c or less @ 3.05 Ghz, pair of GBHZ running rosetta ) :shrug:
(But yes, still great CPU :up: )
Quote:
Originally Posted by cjoe
2960 priming, 1.45v :)
pictures speak better than works :fact:
Well, im in windows @ 3000/1.5. If prime stable will post the pics. Didnt want to bother before 3000
40 minutes of prime so far :p:
You guys made me jealous, so I dropped the volterage to 1.49V from 1.51V and it passed Super Pi 32M Twin Run. :woot:
hi guys.
i wanna buy the OPteron 165 but the thing that makes me worry is the opteron 165 like the High FSB 1:1 with tight rams 2-2-2-5 ( BH5-UTT)
Until now all isee is ppl doing HIgh CPU but ram @ 200 @ 2-2-2-5 OR high FSB like 250 1:1 @ 2.5-3-3-8.
i want to confirm this
thanx for the help
http://s2.supload.com/thumbs/default/lidpopper.jpg
Thanks for the tip Grinch.
Picked up one of these babies at Ace hardware $1.29.
cjoe
You don't need 1:1. Its okay to use a divider with A64 chips (Opterons). Most people are running very high HTT with dividers becuase the performance of 1:1 vs divider is not that great.Quote:
Originally Posted by SNIPoR
cjoe
i know its ok to use 5:4 divider .... but thats not what i need to know..Quote:
Originally Posted by cjoe
all i need to Confirm is ok to run 250 Fsb @2-2-2-5-7 with the Opteron 165?? like lets say 9x250 fsb @ 2-2-2-5
iam worred about the Opterons may not work perfectly with Tights rams like BH5/UTT Ram (2-2-2-5) @ 250 FSB
Just in:
http://img60.imageshack.us/img60/655...ited4wc.th.jpg
Priming at 2.6 @ stock voltage :)
Quote:
Originally Posted by cjoe
np have you used it yet?:toast:
With this stepping don't loose your time....try 2.8 @ stock voltage first :p:Quote:
Originally Posted by macg
You got the exact same product as Grinch? Time for me to stop my Ace!:toast:Quote:
Originally Posted by cjoe
Congrats on getting that chip to over 3.0Ghz, keep cranking and let us know how high you can get it up to, I hope you like that 0550UPMW....as I told ya that chip kicks ass!! :D :DQuote:
Originally Posted by CompGeek
your guess is very close....I'm preparing for the Conroe ;) I had already got rid of all my spare dual cores and s939 motherboards, the Asus A8N32 and AD0 are gone too, for now I'm using my last chip Opty 148 on the Venus till the Conroe hit the street :DQuote:
Originally Posted by thunderstruck!
Hehe, I wanted that AD0. Did it go to ebay?Quote:
Originally Posted by ben805
not on ebay, the AD0 went to another forum member here, it was a very nice board...with swiftech BGA ram sinks on all the hotspot, I'd only used it couple times. :D :D
Yea, thanks ben :toast:
I can do Super PI 1M @ 3072mhz with the same voltage, then 3080 @ 1.55v, but I cant get over that at 1.575. Kinda wierd.
hmm that is great work guys 2.8 at 1.42...on air here modded xp-90...need to get my water cooling finished up...
it is topless 175 0540TPMW forget the rest...
Dragon
Not yet. Its my last resort if my CCB1E 0550 VPMW doesn't cool down in a week. I was very worried yesterday but idle temps have dropped 4C today.Quote:
Originally Posted by Grinch
cjoe