DFI final S939 Motherboard CFX3200 ATI RD580 results

Printable View

Show 100 post(s) from this thread on one page

06-02-2006, 12:53 PM
Counter CS

AMD64 x2 3800+ @ 3050Mhz 1.5v (CPU-Z show 1.47v)

http://valid.x86-secret.com/show_oc?id=97641

http://img245.imageshack.us/img245/2...0mhz14v6vl.jpg
06-02-2006, 06:48 PM
phi|os

Where did you get that stepping counter CS????!!!!!!
06-02-2006, 07:02 PM
Raybo

Quote:

Originally Posted by phi|os

Where did you get that stepping counter CS????!!!!!!

YEA, me too!

That is a sweet 3800 X2.

Stepping please?

:stick:
06-03-2006, 12:38 AM
Counter CS

Quote:

Originally Posted by Raybo

YEA, me too!

That is a sweet 3800 X2.

Stepping please?

:stick:

LOL the stepping is writed in the Screen Shot :fact: :slap:
You can buy it here => http://www.aquapc.com/loja/?id=46
But it´s only left 2 X2 3800+ with the same stepping.

And i can tell you that i have got to win desktop at 3100Mhz 1.55v :woot:
But thos mobo is tricky and it rebooted after i have take cpu-z validation.
But, CPU-z in not up to date and don´t let me validate :slapass:

Give me 2min and i will run Pi 1M at 3100Mhz .

My sistem is water cooled, and the win is not optimized for that :banana::banana::banana::banana: :D

BTW, those OCZ EB PC4000 Platinum are from a friend of mine, and he told me that they start giving artefact at +260Mhz.
But i don´t know how i don´t get no artefact at hall with 270Mhz, i think this mobo is cool for those chip CE-6 :toast: :clap:
I use the last Beta BIOS 23/05/2006, very good and heasy to set :woot:
06-03-2006, 01:06 AM
Counter CS

:banana: 3100mhz 1.6v :toast: http://valid.x86-secret.com/show_oc?id=97767 :woot:

Wish i have some extreme cooling :slobber:
06-03-2006, 01:15 AM
eva2000

Quote:

Originally Posted by Counter CS

AMD64 x2 3800+ @ 3050Mhz 1.5v (CPU-Z show 1.47v)

http://valid.x86-secret.com/show_oc?id=97641

similar stepping/batch X2 3800+ here doing 3200mhz on water http://i4memory.com/showthread.php?t=2733 !
06-03-2006, 03:25 AM
Counter CS

:eek: http://valid.x86-secret.com/show_oc.php?id=97767 :banana:
This X2 3800+ e better than my Opteron148 :eek:
06-03-2006, 03:38 AM
phi|os

:slobber: i want one so bad, anyone know where this stepping might be obtained in the states??? I have to order from portugal if I want this:eek:
06-03-2006, 03:47 AM
Counter CS

:fact: Warning !!! Don´t try this at home.
:fact: Only for +18
:eek: only for real man !!! BTW, i don´t temember the real Vcore used, but i think that was 1.48v or 1.465v, anyway that´s not a problem :D
Here in Portugal is hot like 35/38ºC outside

http://img147.imageshack.us/img147/5...zx238007ws.jpg
06-05-2006, 06:22 AM
Misthral

Here my results: http://img333.imageshack.us/img333/6693/yeah3ll.gif

http://img333.imageshack.us/img333/4...rsair646rp.jpg

http://img349.imageshack.us/img349/7...rsair164ie.jpg
06-05-2006, 11:14 AM
NinjaWreck

Has anyone had issues with these boards having a memory beep error code? I just got a new from a Newegg RMA and I can't even get the display to come on. I keep getting a long beep error which the manual says is related to memory. I've tried my Mushkin CE-5, BE-5, and G.skill UCCC and all ram gets the same error beep. I've tried dual channel orange slots and single orange slot furthest from the CPU and still get the error. Any help would be appreciated.

Everything works fine on my DFI NF4 Ultra-D. If I can't get this resolved I'm going to give up on the ATI chipset altogether. I'll guess I'll just get an expert instead.
06-05-2006, 11:25 AM
situman

Have you read the entire thread? There are numerous resolutions to memory problems due to an immature bios.
06-05-2006, 11:49 AM
NinjaWreck

Quote:

Originally Posted by situman

Have you read the entire thread? There are numerous resolutions to memory problems due to an immature bios.

Yes I have. I don't see anything detailing my situation. I've even tried an old crappy 256mb PC2100 module just to get the system to post. I can't get anything to display at all so updating the bios is out of the question.

I've always praised DFI, but I'm starting to see why others hate these boards.

I'm trying to avoid another RMA, but it seems like my only option. I just don't want to get stuck in an infinite loop of DFI RMA's...
06-05-2006, 12:03 PM
Counter CS

Quote:

Originally Posted by NinjaWreck

Yes I have. I don't see anything detailing my situation. I've even tried an old crappy 256mb PC2100 module just to get the system to post. I can't get anything to display at all so updating the bios is out of the question.

I've always praised DFI, but I'm starting to see why others hate these boards.

I'm trying to avoid another RMA, but it seems like my only option. I just don't want to get stuck in an infinite loop of DFI RMA's...

What power suply are you using ?
Look if the jumper to reset the BIOS e in the pin 1-2 and not 2-3.

When i first look at my board i noticed some jumper wasn´t in the wright set, it could possibly be that.
Try find on the manual how you must set all jumpers. ;)
06-05-2006, 01:44 PM
situman

1 stick of ram at a time at different slots?
06-05-2006, 02:08 PM
NinjaWreck

Quote:

Originally Posted by Counter CS

What power suply are you using ?
Look if the jumper to reset the BIOS e in the pin 1-2 and not 2-3.

When i first look at my board i noticed some jumper wasn´t in the wright set, it could possibly be that.
Try find on the manual how you must set all jumpers. ;)

I'm using the PSU in my sig, Silverstone Zeus 750 watt. I've already checked all the jumpers and they are correctly set.

Quote:

Originally Posted by situman

1 stick of ram at a time at different slots?

I've tried all possible memory configs with CE-5, BE-5, and UCCC as well as some PC2100 I've had lying around.

I've already submitted an RMA ticket with newegg, thanks for the suggestions.

The previous board I got worked perfectly except for the fact that it kept rebooting during windows install. Maybe the third one will be the charm.

:mad:
06-06-2006, 03:38 AM
ChkDsk

Quote:

Originally Posted by ChkDsk

Are there any ideas about how to use more than 1 disk on this freaking mainboard? :P

I own 2x 36GB raptor, 2x200GB WD, 1x 160GB Maxtor and 1x 320GB Seagate is on it's way. But this mainboard is freaking me out!

The device, \Device\Scsi\m52881, did not respond within the timeout period.

Also, I cannot use the silicon image controller and the Uli controller at the same time unless I connect the drives on the Uli controller while Windows is booting from the Silicon Image controller. I tried 2 bèta biosses and the latest official.

Installing Windows on the Uli controller is like no option. Every (aprox) 5mins Windows hangs a few seconds. So with Windows installed, and plugging 2x 200GB on the Uli controller while booting I can use 4 disks, but the time-out is still there! Nothing is overclocked and all PCI cards are disconnected, IrDA is disabled and serial port is disabled.

If I connect all drives and then boot, I'll get the error message the Option rom cannot be invoke... This is freaking me out! My awesome 0610DPMW is getting lazy on this crapthing! ;)

:slapass: :confused: :confused:
06-06-2006, 05:58 AM
Counter CS

Quote:

Originally Posted by ChkDsk

:slapass: :confused: :confused:

Try the new drivers Integrated220

Link: http://www.nvidia.com/page/uli_drivers.html

Funny i can only download thise drivers from Nvidia FTP :confused:
06-06-2006, 07:03 AM
ChkDsk

Quote:

Originally Posted by Counter CS

Try the new drivers Integrated220

Link: http://www.nvidia.com/page/uli_drivers.html

Funny i can only download thise drivers from Nvidia FTP :confused:

Tried that... But the erroring stays... Also I want to use 6 HDD's and it looks like this board makes it just impossible! Isnt anyone fammiliar with this problem and/or assinging IRQ's and sh*t manually? I'm just :banana: around with this board for over one week and the best results I have is running windows on the Sil Image controller with a max of 2 HDD's. :slapass:
06-06-2006, 08:28 AM
Counter CS

Well, here i´m using 2x80Gb RAID0 ULi, 2x 160Gb ULi (not RAID0), 1x 80GB IDE
And i don´t have problems.

Have you hit F6 when isntaling WIN XP and used the Board Sata RAID Driver Disk ?
06-06-2006, 08:52 AM
ChkDsk

Quote:

Originally Posted by Counter CS

Well, here i´m using 2x80Gb RAID0 ULi, 2x 160Gb ULi (not RAID0), 1x 80GB IDE
And i don´t have problems.

Have you hit F6 when isntaling WIN XP and used the Board Sata RAID Driver Disk ?

But no Silicon Image drives attached? And you have no lockups every now and then?
http://img185.imageshack.us/img185/6122/lock1tz.th.jpg

Ofcourse I used the floppy:slap:

The controller just locks up and system freezes for a while... Happens about every 10mins...

BTW, with only 2 raptors on the ULi, SI disabled and no PCI cards I have the same problem... Tried several bioses already...
06-06-2006, 09:43 AM
Counter CS

Try scandisk, maybe you have Badsectors:fact:
06-06-2006, 11:55 AM
ChkDsk

Quote:

Originally Posted by Counter CS

Try scandisk, maybe you have Badsectors:fact:

http://dfi-street.com/forum/showthread.php?t=53169
06-06-2006, 01:19 PM
theonlybabyface

You need to remove the ULI Utility from loading up at startup. Use msconfig or the program of your choice....:)
06-07-2006, 09:44 AM
ChkDsk

Quote:

Originally Posted by theonlybabyface

You need to remove the ULI Utility from loading up at startup. Use msconfig or the program of your choice....:)

1) Doesn't help
2) Warning message at POST stays and Windows won't boot (blabla cannot be invoke or something)

Show 100 post(s) from this thread on one page