tankguys, and flickerdown both let you pick, but they only have limited weeks and steppings. The early 06's are all gone.
I do know that there will be a LDBHE 0601 XPMW on ebay starting tonight.
Printable View
tankguys, and flickerdown both let you pick, but they only have limited weeks and steppings. The early 06's are all gone.
I do know that there will be a LDBHE 0601 XPMW on ebay starting tonight.
You're actually running that at ~1.44V aren't you? ;)Quote:
Originally Posted by Jester FPS
Hi huys!I know that this thread is for the new 3800x2,but i've recently bought a 4200x2 LDBHE 0605SPDW and i'd like to post my results.It's a "N" chip and the most hot i've ever had.More than my two previous 3800x2(1*manchester,1=toledo).Actually it's not the best ocer(for now:p:) but i'm waiting about next week to put it to SS:)!It's stable 2.64(11*240)@1.45v and 2.75@1.55v.(i get 60C with xp-120+enermax,so i don't use it at all).
I'd like to notice that dfi's bios recognise that it has the errata123 bug(auto) and when i change it to disable i get about 100MB/s more bandwidth.You should try it with your Manchester,because i'm sure that it uses the same option..;)
I have my 3800 at 3Ghz on 1.6v on my Mach II GT now; not as good a clock as I was hoping for.
I have a buyer lined up for it, but I'm torn as to what to do. Should I sell it and go back to my 3.4Ghz Opteron or keep it? A quick reply would be very helpful. :)
sell both and get a new 3800+ that can do 3.1+ on the mach, and then run Rosetta with us :)
It's a possibility. ;)
If there are 3800s out there that will do 3.1Ghz+ then I'm sold on the idea. Could you recommend a stepping?
Most of the 06xx chips will run 3ghz or more fairly easily :)Quote:
Originally Posted by Kesnel
Just look for a non 'bugged chip
All the 06 3800+s are non cold bugged. Most should do 3.1 on phase easily. I can do 3 on water, and many chips are much better than mine. I see people doing 2.9 Ghz with 1.5v and less. They just don't give the proper voltage to do 3 Ghz :P
Quote:
Originally Posted by Kesnel
trade it for my opty 170 0550 upmw. :)
Absolute_0 is correct about the voltage thing;) I just have'nt worked my way to 3.0 yet. It will come as I burn in more and nudge my way there.
here is a screenie of 2900 @ 1.4 that I just finished. Apparently burning in might be helping, as yesterday I needed 1.42 to do 2900. Any less and core 1 would fail. I burned core 1 at 2900 1.42 all night and all day without core 0 priming at all. This seemed to help, as you can see.
[IMG]http://img226.imagvsmall5rf.pngeshack.us/img226/2927/2800primestock132[/IMG]
[IMG]http://img226.imageshack.us/img226/5...hrsmall5km.png[/IMG]
after some burn in I can now do 2850mhz stock vcore and ballistix @ 285 2.5v :)
let me pose this question. I am now trying to prime at 3000 @ 1.5v. When I do my temps shoot up to about 48c and one core or the other fails. It is different either time.
I am trying one at a time now, and they both seem to do fine on their own.
Is this an indication that my cooling is inadequate?
that is my guess
yeah man you are temp limited
that, and these 3800+s don't scale as well as my nice coldbugged 170 does. That thing will break through 3 Ghz like it's stock speeds. This 3800+ is hitting a wall around there, i can do 2.95 Ghz with 1.56 volts prime for a while, and even with 1.63v and a very cold room and 40c load, it will not prime at 3 Ghz for more than a minute. It really sucks.
But the burn in is definitely happening, i used to need 1.45 for 2.8, then 1.42, now i'm doing 2.8 with 1.40v and it's going. Good watercooling keeps the load around 37c ;).
I would definately benefit from a good watercooling rig, but I really think I am gonna hold out for ocz's phase unit when it comes out. I think it would make this chip smoke!
I would think all you would need to do is pop the IHS on that chip. Its most likely temps and the best way to drop them is either upgrade cooling or pop the IHS.
I'm not at all against popping the top, I've done it on my past few chips and saw an improvement...but I have heard that the ihs contact is very good on these 06 chips.
I'll search around a little, and see what I can find on before and afters.
well i slapped my phase on and i can prime at 3.15 Ghz with 1.55v and +4c load. Can't get much higher than that because i start needing more voltage, and it gets to +7c and core0 starts failing.
Mine is hitting a wall @ 2.8. Reaches 2.8 with 1.45v. I already gave 1.50v and still cant spi @ 2.850
What is teh stepping n teh code? T or N?Quote:
Originally Posted by MonkSP
Quote:
Originally Posted by MonkSP
Is this one.... Its a T chip
I got the same exact chip. Right now I'm priming it at 260x10 and 1.375 volts. I'm doing a blend test using sp2004 so it's not focusing mainly on the chip but my ram too because I hit a wall at around 263 with my ram. Just keep priming then raise, prime then raise. Start low to stretch it out (noob advice, ymmv). I hit that same wall at 2800 w/ 1.5 volts even... hopefully my burning in and stuff will solve that.Quote:
Originally Posted by MonkSP
I got another coming this week. LDBHE 0605 XPMW.
X2 3800+
LDBHE 0606APMW (N Chip)
2,8ghz 1,41v (1,45v in bios) Spi dual 32m (WC)
http://img366.imageshack.us/img366/6...141v8xm.th.jpg
Arrived yesterday, i only did this quick test while i was watching a movie :)
Tried also 3ghz even at 1,55v but it wasn´t stable in win. Maybe 2,9ghz i´ll see. This weekend i´ll test it on my vapo LS (stock) & maybe in 2 weeks on Dryice :D
Thread stats... I was a bit smoky lol. Enjoy :)
"moved to the top of the thread* (so we can all find 'em).
:toast: nice work stone_cold_Jimi. Gives a good quick glance at how the 06's are doing