Does your motherboard not give you any issues with the high fsb you are running it at?
And what is the "vmch" voltage option? What does it do?
Printable View
Does your motherboard not give you any issues with the high fsb you are running it at?
And what is the "vmch" voltage option? What does it do?
First boot on water ;) On weekend the benchs :)
http://valid.x86-secret.com/show_oc?id=77677
My 631 on warm air:
http://valid.x86-secret.com/show_oc?id=77761
http://img303.imageshack.us/img303/7...6air3qb.th.jpg
Those CM are clocking like crazy... I hope it works good on dry ice the next weekend... :D
:toast:
Hi, I bought my cpu in TigerDirect, and it can this cooled by chiller(water-freon cooling). It is stable on 5.1GHz 1,5V the same cooled(prime and Super PI 32M). Motherboards without Vmods. Tomorrow me and Devil_K-ce are testing on Dry Ice. I hope on 6GHz (after Vmods).
Edit: New WR is this
Cooled by Raven 155's SS
probably more to come in saturday :P
just a short question: does somebody know if theres a difference between abit aw8 and asus p5wd2 prem. considering max. oc?
just wondered because im getting an 920 that does 4,3ghz prime@1.35 cooled with boxed cooler but it was tested on p5wd2 prem.
My very first attempt at DI ever, using the Icepot that GHZ made on my 661. Going to either retry the 661 tonight or maybe give my 930 a shot :)
http://valid.x86-secret.com/cache/78074.png
http://i10.photobucket.com/albums/a1...ce/2001500.gif
http://i10.photobucket.com/albums/a1...dice/22750.gif
new WR cedar mile? http://www.xtremesystems.org/forums/...ad.php?t=92212
another 6ghz member:clap:Quote:
Going to either retry the 661 tonight or maybe give my 930 a shot
congrats
and can`t wait to see your 930 (100% OC?)
OMG this is the new WRQuote:
new WR cedar mile?
:woot:
Presler + 1900 Crossfire
http://i7.photobucket.com/albums/y29...firep5wd2e.jpg
http://i7.photobucket.com/albums/y29...irepresler.jpg
http://i7.photobucket.com/albums/y29...irepresler.jpg
http://i7.photobucket.com/albums/y29...irepresler.jpg
http://i7.photobucket.com/albums/y29...irepresler.jpg
i need a fresh install , new cats(6.1b in use) and a new PSU...Antec 550watts can`t handle 1900 Xfire + Presler @ xtreme OC
http://i7.photobucket.com/albums/y29...antecxfire.jpg
^^^ PC nice setup and nice scores. CF sucks in 3D01 though, run a single card on it and just clock the crap out of everything ;)
Man, I hope. The 930 on the SS suicides just 200MHz shy of the 661 on the SS, so I it could be close. I am hoping it does a bit better on DI than the 661 does, but I think I am going to run the 661 again tonight to for a little better and if I have any DI left over, will do the 930 tomorrow or maybe next weekend. By then, maybe I'll have gotten brave enough to put the SS on the x1900 ;)Quote:
and can`t wait to see your 930 (100% OC?)
Hi, a simple question I have:
How can all of you, get some high FSB, more than 320?
I stacked at 300 FSB, even 1 Mhz more ,and I got the blue screen error...
Mi cpu is an PentiumD 930/air cooled by SCYTHE NINJA DUAL 120MM fan,.
Is about the cooling system(under 0 celsius degrees,vapo, cascade, etc),or that's my MB limits for 15X multiplier?
With my "old" PentiumD 830,cpu (on 930 I cannot set multi to 14X), with multi set to 14X I booted and finished SPI at 317 FSB
Thanks for U answers.
Celeron now is 6G club~~~
http://img15.imgspot.com/u/06/74/03/61142497564.1.gif
25x multi? :eek: What kinda of cooling? That's amazing for a Celeron...excellent job!
1.6V on vapochill LS.........think is time on ln2..later....:DQuote:
Originally Posted by boostedevo
Dang, my 661 will only do 5.8GHz on a single stage. I guess all the low cache and FSB on the Celly helps it OC ;) Man, that might be close to 7GHz on LN2...good luck with it!
PcCI2iminal ,
what sort of symptoms you have with the 550 antec power supply and you say it can't handle that setup? just curious :)
Quote:
Originally Posted by Byron
the Antec can handle very well my 24/7 sytem
2x raptor 10k rpm raid 0
2 x 250GB WD ATA 7200rpms for backup
2x dvd-rw
1 x 1900
air cooled Presler 4.2ghz @ 1.35v or 4.5ghz @ 1.5v
and 4.7ghz for benchs
but i tryed to run 3d03(gt1 error) and 06(cpu bench error) with stock CF and Presler @ 4.4-4.5ghz ,the Antec is holding me back for sure and i will try Enermax and Zippy and run the tests again
This my Cedarmill 631 with water coling, with ABIT AW8 MAX vcore 1.350volt
http://img.techpowerup.org/060318/Co...2.JPG 3657.jpg
What is your stress temp?Quote:
Originally Posted by ^don.k's^
What do you mean about it ? Full temp ? Reboot/shutdown temp ?:confused:Quote:
Originally Posted by kakaroto
BTW it went as high as 70-72ยบ before crash.
Quote:
Originally Posted by Byron
here a new check
Presler @ 4.25 @ 1.4v + Crossfire OC 690/800mhz with 2 hds
http://i28.photobucket.com/albums/c2...inha/antec.jpg
http://i28.photobucket.com/albums/c2...irepresler.jpg
and 1.55v i lose score with drop @ 0.1v on 12v rail.
3d06
Presler @ 4.15 @ 1.4v = 1850
Presler @ 4.25ghz @ 1.55v = 1260
Still going strong there PcCI2iminal!
I've never seen anything as hot as this proc at this clock/Vc in my life. I tried everything to get those last 4-5FSB and it just wasn't happening. Temps took off like a rocket once I set the Vc. DI didn't have enough capacity to hold it :eek: Need like a 3-stage cascade at least or LN2 to bench this thing here...
http://valid.x86-secret.com/cache/80074.png
Hi,help me.
I have a 940 d @4400 vcore 1,475 and asus p5wd2 premium.
I wanted to know until that vcore I can be in day use with cooling to water,for day use.
Thanks
Guys if you were going to buy one of these chips to run on air which one would you grab?
Looks like to me the 631 and 930 are nice.
I am a tad bored and thinking about putting together an Intel rig again.