Printable View
what bios did you flash, exact name please!Quote:
Originally Posted by ye_3333
also, you might just buy a replacement bios chip (preflashed) of ebay. i got one for the p4p800se there, put it in my board and voila up and running... btw.. if you're not sure about the bios files on the asus site, take those the stilt linked to (that's what i asked the ebay guy to flash my chip with :D)
thanks but i found my problem and now the borad work only i cant control the vcore volt in the bios and not the multi who i fix that?
also who i do the vcore mod?
thanks alot!
Interesting. If that's the case then we can go for higher clocked dothans (740, 750 etc.) without having to boot up at 201FSB. Which bios for that?Quote:
Originally Posted by charlie
True, BUT when booted at 201, it allows you to clock REALLY high, 1:1 like 270 or higher, and it can't do that when booted below that.Quote:
Originally Posted by nCrusader
C
Have used up to 138MHz PCI-E frequency, but I had to increase the chipset voltage to 2,1V by modding. Not tested my Pentium M 730 between 170 and 200MHz, but my Celeron M stopped at 175MHz. That's a common problem with B1 and earlier Dothans across all boards. If you got a 7x5 chanses are high that it's a B1 one. You can use CPU-Z to find out which revision you got.Quote:
Originally Posted by Esa
btw, is this an issue of asus boards not being able to set NB strap in bios?Quote:
Originally Posted by charlie
or something else?
sorry if it's answered in detail somewhere here :rolleyes:
At 200 and turbo the asus boards sets a MASS of tweaks including strap tweaks etc. if you want awsome ram speed to around 220 with BH5 set 200 and turbo and use clockgen to clock. If you are looking for higher set 201 and use 865tweaker to dial in some speed.
i flash my p4c800e-deloxe bios to p4p800e bios!! and now i have alot of thinks in the bios (like vcore)
but still even if the vcore is 1.6v i cant boot at 200 fsb or 201!! i can only boot 133-198 but not 200 or higer!!
way? and what i need to do to get multi in this bios? and also what is vid coms? or some think like that! i see it in my bios!
thanks
Yep, that's how I've been doing mine as well. Obviously, take care in tightening down the heatsink evenly. When I had the fan bracket out of the heatsink, I removed the stock fan. Got a high flow fan on it now....soon to be ducted.Quote:
Originally Posted by stryg
i flash my p4c800e-deloxe bios to p4p800e bios!! and now i have alot of thinks in the bios (like vcore)
but still even if the vcore is 1.6v i cant boot at 200 fsb or 201!! i can only boot 133-198 but not 200 or higer!!
way? and what i need to do to get multi in this bios? and also what is vid coms? or some think like that! i see it in my bios!
thanks
Interestingly enough, I have the same exact problem. I have an M740 with a P4C800-E Deluxe board and the CPU runs ROCK STABLE at default voltage at 190FSB but I can't even boot at 200 or 201 FBS regardless of the voltage.Quote:
Originally Posted by ye_3333
At 190 FSB, I had the board loop 3dmark01 with Prime95 running in the background for 11.5 hours straight without a single error at default voltage so I am curious as to why I can't even boot at 200 FSB or higher.
Btw, all of you guys ROCK for having figured out the power of Dothan. I was very close to getting a San Diego CPU for my new setup but decided to go with Dothan instead and I couldn't be happier. :) :) :)
Thank you all for the infos. I don't currently have any working dothan setup but I am hoping to get my dothan 730 by the end of the week. I have P4GD1 and other stuff waiting for it. So at the moment I am just doing some research here in the forums.
Has anyone chipped their dothans when installing the zalman 7000 heatsink?
how it can be that all the guys can go with dothan 740+p4c800e-deloxe and thay rich 3400 ghzzzzz and i cab go over 2500 why???
also can some one give me alink to download the tweaker that can enabeld the cpc from windows?
thanks
isnt it in the sticky thread called 865/875 tweaker? :stick:Quote:
Originally Posted by ye_3333
see the first page for links you need 865/875 tweaker
they are reaching hi speeds due to subzero temps.
the max on air is between 2700 and 2800.
Quote:
Originally Posted by ye_3333
Calm down dude!Quote:
Originally Posted by ye_3333
And do some reading before flodding this post with questions already answered...
ok thanks..
i put my vapochill ls on the dothan and still cant goo over 2500 ghz!
:mad:
i am soory that i flow this thread... but i realy need some help and i dont see something that can help me.. soo can you help me rich hi fsb? thanks alot..
and again soory :p:
Have you done any vcore mods?
Might be that you dont get the vcore you think you do when setting it in bios...
Try the u-wire mod. Worth a try anyways.
New beta bios for P4C800-E Deluxe added. Please report back if you test it :)
i am now use the new bios for p4c800e-deloxe it only give me the vcore but still not the multi :(
and i still cant boot at 200/201 fsb!! :confused:
what all the guys here do with the same board and dothan 740 to over 199 fsb?
As far as I know it is not currently possible to change the multiplier in bios with any of the motherboards.(exept maybe on the VM)Quote:
Originally Posted by ye_3333
Let's hope Asus makes some new bioses with multi control. On the first page of the thread there are links to EIST(multi adjust) and clockgen(FSB adjust), maybe those help.
Quote:
Originally Posted by stryg
Please understand. The guy has the first 533 dothan in our country. He has an invitation from an excellent FX55 overclocker here for a duel
:frag:
but without your help he will not be able to attend.
:mad:
the whole country is watching
:YIPPIE:
PLEASE HELP. we have read everything but still can't figure out a solution :confused:
thx in advance :bows:
What memory are you using ? it could be something else that is stopping your overclock like memory or agp/pci lock , psu etc
try running memory at 320 with fsb at 200
what temps are you getting.
what happens of you boot below 200 and then use clockgen to go over 200.
how far did you get with the asus cooler with 13x200 thats 2600 with the u-wire for 1.568 it should work but be a little high on the temps.
give us some more info and we can try out best.
Quote:
Originally Posted by ye_3333
Thanks for your help :)
THE GUY IS USING:
ASUS P4C800-E DELUXE
corsair 512x2 pc4400
antec 550w (FOR VAPO AND ULTRA) +enermax 425 dual rail (FOR MOBO AND PLATIER)
200g sata
36giga raptor
albatron 6800ultra +ZALMAN WATER BLOCK
My VM does allow multiplier change in the BIOS. The problem is it doesn't allow anything else!Quote:
Originally Posted by Esa