Printable View
I just want to run it at full 12v. Oh well, Watercooling will be installed sometime later this week(I am getting my wisdom teeth removed tomorrow) =/. When I feel better is when I will put all of it together.. I hope it is soon. :0, I just think it'd be nice to run the fan 12v in the meantime.
I intend to get HIS Excalibur X800Pro IceQ II VIVO Edition, mainly for its extra cooling features..... ANYONE tried this mod for this card successfully??
@bitterswt: Yes it works. I've the same card.
thanks Svendosity, u just made my day ... i:toast: u. by the way, how's the overclock for this card? is it stable at the default ati xt bios?Quote:
Originally posted by Svendosity
@bitterswt: Yes it works. I've the same card.
Mine is stable at the XT Bios but its already maxed out. My GPU Clock wont do over 520Mhz with stock voltage, with 1.4V Im able to reach 542Mhz. But another His I saw only reached 505Mhz@1.4V @16pipes, so it vary a lot.
Hmmm..... this is weird..... i thought with all these heat issues after conversion, the ICEQ cooler would help:confused:Quote:
Originally posted by Svendosity
Mine is stable at the XT Bios but its already maxed out. My GPU Clock wont do over 520Mhz with stock voltage, with 1.4V Im able to reach 542Mhz. But another His I saw only reached 505Mhz@1.4V @16pipes, so it vary a lot.
Can any1 out there with the HIS VIVO please post their experiences??
My x800 pro Club3D vivo has 16 pipes after bios mod but with the original bios I am not able to go over 500 MHz on gpu (memories go up to 585 MHz). With gigabyte bios is even worse.
What bios do you suggest to use to gain some more gpu MHz?
Do someone know the quality of thermal paste used in this card? I have a real high temp at 500 MHz: 79° C during atitool 3D test.
Bye,
Mao
Getting real high temps on my powercolor x800pro vivo@ xt as well.. getting close to 80C after 5 mins of "scan for artifacts" in atitool. The card is running an xt bios with 526/573 clocks as default. Wish the darn fan would spin up a little.. its nice and quiet.. but doesnt really cool enough.
Anyone have a 520/560 XT bios btw? Might lower temps a littlebit. Is it possible to check voltage on the gpu through software?
Hello .
I have a question , i want to ask if anyone had tryed to do the mod im a Ge Cube x800 pro vivo .
Because i´ma afraid to buy one and no to get the mod .
Please answer .
cumps for all
Sorry my english
Yeap, Ive done it on a Gecube card. It works !!!!!Quote:
Originally posted by |-jokker-|
Hello .
I have a question , i want to ask if anyone had tryed to do the mod im a Ge Cube x800 pro vivo .
Because i´ma afraid to buy one and no to get the mod .
Please answer .
cumps for all
Sorry my english
Same here - read my postings page 12-13
Thankx guys .
Tomorrow i´m getting my x800 pro :D
I cant get those speeds.Quote:
Originally posted by StormPC
At stock volts (1.3v) you should be able to run around 540/580 on average. At 1.4v it's more like 570/610. These are averages plus or minus 5-10 points, on stock air.
You have to play with it. If memory's too high you'll get arties and if GPU core is too high it will freeze.
only with v-mods 1.4 > 1.55 and mem 2.02 > 2.08 MAx 560-577 :mad: I ave got A cpu cooler on GPU mem passife cooled.
Powercoler X800 ViVo @ XT PE bios.
Can u guy's give me some links 2 other bios files that u use to clock high speeds ? i would like to get 600 mem or so.
OMG :| what bios are you using ?Quote:
Originally posted by CodeRed
Thanks, just starting really.
This is my first ATI card so I have to learn how to tune this beast.
BTW the 16 pipe mod worked :)
only prob is now the core will only go to 550 (with 12 pipes it did 563). But volt mods and some better cooling to come :D
I would love 2 test that one i'm getting 560 core max with v-mods :'(
I can't get high mhz on the gpu either. About 520 MHz with watercooling. Btw load temps dropped 30 C going from air to wc.
But mem are nice. They do about 590-595 MHz without artifacts. Think some extra cooling would be nice, because they are hot as hell.
can't get that mem that high :( 577 maxed out with mods.Quote:
Originally posted by Nyge
I can't get high mhz on the gpu either. About 520 MHz with watercooling. Btw load temps dropped 30 C going from air to wc.
But mem are nice. They do about 590-595 MHz without artifacts. Think some extra cooling would be nice, because they are hot as hell.
That's weird. Your mem are Samsung 1.6ns, right? Maybe it's just luck of the draw then. My card is still without any vmods.
U still @ original bios ?Quote:
Originally posted by Nyge
That's weird. Your mem are Samsung 1.6ns, right? Maybe it's just luck of the draw then. My card is still without any vmods.
If not can u post a link to ur bios ? then i'm gonna try that one.
Yes, for now I have the original back. Tried two different XT bioses, but couldn't see any different in oc.Quote:
Originally posted by Astennu
U still @ original bios ?
If not can u post a link to ur bios ? then i'm gonna try that one.
I am using the original Gecube X800Pro VIVO BIOS.Quote:
Originally posted by Astennu
OMG :| what bios are you using ?
I would love 2 test that one i'm getting 560 core max with v-mods :'(
link
http://ricardosimoes.no.sapo.pt/16%20pipes.jpg
http://ricardosimoes.no.sapo.pt/CoreXT.jpg
Done guys.
Thank you all for the support :D
[[]]
I'm having all sorts of problems validating all the pipes are really enabled.
ATI tool shows different results after each flash and no program can't even read the clocks.
ATI tool has showed 8 pipes and now show 1 pipe after the last flash. I still get 12K 3dmarks on a terrible Win XP install and 11X204 with a Barton so it can't be that bad. I have a Powercolor VIVO, flashed with the gigabyte's, then with the Ati XT bios, and now finally to the Gecube VIVO (I'm just trying to get the ATI tool to work, that's why i tried a different manufacturer bios)
Could anybody that have the original Powercolor VIVO bios PM me? Flash it with the Gigabyte tool to get the complete flash back to 12 Pipes and original clocks right?
Finally got my Connect3d x800 Pro Vivo working with 16 Pipes and did the pencil mod. On 1.5V I can run 580/580
Greetz
This is for the guys who have connected the cooling fan successfully to an external 12volt source, could you tell me which wires you used for what?
I had hoped that the red would be 12V in, the black would be ground and the speed sensor would be white. But what nags me is that the black and the red seem the wrong way around for a conventional fan riser. Any help would be greatly appreciated as I don't like seeing the core get so hot and I'd prefer it if the fan would go faster. It always spins up to full speed then slows down on start up.
Does anyone have a BIOS editor for X800 based cards?
If so, please post a link or send it to yaphea at gmx dot net. Thank you!