-=Dfi Infinty&LanParty Rev B Faq and more=-

Printable View

Show 100 post(s) from this thread on one page

10-09-2004, 03:30 PM
zeon

Usually I format it, since windows installs different files according to mobo/cpu. That's why I have one partition just for windows, one for swap and the other as backup files :) that way I can format windows without having to backup things up ;)

Good luck!
10-09-2004, 06:58 PM
Massive

Quote:

Originally Posted by TEDY

One question:

I have ABIT NF7-S 2.0 now, while new DFI NF2 ULTRA INFINITY laying down on floor...box etc...

Both are same chipset etc ?

I'm using WINDOWS XP...Can i replace mobo using same hdd , withour fresh install of windows xp ?

i have friend who has done it on windows 2000 , dunno how it works on xp...

Yes I think you do, because XP would automatically detect your setting while you're already have necessarry driver for nforce2 mobo so you're all set to change it to your other mobo without reinstalling windows again...
10-10-2004, 12:30 AM
TEDY

I guess i'll do fresh install cause i'll be using SATA now as primary hdd hehe....
10-10-2004, 06:42 AM
TEDY

when you made backup what did you guys backup mostly ?

emails/address/irc logs ?

what else.....
10-11-2004, 06:01 AM
centaur

2 Attachment(s)

has anybody done this vdimm mod yet?
i think this way is more elegant and works fine. i just searched for another point and found him on the backside :)
10-11-2004, 02:07 PM
zeon

Quote:

Originally Posted by TEDY

when you made backup what did you guys backup mostly ?

emails/address/irc logs ?

what else.....

whatever I need, work files, movies, mp3 bla bla bla
:rolleyes:
10-11-2004, 02:08 PM
zeon

Quote:

Originally Posted by centaur

has anybody done this vdimm mod yet?
i think this way is more elegant and works fine. i just searched for another point and found him on the backside :)

can you please explain in more detail that VDIMM mod? ;)
10-11-2004, 11:00 PM
SAE

Quote:

Originally Posted by centaur

has anybody done this vdimm mod yet?
i think this way is more elegant and works fine. i just searched for another point and found him on the backside :)

Looking nice, that thing. :thumbsup:

And not too dangerous for noobs and peeps with some shaky hands ripping everything off the board that's in reach ;)
As it's on the backside of the pcb and not attached to an smd resistor there may not be this much accidents lifting the SMD making the DFI unworkable.

Great job there :D
10-12-2004, 12:06 AM
centaur

Quote:

Originally Posted by zeon

can you please explain in more detail that VDIMM mod? ;)

it's the same mod like the "old" http://xtremesystems.org/forums/show...644#post395644
but i solder on the backside instead of the smd-resistor. no more to say, it works great :banana:
but there isn't much soldering iron, so take care.
10-12-2004, 12:45 AM
SAE

Quote:

Originally Posted by centaur

but there isn't much soldering iron, so take care.

You mean, there's not much solder? (Loetzinn) :)

But ain't there much solder at the solder joints of the smds either? :D
10-12-2004, 12:56 AM
centaur

[german] ich sollt doch besseres englisch lernen :D [/german]

is "tin-solder" the correct word? :p

there isn't much, but enought
if you're good, you can solder new tin-solder on the small cooper-plate
10-12-2004, 01:59 AM
SAE

Quote:

Originally Posted by centaur

[german] ich sollt doch besseres englisch lernen :D [/german]

is "tin-solder" the correct word? :p

there isn't much, but enought
if you're good, you can solder new tin-solder on the small cooper-plate

Hehe :D

Anyway, thanks for the easy mod :) I like it!
10-12-2004, 06:13 AM
TEDY

Where to enable/disable CPC in BIOS ?

i'm using default bios still...

11/27/03 OFFICIAL
10-12-2004, 06:44 AM
TEDY

wtf weird reading of voltages ?

+---------------+---------------+----------+------------+------------+------------+------------+------------+------------+------------+------------+------------+------------+------------+------------+------------+
| | | | Case | CPU | CPU | VCORE | Core 1 | +3.3 | +5.00 | +12.00 | -12.00 | -5.00 | Fan 1 | Fan 2 | Fan 3 |
+---------------+---------------+----------+------------+------------+------------+------------+------------+------------+------------+------------+------------+------------+------------+------------+------------+
| 12.10.2004 | 16:48:57 | 1838 MHz | 30° C | 30° C | 12° C | 1,28 V | 1,47 V | 3,22 V | 5,00 V | 12,10 V | -12,44 V | 0,54 V | 2743 RPM | 0 RPM | 0 RPM |
| 12.10.2004 | 16:48:52 | 1838 MHz | 29° C | 30° C | 10° C | 1,28 V | 1,49 V | 3,20 V | 5,00 V | 12,10 V | -12,44 V | 0,49 V | 2743 RPM | 0 RPM | 0 RPM |
| 12.10.2004 | 16:48:47 | 1838 MHz | 30° C | 30° C | 9° C | 1,26 V | 1,47 V | 3,22 V | 4,97 V | 12,16 V | -12,44 V | 0,49 V | 2743 RPM | 0 RPM | 0 RPM |
| 12.10.2004 | 16:48:42 | 1838 MHz | 30° C | 30° C | 9° C | 1,28 V | 1,47 V | 3,20 V | 4,97 V | 12,10 V | -12,44 V | 0,49 V | 2743 RPM | 0 RPM | 0 RPM |
| 12.10.2004 | 16:48:37 | 1838 MHz | 30° C | 30° C | 9° C | 1,28 V | 1,47 V | 3,22 V | 4,97 V | 12,10 V | -12,44 V | 0,49 V | 2766 RPM | 0 RPM | 0 RPM |
| 12.10.2004 | 16:48:32 | 1838 MHz | 29° C | 30° C | 10° C | 1,28 V | 1,49 V | 3,22 V | 4,97 V | 12,10 V | -12,35 V | 0,43 V | 2743 RPM | 0 RPM | 0 RPM |
| 12.10.2004 | 16:48:27 | 1838 MHz | 30° C | 30° C | 11° C | 1,26 V | 1,49 V | 3,22 V | 4,97 V | 12,16 V | -12,44 V | 0,54 V | 2766 RPM | 0 RPM | 0 RPM |
| 12.10.2004 | 16:48:22 | 1838 MHz | 30° C | 30° C | 10° C | 1,30 V | 1,47 V | 3,22 V | 4,97 V | 12,10 V | -12,44 V | 0,49 V | 2743 RPM | 0 RPM | 0 RPM |
| 12.10.2004 | 16:48:17 | 1838 MHz | 30° C | 30° C | 9° C | 1,28 V | 1,47 V | 3,22 V | 4,97 V | 12,10 V | -12,44 V | 0,49 V | 2766 RPM | 0 RPM | 0 RPM |
| 12.10.2004 | 16:48:12 | 1838 MHz | 30° C | 30° C | 9° C | 1,26 V | 1,49 V | 3,22 V | 4,97 V | 12,10 V | -12,44 V | 0,43 V | 2743 RPM | 0 RPM | 0 RPM |
10-12-2004, 11:33 AM
SAE

Quote:

Originally Posted by TEDY

Where to enable/disable CPC in BIOS ?

i'm using default bios still...

11/27/03 OFFICIAL

There's no such option in this old bios revision... you should use 6-19 to get that.
10-12-2004, 02:30 PM
Jesus

Quote:

Originally Posted by centaur

[german] ich sollt doch besseres englisch lernen :D [/german]

is "tin-solder" the correct word? :p

there isn't much, but enought
if you're good, you can solder new tin-solder on the small cooper-plate

Ja soltest du villeicht:D

Yeeehah, now i know what I'm going to when I get that feeling agian...
10-12-2004, 02:35 PM
TEDY

yep SAE fixed that

and MBM5 voltage readings too...only VDD missing hehe
10-12-2004, 02:43 PM
SAE

Quote:

Originally Posted by TEDY

yep SAE fixed that

and MBM5 voltage readings too...only VDD missing hehe

Great :toast:
10-12-2004, 09:31 PM
FlyingHamster

hey guys, if my games crash, but my comp doesnt freeze, what does that usually mean? do I need more vcore? agp? vdimm???

cuz right now im trying to get 240x11 stable. at 1.975 in bios, 3.2vdimm, 1:1 ratio, 1.6vagp, 66 agp

just thought i'd hear your suggestions. :D
10-13-2004, 11:57 AM
TEDY

have weird system...doesnt work more then 210 at all geeze

was able to "burn in" khx3000/512 today 225mhz memtest cpc on.....etc...

weird weird
10-13-2004, 01:50 PM
TEDY

I can't get anything stable beyond 200!

Fresh new!

Please advice.....

and post your bios timings alpha and etc....wtf am i doing wrong ?

khx3000/512 is in slot 3 dimm 1....

i know it's not memory.....worked 220 easily on nf7-s 2.0

starting to get piss off this dfi....
10-14-2004, 06:16 AM
Massive

try BIOS change...even though you're using newest default BIOS...but sometimes default BIOS won't do u any good for fsb 200 and above...you got to use modded driver...try oscar wu or hell fire one....
10-14-2004, 07:42 AM
TEDY

i'm so scary to flash it...without bios savior :>
10-14-2004, 12:15 PM
FlyingHamster

Quote:

Originally Posted by TEDY

i'm so scary to flash it...without bios savior :>

c mon, ur on the XTREME systems forums. ;)

but yea, it might not be a good idea to flash w/out the bios savior. I would try HF's 3EG Rev 3 bios. I dont know a single person who had a bad flash with that bios. and its a great one too btw. :D
10-14-2004, 01:42 PM
Massive

Quote:

Originally Posted by TEDY

i'm so scary to flash it...without bios savior :>

try winflash that comes with your mobo cd...I've done it several times without a single hickup...I'd even change it with the newer and older BIOS forward and back...winflash is very usable just keep in mind before using it...don't overclock your system...try to load "optimal setting" at BIOS bedore you flashed it with winflash...and load it again at the first time you reboot after you flashed...do the reboot again...then you're ready to do some serious OC :)

all of that without bios saviour :D

Show 100 post(s) from this thread on one page