yes, 1600, correct timings, and 1,5v, the pc works absoluty fine with running 1600, crysis, prime..., but after psu off and on...Quote:
Originally Posted by Raja@ASUS
Printable View
yes, 1600, correct timings, and 1,5v, the pc works absoluty fine with running 1600, crysis, prime..., but after psu off and on...Quote:
Originally Posted by Raja@ASUS
Try a small boost to VTT(VCCIO), and VCC and see if it still does it.
small boost? could u plz say me some values, which should be applied, and where i find vtt and vcc, im not at home right nowQuote:
Originally Posted by Raja@ASUS
When you get back home can you please PM me a complete list of your BIOS settings and voltages please? I will then return that to you with some stuff to try...Quote:
Originally Posted by B1gD4ddy
-Raja
my only changes are sata to ahci, vdimm fix to 1,5, manually latencys, and fix 1600, cpu runs at stockQuote:
Originally Posted by Raja@ASUS
Sent you a PM. I need to see what the BIOS is defaulting to on sub-timings (the value will be shown next to each sub-timing). I think it's a setting issue because you can POST from AC power cycle at DDR3-1066. It's either the sub-timings or the memory controller in your CPU needs a little more voltage to handle the 4GB density modules at DDR3-1600 speeds.
For those wanting fix lists for the latest P67 beta BIOS releases:
P8H67 BIOS 1002:
- Enhance USB I/O device compatibility
- Enhance PCIE device compatibility
P8H67-I BIOS 0505:
- Enhance USB device compatibility
- Improve system stability
P8H67-M BIOS 0607:
- Enhance PCIE device compatibility
- Fix system may hang at POST if HDD has NTFS partition with allocation size other than 4Kbytes.
- Enhance USB I/O device compatibility
P8H67-M PRO BIOS 1002:
- - Enhance PCIE device compatibility
- Fix system may hang at POST if HDD has NTFS partition with allocation size other than 4Kbytes.
- Enhance USB I/O device compatibility
P8P67 BIOS 1505:
- Display warning when doing BIOS Print without USB Flash plugged in.
- Enhance USB I/O compatibility
P8P67 Rev 3.1 BIOS 0105:
- Initial Release
P8P67 Pro Rev 3.1 BIOS 0105:
- Initial Release
P8P67 LE BIOS 1011:
- Enhance PCIE device compatibility
- Fix system may hang at POST if HDD has NTFS partition with allocation size other than 4Kbytes.
- Enhance USB I/O compatibility
- Add support for “Wait for F1 if Error”
- Display warning when doing BIOS Print without USB Flash plugged in.
P8P67-M PRO BIOS 0709:
- Fix system may hang at POST if HDD has NTFS partition with allocation size other than 4Kbytes.
P8P67-M BIOS 0901:
- Fix system may hang at POST if HDD has NTFS partition with allocation size other than 4Kbytes.
where is the latest beta bios for
p8p67 ws revo?
Is there a new bios for the Sabertooth P67 in the pipeline?
Has anyone tried this bios to P8P67 Deluxe? http://www.asustek.pl/Pawel%20S/P8P6...-ASUS-1606.rar
Can anyone list all the fixes in the new 1502 BIOS for the Sabertooth P67?
Yes I’m using it ... no problems so farQuote:
Originally Posted by ju-rek
http://img30.imageshack.us/img30/6162/bios1606.th.jpg
Tell me, therefore, whether the need for greater tension as the 1305? In 1503 we had the BIOS to increase the tension to get the same OC, maybe there is something changed?Quote:
Yes I’m using it ... no problems so far