Bigtoe(or anyone), know if it's possible to combine the best features of these two bios for use with CT-479 adapter? Like VID and multi adjustment from VM added to P4P800-SE bios.
P4P800-SE
P4P800-VM
Thank you
Printable View
Im workin on the p4c800e at the mo....hopefully soon I will have the answerQuote:
Originally Posted by Astral7
max3 18 bios, sorry i have been away, OCZ keep me to busy.
As usual UAYOR (use at your own risk)
Max3 18
Thanks for your efforts. I shot a pm to tictac but I guess he is busy as well. I read over at BIOSMods where Tmod said it is very hard to open up things such as multi options with these bios. But I will keep trying. I really don't know why Asus did this. :confused: I mean all this time the multi option was there when the only chip that could use it was an ES. Now with the CT-479 and unlocked downward multis to 6x they take it out. :rolleyes:Quote:
Originally Posted by bigtoe
Anyway, we will figure it out eventually.
Thanks again Tony
What an idea. I would do just about anything for a bios like that!Quote:
Originally Posted by Astral7
is these has Epox 8KDA3I mod bios so that can support mobile A64 3400+?
Hi there B T :)Quote:
Originally Posted by bigtoe
Maybe if only for "names - sake", I shoulda dropped u a mail before now, but having not done so, I do hope u are well & Life is good for ya!
Hows that P4C800E Deluxe Bios looking?
Dropped my IC7 MAX3 for this board. My 2.8 Northwood C @ 240fsb 1:1 with OCZ PC3700EB now runs at 246fsb 1:1 :toast:
Better still are the Temps:
Idle down to 20 deg.C on CPU & 20 deg.C on Case from 36 deg.C on CPU & 34 deg.C on case. :banana:
(maybe only half a banana as Asus probe & Bios dont match)
Cant wait to get Hipros MAXIMISER on this rig.
A lot of folk rate the IC7 MAX3 as the best Overclocking board for the Socket 478 CPU's but from what I see here, Asus has the edge by 6Mhz on the fsb, yet hard drive access through the same High Point ATA133 controller appears a tad laggier. Have set PCI Latency to 32, same as MAX3. Default is 64! Any ideas BT?
I'm waffling again, my JD & coke needs more rocks & JD so I'm away! :D
Speak again soon bud & all the Best
Kin
Please please please give info on the P4C800E-D BIOS.. even if its a list of new bit and fixes your wokin on.. iv JUST got my board and i wanna play.. only @ 4Ghz @ 1.3v on my 3.2 EO step scotty.. want more.. my ram is good with this bios though..ballistix 2-3-2-7 @ 250Mhz
Im workin on the CT 479 bios, to add multi support.Quote:
Originally Posted by bigmunkey
MSI Neo2 and SLI latest Bios, this one has X2 support and they say cures the 90nm issues.
grab it here
hey bigtoe. i have the sl7pm 3.2 scotty. do you have a bios that will enable my to drop the multi to 14 like some of the other scottys can.. nice to see your workin on the adaptor, i got a dothan sat at home andi got an adaptor on its way.. got my dothan on ebay for £25... its a 1.4Ghz one :D
can this bios can be flashed to both k8n neo 2 plat (nforce 3 ultra) AND neo 4 sli (nf4 sli) ??? (bios name says 7100 which indicates its for neo 4 sli) :confused: :confused: :confused: :confused:Quote:
Originally Posted by bigtoe
so is this definitly useable for neo2?
so this bios for MSI K8N Neo2 and supports san diego/venice cpus ?Quote:
Originally Posted by bigtoe
it is neo4 bios....
typo error there ;)
Great job. Now if only Asus would do this. :lol:Quote:
Originally Posted by bigtoe
any news yet to a new P4C800E-D BIOS???
Hello there!
I'm new in the forum and with a search i did i couldn't find a modded BIOS for the EPOX 9nda. I'm not intresting in voltage increases because i have done the Vmem mod. I just want to get more options for the memory. Is there a way to do this in BIOS and not every time with A64 tweaker?
Is there a secret menu in EPOX?
anxiously awaiting those p4c800-e dlx bios bigtoe. BTW love your modded bios man
Does anyone have modded bios for MSI K8N NEO2 Platinum?
tnx
Great thread! Props to Big Toe & TicTac for all the hard work. I am looking for a modded bios for the Abit IS-10. Tried the one off of Kunnaks site but there were no unlocked options after I flashed. Tried multiple times with no luck. Here is the link to the abit bios:
http://www.abit-usa.com/downloads/bi...es=1&model=137
Any help will be greatly appreciated!
litledevil: google and search are good to use.
http://www.xtremesystems.org/forums/...3&goto=newpost
A buddy of mine has been using a p4 mobile sl7du with some success on these boards but i bought the "E" stepping of this processor and it wont do anything is there an updated bios to recognize it ??? :stick:
I have a serious issue with my DFI nf4 ultra-d
I have a 3700+ Sanny
It wont get beyond the 310mhz htt. and also it wont give me my 3.7vddr any more or i will see windows in 16bit colors :slap:
Yesterday i played with DI but cant set really a record because i need a high htt and the 3.7vddr.
Can someone help me?
Hello BigToe..
I own a IC7 ( just the regular. Not -G or MaX III ) and a 2.8 SL6WJ.
Problem is that is clocks like "#¤%&/.. Meaning fsb235 is THE limit for me. ( tried everything, mem divider, volts, pci-lock, game acceleration and so on. )..
Now i found out that im kinda missing a feature in bios called "Performance Mode" or "PAT".. It SHOULD be located just underneath the stuff with "Game Acceleration"..
Would you try to see if you could find something called that, and unlock it ?
The newest from abit: ftp://ftp.abit.com.tw/pub/download/bios/ic7//ic728.exe
Greetings, Tonni Lerche - Denmark =)