UMMM, I think I use 1/2 OD, i dunno its the smaller one, always used the smaller so I could fit insulation sleeving over when using chiller.Quote:
Originally Posted by SNiiPE_DoGG
Printable View
UMMM, I think I use 1/2 OD, i dunno its the smaller one, always used the smaller so I could fit insulation sleeving over when using chiller.Quote:
Originally Posted by SNiiPE_DoGG
k, thats 3/8" barbs, cool. PM me your address :up:Quote:
Originally Posted by chew*
Thanks for the info Tony. I only use benches as stability testers, but don't forget the internets is serious business ;) Don't go ruffling any feathers. I like my pc to be as fast as I can afford for 24/7 use which means air cooling. I think I'm going to upgrade my hsf if I can't lower my heat a little.
btw little confession, I just noticed I mounted my heatsink with the fan blowing foward instead of towards the rear exhaust :shakes: I wonder if that's why my temps are as high as they are? :rolleyes:
I ever mention I'm scottish and stubborn as a mule.......The board, cpu and xigamatek kept saying NOOOOOOOO!!!! and I Kept saying YESSSSSSS!!!
Some Tape modifications to the xigamatek and a high RPM sanyo denki.........Ac installed in window.........I eventually won in the end ;)
Now I give up on air, there is not .0001 mhz left for hardcore benching on air......Sure I can PI 1m and validate but I've already been there done that so now I want to focus on stability/performance a little more.....
Look at those OCZ animals just tearing it up........I was lazy I did not bench 32M PI however they will pass 32M..........screenshot 2 because "pics or it never happened" ;)
MSI 790FXGD70
2 X 4890's Stock air
PC P&C 750W
OCZ animals
http://members.cox.net/wmdieselmc26/...s%20bench4.JPG
http://members.cox.net/wmdieselmc26/...0potential.JPG
nice work chew*
i need a cooler pronto:rofl:
this stock cooler beggin for mercy
I have 1.3b6 and am starting to think I'm hitting a BIOS issue. Looking at your post(what I put in bold)Maybe that's why I'm having issues going passed 4.1Ghz....I have tried setting after setting with no luck:down:Quote:
Originally Posted by Tony
I'm 100% load right now with 1.5v, and the temp is holding below zero(I don't know how low tho because I don't have a real temp gage and this board hates - temps)
so:shrug:
Anyone know how far, and inbetween some of the voltages need to stay aligned?
be sure to use a 32-bit OS for 4ghz+ overclocking. it makes a world of difference.Quote:
Originally Posted by DaMulta
Quote:
Originally Posted by biohead
so windows xp 32 is better then win 7 for a clock speed quest?
So 64bit O/s holds down speeds?
Also
SO SO SO close I was this morning! I want my 10k Xpoints!
http://img.techpowerup.org/090509/x9834771.jpg
137 BETA works very well. I've just got a pair Micron based SuperTalent 2x2GB kit for ~$70. :D
http://img89.imageshack.us/img89/7222/76329529.jpg
http://img24.imageshack.us/img24/780...primeblend.jpg
...VDIMM@1.96V
http://img24.imageshack.us/img24/895...ememnb2800.png
I like them. :)
My goodness. How the hell do you get 3.20GHz NB? How much volt? That is awesome.Quote:
Originally Posted by DaMulta
You use Phase change ;)
Great results guys. I got my board here.. and 1.3b7 works so much better then 1.2 :)
Chew - Nice results on 06.. what were your GPU clocks at for your 4890? I am assuming like 1000/1100?
Oliverda - WOW.. 800 Cas 6.. that is insane.. I can only do 750'ish on my Kingston. Does Microns are very nice.. I might have to try my other set of D9 :) What type of vDDR were you running, and how about vNB?
- Ton
Top Secret , custom bios I made since rivatuner will not clock both cards in crossfire + XP. I will say they are still on stock air.Quote:
Originally Posted by TiTON
1.96V VDDR, everything else was at stock (VCORE and NB Voltage were at stock when I was running Prime blend test). :)Quote:
Originally Posted by TiTON
Oliverda,
Very nice. I have been mainly using Kingstons on my MSI. I need to grab my sticks of Crucial and see what chips are on them :P
Great find for only $70 :)
Ton
http://www.techpowerup.com/downloads...Preview_1.html
Chew
Wiz released GPUTool the other day if you have not seen it.
Phase:)Quote:
Originally Posted by lopri
http://img.techpowerup.org/090509/stable.jpg
Been running BOINC at 100% load all day with no fail.
Also have my PCI-E volts turned up just a tad, along with SB
Thx will take a look at it but I'm not a fan of most utilities.......Unlock the clock limits in CCC and i'm good to go......KISS method.Quote:
Originally Posted by DaMulta
My best guess damulta is you will be able to run 4.2-4.3 100% stable based on what I can bench at......usually have to drop about 200mhz for prime stable...and I didn't try to exceed 4380benchable in the review, but it may have been possible..
Very light tool it be.
Tab for voltage-you want to blow up your cards you can lol
Heh My bios already loads plenty of voltage :DQuote:
Originally Posted by DaMulta
Ehh they going on water before I go LN2 so I'll show you what I'm running on stock air Titon ;)
Bios modding was a PITA.....still need to mod in some ram volts, waiting to take the core's heat out of the equasion though.....I have plenty of headroom in my clock slider bar.
http://members.cox.net/wmdieselmc26/4890's.JPG
Hey Chew.. very nice cards clocks you got there :) I am putting the 955 on phase before going LN2.. trying to get more mileage on this board :P
- Ton
Is the 4th core unlock possible with 137 beta? Has anyone tried it?
For all good boys who play by the rules. :D
Official 1.3 Bios is out!
http://www.msi.com/index.php?func=do...1&prod_no=1740
What is - Support NPRP project?
I wonder if they changed anything over the beta bios.
Over at ocz forums, Tony said the 1.3 is based off the 136 beta and 137 beta is a newer bios possibly leading to a 1.3.x bios. Nprp from what I've been able to google has to do with cool'n quiet.