Those look absolutely awesome.
Black with white interior is my favorite.
Printable View
Those look absolutely awesome.
Black with white interior is my favorite.
simply amazing. I remember seeing this when it was about 2 or 3 pages long. and now you've blown this into something completely full out Awesomeness.
I would get this case if it was cheaper than the TJ07. but we will see.
Great work. Rep+ for you.. even though we don't rep here. lol
Tried a render with some components installed. Unfortunately there are not many SketchUp components available. Think I've found some better graphics cards for next time though! Also think the paint is too glossy.....
Parts:-
Thermochill 120.4 rad with 8x 38mm fans and 38mm shrouds in push-pull.
Thermochill 120.3 rad with 6x 38mm fans and 38mm shrouds in push-pull.
Long PSU (200x160x86).
4x Raptor HDD's.
2x Optical Drives.
Akasa Fan Control Pro.
Alphacool LCD Display.
2x EK reservoirs.
2x Lang D5 Pumps.
Asus Rampage Extreme.
2x Graphics Cards. (will replace these on my next render!)
Apogee GTX.
http://i277.photobucket.com/albums/k...Install-01.jpg
^ I can has invertedATX render, please?
:)
do u have one who build that awesome case ore is it only future design and hope ?!
I'll see what I can do. If and when I get some time.Quote:
Originally Posted by dark4181
We all live in hope! There is a possibility that a case will be built based on my design, but it's early days. Even if it does happen, it will be some time in the future. Sadly, it may never be a product available to purchase if production costs are not viable....Quote:
Originally Posted by whuzabi
would you put some pictures of him with more hardware in the case painted red, because I think red would be much better and more beautiful!
Quote:
Originally Posted by dark4181
Here's another render with components installed....Quote:
Originally Posted by LeandroJVarini
Parts:-
Thermochill PA 120.4 rad with 8x 38mm fans and 38mm shrouds in push-pull.
Thermochill PA 120.3 rad with 6x 38mm fans and 38mm shrouds in push-pull.
Long PSU (200x160x86).
4x Raptor HDD's.
2x Optical Drives.
Akasa Fan Control Pro.
Alphacool LCD Display.
2x EK reservoirs.
2x Lang D5 Pumps.
Asus Rampage Extreme.
2x ATI HD2900XT with DD FC waterblocks.
3x Dominator Memory.
Apogee GTX.
http://i277.photobucket.com/albums/k...Install-02.jpg
That is freaking awesome man
Thanks :)
wowwww
thanks, we got beautiful! if I had a case of paint well!
good luck with your project
Mick64 you have a stunning case design.
I am surprised that Silverstone has not advanced their TJ07 too this level of refinement. The triple chamber design to isolate the radiators is simply brilliant. Not to mention other features that you have thoughtfully and carefully designed as well. Extremely versatile design to say the least.
Right now I see no company providing a case that matches the style, features and capabilities of your case design. Particularly in regards to the form and simple beauty that your design evokes. Lian Li - Silverstone :up: And versatility Mountain Mods :up:
Getting back to functionality:
Fitting in two radiators at the bottom of the TJ07 has been the standard practice for years. Usually a triple rad along side a double rad. Or even a quad rad nesting with a double rad.
One rad pulling in fresh air and the other pulling the air out. Or One rad pulling in fresh air and the other rad pushing the air out. Or again One rad pushing in fresh air and the other rad pushing the air out. And so on and so on.
Fitting in two radiators at the bottom of the TJ07 is good, but still a compromise in performance - as neither radiator - is given proper access to a push/pull setup with shrouds.
I personally - do not like the idea of spending several hundred dollars on radiators and then not being able to get the performance I paid for.
Your design allows for maximizing radiator performance like no other case that I have seen on the market.
Lian Li ! Silverstone ! Mountain Mods! Step up to the plate please.
We as your customers; past, present and possibly future - Need this case.
Mick64 has just out-designed three major players in the pc case market.
Job well done Mick64 :clap:
I am waiting very impatiently to purchase this case - Silverstone. If you want more of my hard earned money you are going to have to make major improvements on the TJ07.
I DON'T NEED TWINS !
I NEED THE Mick64 UltraFlow TJ08 !
Steeeeeel.
I would order one of these immediately, regardless of cost......NICE WORK!
I would build my first watercooled PC if this case was available
Beautifull, Amazing, The Right stuff!!!
you sir have just visualized my dream case FULL STOP
I am waiting impatiently to see who will bring this to the market.
This is my first post :D
you finally got it right
the screen at the top is perfect use
other than that fan controller you could switch out its perfect
in the red one the mobo looks inverted i think ?
lets get a window shot on both :D
I'm more and more amazed every update. I've been considering the W/C plunge and this case would do it for me. Any of you vendors out there please take note and get this thing to market. Silverstone could do it. Perhaps we can get Redbeard at Corsair to take a peak for their new chassis line?
Yeah I really like this desgin. It's very well planned out, and precise. I think this would sell if it was on the market. So get selling!
which case has inspired you ?!
maybe i think about to build this one :/
Added some tubing. Two simple loops, one for the CPU and the other for the GPU's. Personally, I would also add motherboard cooling to the CPU loop as well, but haven't got time to add those in my render. Used black tubing with compression fittings. Kept the red theme, as I think it goes well with the motherboard and graphics cards....
http://i277.photobucket.com/albums/k...I-Piped-02.jpg
Apologies, if you've already seen this in my other thread...;):rolleyes:
That look's terrific dude. I must say though, it is humongous lol.
To make it more overkill, better yet make another loop on NB/SB and the memory :D
so do you have any plans on getting this manufactured?
Check Watercoolinguk forum. Marcus from watercoolinguk is working with Mick on the potential possibility in fabricating this case. It looks like Marcus will have a prototype in the near-ish future...
Yes this is true, but it's a long way from being a prototype! Don't get your hopes up just yet. Even if the prototype gets built, it doesn't mean that it will be available to purchase. I'm keeping my fingers crossed that this will be the final outcome, though! :)Quote:
Originally Posted by Economist