DFI Lanparty UT P45-T2RS Banter starts here!!!

Finally, I got the goods. But there are always problems, always something in the way. Missing a DVI/VGA converter and only have a stock cooler that is almost sitting there because of its own weight. Cant get it in place because I cant remove the backplate from my water setup (super strong glue back there)

Still, I got good results with temps goin no higher than 75'C and really cramped space and getto solutions for a lot of problems (will take a oic some day, lol)

I am not finished yet, and I know this will kick ass under water when I get back home after holidays (on the move with all the parts right now) 5GHz is with in my reach

Went to beta BIOS and got a nice surprise :)


4.325 -- 480x9 and shes got plenty more where that came from ;)
1.376vCore
http://valid.canardpc.com/show_oc.php?id=464589

Hello,

the DFI is a very nice board. I test a Q9550 at FSB 470, it was very hard to be stable. FSB 500 is to heavy at the moment!

FSB 470 looks very nice:

http://www.abload.de/thumb/q95501248v10haztp.jpg

Can anyone give my Tips for get FSB 500 stable?

Sorry for my bad english, i leave the scool for 10 years ago :D!

raise your vtt voltage to ~1.35 and you will reach higher FSB

I test it this weekend, VTT 1,35 is very high.

Anyone know when DFI release a new Bios?

Quote:

---

Originally Posted by SOXX

I test it this weekend, VTT 1,35 is very high.

Anyone know when DFI release a new Bios?

---

not really at all. some run up to 1.5vtt 24/7

I dont believe it to be dangerous. I've been benching this weekend with 1.55VTT

OK, i will test it. My rig runs 24/7 with the settings in the screen, I think thats a very nice result.

anybody tried running crossfire on this board? i've seen a lot of people running crossfire on the JR counterpart, maybe this board can do better?

Quote:

---

Originally Posted by emoners

anybody tried running crossfire on this board? i've seen a lot of people running crossfire on the JR counterpart, maybe this board can do better?

---

I'm doing 4870x2 + 4870 512mb benching as we speak :D

heres the first result http://service.futuremark.com/compare?3dm06=9268247

thanks SNiiPE_DoGG...any issues with that combo (4870x2 + 4870)? which lanes are you using by the way?

Quote:

---

Originally Posted by emoners

thanks SNiiPE_DoGG...any issues with that combo (4870x2 + 4870)? which lanes are you using by the way?

---

using 8x8, havent played games on the test bench so I cant say if theres an issue

heres the vantage trifire result, I pleased with it and I havent even voltmodded the x2 yet :shocked:

http://service.futuremark.com/compare?3dmv=604646

Quote:

---

Originally Posted by SNiiPE_DoGG

I'm doing 4870x2 + 4870 512mb benching as we speak :D

heres the first result http://service.futuremark.com/compare?3dm06=9268247

---

nice
does it perform close to 3 4870s ?
you sick makin me wanna do trifire:rofl:

Quote:

---

Originally Posted by zsamz_

nice
does it perform close to 3 4870s ?
you sick makin me wanna do trifire:rofl:

---

never used 3 4870s so I dont have a comparison, I can tell you though that the trifire is extra broken in extreme vantage preset, I only scored x5950 lololol:rofl:

Hey guys

Is it worth selling my Biostar I45 and getting the DFI LP DK P45-T2RS(ABS) Intel P45 Chipset OR if i can, get the DFI LP UT P45-T2RS

@SNiiPE_DoGG: what's your settings on that Quad?

Quote:

---

Originally Posted by emoners

@SNiiPE_DoGG: what's your settings on that Quad?

---

I'll get you a full bios template in like ~4 hours :up:

Are these boards still being sold in the US? I'm not seeing any results for the UT variant on Froogle and Newegg has deactivated their listing. :(

Edit: Referring to the T2RS. I remember similar activity with retail inventory when the X48/X38-T2R were released. Hopefully this is the same deal.

Quote:

---

Originally Posted by Gogeta

Are these boards still being sold in the US? I'm not seeing any results for the UT variant on Froogle and Newegg has deactivated their listing. :(

---

very odd. I bought mine last week.....

You might want to call motherboard pro and ask them, they definitely will have the inside scoop on this situation.

Full BIOS template for the beta bios on the
P45 T3RS

Note: not fully prime stable, 3D and OCCT 1hr stable

Code:

---

>CPU Feature:
 
Thermal Management Control.......... - Disabled
PPM(EIST) Mode...................... - Disabled
Limit CPUID MaxVal.................. - Disabled
CIE Function........................ - Disabled
Execute Disable Bit................. - Enabled
Virtualization Technology........... - Enabled
Core Multi-Processing............... - Enabled
 
>DRAM Timing:
 
Enhance Data transmitting........... - Fast
Enhance Addressing.................. - Fast
T2 Dispatch......................... - Disabled

>Clock Setting Fine Delay Press Enter:

DLL And RCOMP Settings.............. - Manual
Ch1 Dram Defaul Skew................ - Model 1
Ch2 Dram Defaul Skew................ - Model 1
RCOMP Settings...................... - Model 1

Fine Delay Step Degree.............. - 70ps

Ch1 Clock Crossing Setting.......... - Agressive
DIMM1 Clock Fine Delay.............. - Current[1346ps]
DIMM2 Clock Fine Delay.............. - Current[1346ps]
Ch1 Control0 Fine Delay............. - Current[166ps]
Ch1 Control1 Fine Delay............. - Current[166ps]
Ch1 Control2 Fine Delay............. - Current[124ps]
Ch1 Control3 Fine Delay............. - Current[110ps]
Ch1 Command Fine Delay.............. - Current[262ps]

Ch2 Clock Crossing Setting.......... - Agressive
DIMM3 Clock Fine Delay.............. - Current[1346s]
DIMM4 Clock Fine Delay.............. - Current[1346ps]
Ch2 Control0 Fine Delay............. - Current[14ps]
Ch2 Control1 Fine Delay............. - Current[56ps]
Ch2 Control2 Fine Delay............. - Current[0ps]
Ch2 Control3 Fine Delay............. - Current[0ps]
Ch2 Command Fine Delay.............. - Current[110ps]

Ch1 Ch2 Common Clock Setting........ - Auto

Ch1 RDCAS GNT-Chip Delay............ - Auto
Ch1 WRCAS GNT-Chip Delay............ - Auto
Ch1 Command To CS Delay............. - Auto
.
Ch2 RDCAS GNT-Chip Delay............ - Auto
Ch2 WRCAS GNT-Chip Delay............ - Auto
Ch2 Command To CS Delay............. - Auto

Flex Memory Mode..................... - Auto
Common CMD to CS Timing.............. - 2N
CAS Latency Time (tCL)............... - 7
RAS# to CAS# Delay (tRCD)............ - 8
RAS# Precharge (tRP)................. - 8
Precharge Delay (tRAS)............... - 22
All Precharge to Act................. - Auto
REF to ACT Delay (tRFC).............. - Auto
Performance Level.................... - 8

>Read delay phase adjust Press Enter:

Channel 1 Phase 0 Pull-In........... - Auto
Channel 1 Phase 1 Pull-In........... - Auto
Channel 1 Phase 2 Pull-In........... - Auto
Channel 1 Phase 3 Pull-In........... - Auto
Channel 1 Phase 4 Pull-In........... - Auto

Channel 2 Phase 0 Pull-In........... - Auto
Channel 2 Phase 1 Pull-In........... - Auto
Channel 2 Phase 2 Pull-In........... - Auto
Channel 2 Phase 3 Pull-In........... - Auto
Channel 2 Phase 4 Pull-In........... - Auto

Write to PRE Delay (tWR)............ - Auto
Rank Write to Read (tWTR)........... - Auto
ACT to ACT Delay (tRRD)............. -Auto
Read to Write Delay (tRDWR)......... - Auto
Ranks Write to Write (tWRWR)........ - Auto
Ranks Read to Read (tRDRD).......... - Auto
Ranks Write to Read (tWRRD)......... - Auto
ALL PRE to Refresh.................. - Auto

>Voltage Settings:

CPU VID Control..................... - 1.25V
CPU VID Special Add................. - Disabled
CPU VID Special Add................. - 113.22%
DRAM Voltage Control................ - 1.87v
SB Core/CPU PLL Voltage............. - 1.75v
NB Core Voltage..................... - 1.55v (1.47v actual)
CPU VTT Voltage..................... - 1.58v
Vcore Droop Control................. - Disabled
Clockgen Voltage Control............ - 3.45v
GTL+ Buffer Strength................ - Strong
CPU GTL 0 REF Volt.................. - 0.6725
CPU GTL 2 REF Volt.................. - 0.6725
CPU GTL 1 REF Volt.................. - 0.6725
CPU GTL 3 REF Volt.................. - 0.6725
North Bridge GTL 0 REF Volt......... - 0.6750
North Bridge GTL 1 REF Volt......... - 0.6750
FSB Vref............................ - Auto
 
Genie BIOS Settings:
 
Exist Setup Shutdown................ - Mode 2
Exist Shutdown After AC loss........ - Enabled
AC Shutdown Free.................... - Enabled
O.C Clock Fail Retry Counter........ - 1
O.C Clock Fail CMOS Reloaded........ - Disabled
CPU Clock Ratio..................... - 9
Target CPU Clock.................... - 3800 MHz
CPU Clock........................... - 482
Boot Up Clock....................... - Auto

CPU Clock Amplitude................. - 900mV
CPU Clock0 Skew..................... - 100ps
CPU Clock1 Skew..................... - 100ps
DRAM Speed.......................... - 400/1066
Target DRAM Speed................... - 1284MHz
PCIE Clock.......................... - 101mhz

---

How do you get that printout of BIOS settings?

Quote:

---

Originally Posted by DavidNJ

How do you get that printout of BIOS settings?

---

You don't, its just made up in notepad.

Copy & paste the template into notepad & edit it with your settings.

Then to display them here on the thread type

[ code ] (without the spaces)

paste in your settings then type

[ /code ] (without the spaces)

EK has waterblocks for the northbridge, southbridge, and power circuits, allowing you to remove the stock components and water cool. The northbridge and CPU Buck converter appears to run hot.

Quote:

---

Originally Posted by DavidNJ

EK has waterblocks for the northbridge, southbridge, and power circuits, allowing you to remove the stock components and water cool. The northbridge and CPU Buck converter appears to run hot.

---

I will be completely watercooling this board, pics will be in my worklog in a few days

My Board is complete under water!

http://www.abload.de/thumb/bs6.jpg87if.jpg http://www.abload.de/thumb/bs7.jpg0cjf.jpg http://www.abload.de/thumb/bs8.jpgsaus.jpg http://www.abload.de/thumb/bs9.jpg3fpp.jpg http://www.abload.de/thumb/bs10.jpgd4j5.jpg http://www.abload.de/thumb/bs11.jpgj8fo.jpg http://www.abload.de/thumb/bs12.jpgn08h.jpg

The set is made in Germany by Mips Computer!