[Team.AU] Gigabyte GA-EP45T Extreme - P45 DDR3 Monster

Printable View

Show 100 post(s) from this thread on one page

10-09-2008, 09:06 AM
Pt1t

Quote:

Originally Posted by boostedevo

Where?

Here : EP45TEXTREME F5B
10-09-2008, 09:15 AM
boostedevo

Thank you Pt1t :up:
10-09-2008, 10:30 AM
Achill3uS

any info about the updates?
for me the F4f performs still really nice, no issues :)

max fsb updated with new chip, still on air: 665.84 MHz :D
10-09-2008, 10:43 AM
Supershanks

Yep I see details here 06.10.08
GA-EP45T-Extreme - TestBeatBIOS F5b But no download link ??
10-09-2008, 06:08 PM
irenic

huu too bad i cant try.. my ep45t extreme just simply unconcsious back from GOOC.. with my p5e3 premium has just been sold, i might stick to lappie first and wait for nehalem :(
10-09-2008, 08:29 PM
[XC] gomeler

Funny, mine died in it's box after not being used for ~10 days :D I think there are gremlins in my house benching while I sleep :shakes:
10-14-2008, 07:04 PM
Alcibiades

Revisited my brothers EP45T-EXTREME
flashed to bios F5B

Once again OCZ doesn't let me down doing 2000Mhz easy with 333 and 400 memory straps

http://i105.photobucket.com/albums/m...2000ddr3-1.gif

Code:

GIGABYTE GA-EP45T_EXTREME [u]MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Turbo CPU Clock Ratio ..........................: 8 Fine CPU Clock Ratio.....................: CPU Frequency ...........................: 4000Mhz Clock Chip Control Standard Clock Control CPU Host Clock Control..................: [Enabled] CPU Host Frequency (Mhz) ............: 500Mhz PCI Express Frequency (Mhz) .........: 103Mhz C.I.A. 2.............................:[Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive...........................: 900mv PCI Express Clock Drive...................: 900mv CPU Clock Skew (ps).......................: 300ps MCH Clock Skew (ps).......................: 300ps DRAM Performance Control Performance Enhance....................: [Turbo] Extreme Memory Profile (X.M.P.)........: (G)MCH Frequency Latch.................: [Auto] System Memory Multiplier ..............: 4.00B Memory Frequency (Mhz) ..............: 2000Mhz DRAM Timing Selectable ................: [Manual] [Auto] Standard Timing Control CAS Latency Time...............................: 9 tRCD ..........................................: 9 tRP'...........................................: 9 tRAS...........................................: 30 Advanced Timing Control [Press Enter] tRRD...........................................: 13 tWTR...........................................: 15 tWR............................................: 13 tRFC...........................................: 72 tRTP...........................................: 8 Command Rate (CMD) ............................: Auto Channel A Channel A Timings Settings [Press Enter] Static tRead Value......................: 8 tRD Phase0 Adjustmen...................:Auto tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)..................: 9 Twr2wr(Different Rank)..................: 9 Twr2rd(Different Rank)..................: 8 Trd2wr(Same/Diff Rank)..................: 10 Dimm1 Clock Skew Control................:Auto ps Dimm2 Clock Skew Control................:Auto ps DDR Write Leveling..........................: Enabled DDR Write Training..........................: Enabled Channel A Driving Settings [Press Enter] Driving Strength Profile:[AUTO] Data Driving Pull-Up Level.............:Auto Cmd Driving Pull-Up Level..............:Auto Ctrl Driving Pull-Up Level.............:Auto Clk Driving Pull-Up Level..............:Auto Data Driving Pull-Down Level...........:Auto Cmd Driving Pull-Down Level............:Auto Ctrl Driving Pull-Down Level...........:Auto Clk Driving Pull-Down Level............:Auto Channel B Channel B Timings Settings [Press Enter] Static tRead Value.........................: 8 tRD Phase0 Adjustmen...................:Auto tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)...................: 9 Twr2wr(Different Rank)..................: 9 Twr2rd(Different Rank)...................: 8 Trd2wr(Same/Diff Rank)..................: 10 Dimm1 Clock Skew Control................:Auto ps Dimm2 Clock Skew Control................:Auto ps DDR Write Leveling..........................: Enabled DDR Write Training..........................: Enabled Channel B Driving Settings [Press Enter] Driving Strength Profile:[AUTO] Data Driving Pull-Up Level.............:Auto Cmd Driving Pull-Up Level..............:Auto Ctrl Driving Pull-Up Level.............:Auto Clk Driving Pull-Up Level..............:Auto Data Driving Pull-Down Level...........:Auto Cmd Driving Pull-Down Level............:Auto Ctrl Driving Pull-Down Level...........:Auto Clk Driving Pull-Down Level............:Auto {U]Motherboard Voltage Control{/U] Voltage Type.…...……... Normal CPU CPU Vcore….………...........................: 1.3625v CPU Termination…...... 1.200V*...........: 1.300v CPU PLL………………….........1.500V*...........: 1.500v CPU Reference 1...............................: 0.841v CPU Reference 2...............................: 0.863v MCH/ICH MCH Core……………..........1.100V............: 1.420v MCH Reference..…...….….0.750V............: 0.723v MCH/DRAM Reference.....0.750V............: 1.000V ICH I/O…………....……......1.500V............: 1.500v DRAM DRAM Voltage ……........1.500V............: 1.800v DRAM Termination ...…..0.750V............: 1.000v Channel A Data Vref ...0.750V.............: 1.000v Channel B Data Vref ...0.750V.............: 1.000v Channel A Address Vref 0.750V.............: 1.000v Channel B Address Vref 0.750V............: 1.000v [b]{U]Advanced Settings[b]{U] Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Disabled] CPU Enhanced Halt (C1E)................: [Disabled] C2/C2E State Support....................: [Disabled] x C4/C4E State Support..................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.........................: [Disabled] Virtualization Technology................: [Disabled]
10-20-2008, 07:20 AM
antoine76

My "700mhz dual core actived ready EP45T-Extreme" is dead :(

So, are newers boards based on the rev A3 of P45 ?
10-21-2008, 01:06 PM
NapalmV5

sorry guys but far from "extreme" dq6 deserves to be dubbed extreme

1.80vtt @ extreme

1.94vtt @ dq6

so much for extreme

the cpu part of the mobo is good but the culprit is the ddr3

im able to system boot q9650 up to 4.8ghz 534x9 but no os boot @ 4.8 neither @ 4.5

ive tried different ratios/mem timings vdimm @ 2.5 actual 2.7

you guys have any suggestions/recommendations/tips/what not on how i can get it to os boot on my 2 x 1GB supertalent 2000ddr3

im deciding whether to get more ddr3 kits or just get another dq6 and be done with it..
10-21-2008, 05:33 PM
T_M

Quote:

Originally Posted by NapalmV5

the cpu part of the mobo is good but the culprit is the chipset

Correction
10-21-2008, 05:39 PM
dinos22

Quote:

Originally Posted by antoine76

So, are newers boards based on the rev A3 of P45 ?

my one is

http://www.xtremesystems.org/forums/...d.php?t=202411
11-10-2008, 12:08 PM
kubinek

anyone info about quad and ddr3 fsb-performance?

hello,
this board interests me .
has someone over quad cpu's (like q9650) and ddr3 (like Pc3-16000 Dimms) performance information about FSB trough the NB and Dimms?

regards
achim
11-10-2008, 10:17 PM
T_M

Yes,people have overclocked quads on this board.
Most recently NightRaven broke a 3DMark WR in 06 on it.
11-10-2008, 10:27 PM
BulldogPO

Any new bios out?
11-10-2008, 10:34 PM
stasio

GA-EP45T-EXTREME - F5c
11-12-2008, 05:28 PM
x2s3w4

Quote:

Originally Posted by kubinek

hello,
this board interests me .
has someone over quad cpu's (like q9650) and ddr3 (like Pc3-16000 Dimms) performance information about FSB trough the NB and Dimms?

regards
achim

I gave up on my E8600 and got a Q9550 and it clocks pretty good on this board. I guess I just had an awful E8600 OCer.
My Q9550 can get up to 4.2 at only 1.45vcore and is stable at 4.0.
I didn't take another shot of it after an hour however I plan on running Orthos again this weekend after more tweaking.

http://i244.photobucket.com/albums/g...epol/Q9550.jpg

I noticed something else on this board. I guess the new E0 stepping is equipped with some new power saving features. The E0 has C1E, C2E and C4E I guess it's progressively a better power saving feature in the BIOS. When I put the Q9550 C0 stepping those features went away except for the C1E that's been around for a while.
Either that or it's just available for dual core and not quad core.

http://i244.photobucket.com/albums/g.../copm45007.jpg
http://i244.photobucket.com/albums/g.../copm45002.jpg
06-04-2010, 11:08 AM
The_Game

The thread is old but some are still beching this awesome board :D. Some results with mu CPUs on SS phase change and NB with stock cooling + fans.

Q9650 4.7GHz small prime95 test - http://img295.imageshack.us/img295/6528/quadprime1.jpg

And some tests with the magic F4f BIOS

692fsb - http://valid.canardpc.com/show_oc.php?id=1222769 :up:

E8400 @6GHz validated - http://valid.canardpc.com/show_oc.php?id=1222852

E8200 @5360MHz validated - http://valid.canardpc.com/show_oc.php?id=1222958 (cant go higher even with lower multy. Very good chip but not a good one for high FSB)

775 will never die :D.
06-04-2010, 03:20 PM
Hondacity

can you post your bios settings for voltages?

thanks
06-04-2010, 05:41 PM
The_Game

GIGABYTE GA-EP45T_EXTREME
[u]MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio ..........................: 8
Fine CPU Clock Ratio.....................:
CPU Frequency ...........................: 5192Mhz
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 649Mhz
PCI Express Frequency (Mhz) .........: 101Mhz
C.I.A. 2.............................:[Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: 900mv
PCI Express Clock Drive...................: 900mv
CPU Clock Skew (ps).......................: 150ps
MCH Clock Skew (ps).......................: 0ps
DRAM Performance Control
Performance Enhance....................: [Standart]
Extreme Memory Profile (X.M.P.)........:
(G)MCH Frequency Latch.................: [Auto]
System Memory Multiplier ..............: 2.00D
Memory Frequency (Mhz) ..............: 1298Mhz
DRAM Timing Selectable ................: [Manual] [Auto]
Standard Timing Control
CAS Latency Time...............................: 8
tRCD ..........................................: 8
tRP'...........................................: 8
tRAS...........................................: 24

Advanced Timing Control [Press Enter]
tRRD...........................................: auto
tWTR...........................................: auto
tWR............................................: auto
tRFC...........................................: auto
tRTP...........................................: auto
Command Rate (CMD) ............................: 2T
Channel A

Channel A Timings Settings [Press Enter]
Static tRead Value......................: 15
tRD Phase0 Adjustmen...................:Auto
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)..................: auto
Twr2wr(Different Rank)..................: auto
Twr2rd(Different Rank)..................: auto
Trd2wr(Same/Diff Rank)..................: auto
Dimm1 Clock Skew Control................:Auto ps
Dimm2 Clock Skew Control................:Auto ps
DDR Write Leveling..........................: Enabled
DDR Write Training..........................: Enabled

Channel A Driving Settings [Press Enter]
Driving Strength Profile:[AUTO]
Data Driving Pull-Up Level.............:Auto
Cmd Driving Pull-Up Level..............:Auto
Ctrl Driving Pull-Up Level.............:Auto
Clk Driving Pull-Up Level..............:Auto

Data Driving Pull-Down Level...........:Auto
Cmd Driving Pull-Down Level............:Auto
Ctrl Driving Pull-Down Level...........:Auto
Clk Driving Pull-Down Level............:Auto

Channel B

Channel B Timings Settings [Press Enter]
Static tRead Value.........................: 15
tRD Phase0 Adjustmen...................:Auto
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)...................: auto
Twr2wr(Different Rank)..................: auto
Twr2rd(Different Rank)...................: auto
Trd2wr(Same/Diff Rank)..................: auto
Dimm1 Clock Skew Control................:Auto ps
Dimm2 Clock Skew Control................:Auto ps
DDR Write Leveling..........................: Enabled
DDR Write Training..........................: Enabled

Channel B Driving Settings [Press Enter]
Driving Strength Profile:[AUTO]

Data Driving Pull-Up Level.............:Auto
Cmd Driving Pull-Up Level..............:Auto
Ctrl Driving Pull-Up Level.............:Auto
Clk Driving Pull-Up Level..............:Auto

Data Driving Pull-Down Level...........:Auto
Cmd Driving Pull-Down Level............:Auto
Ctrl Driving Pull-Down Level...........:Auto
Clk Driving Pull-Down Level............:Auto

{U]Motherboard Voltage Control{/U]
Voltage Type.…...……... Normal
CPU
CPU Vcore….………...........................: 1.62v
CPU Termination…...... 1.200V*...........: 1.600v
CPU PLL………………….........1.500V*...........: 1.500v
CPU Reference 1...............................: auto
CPU Reference 2...............................: auto
MCH/ICH
MCH Core……………..........1.100V............: 1.64v
MCH Reference..…...….….0.750V............: auto
MCH/DRAM Reference.....0.750V............: auto
ICH I/O…………....……......1.500V............: auto
DRAM
DRAM Voltage ……........1.500V............: 1.8v
DRAM Termination ...…..0.750V............: auto
Channel A Data Vref ...0.750V.............: auto
Channel B Data Vref ...0.750V.............: auto
Channel A Address Vref 0.750V.............: auto
Channel B Address Vref 0.750V............: auto

[b]{U]Advanced Settings[b]{U]
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Disabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Disabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Enabled]

It was something like that the freq I booted and rising with ET6 for more. Most voltages on auto I was too lazy to set all manual :D. Not sure for the MCH Core 1.64 or 1.7v for 692 fsb, but for sure its working with 1.56 about 670. Also 670 Pl10 not a problem with memory 1340 @5-5-5-15, just left it 15 to be sure it is not stopping me.
06-04-2010, 05:50 PM
Hondacity

hahahha lazy auto....

thank you very much..i appreciate the help....

last night was a terrible 5.4ghz run lol...

i'll try again later.....

many thanks again
06-04-2010, 08:53 PM
The_Game

The most important settings are CPU/MCH clock skews and of course VTT. For dual core keep the diffrence at 150. For example CPU clock skew 150, MCH clock skew 0, or CPU 300, MCH 150(CPU 200 or MCH 50 just experiment. I have tested about 4-5 diffrent 8xxx CPUs all of them are working fine with 150 diffrence between CPU and MCH skew and no problem reaching 650FSB which was the maximum with F4 BIOS). CPU termination 1.6v is the perfect one if u are lazy to try MCH reff manually like me :D if u are not u can try to set it and eventually u ll lower the VTT. And for sure if u are going for fsb u have to use F4f BIOS I tried many and cant go over 650-660 with other one. Also keep 2.00D for the memory if u get the right settings u can try for higher RAM multi :).
Good luck!

One Super pi shot at 671fsb
http://img684.imageshack.us/img684/6097/671shinapi.jpg
The time is bad I was just trying the max FSB. I think it can past even higher may be 680 fsb the CPU maximum is arround 5750-5800MHz, didnt tried with lower multy.
06-17-2012, 05:20 AM
rizla3066

Quote:

Originally Posted by hicookie

ISL6336, from this layout, FB is #16, Vdiff is #17
give a resistor between this 2 pin, you can fix loadline calibration

prepare a 5kohm vr, connect to Pin#16 & Pin#17
using meter to measure it , oringinal should be 45.5k
turn it to 1.5~1.8k, depend on what loading.

http://img151.imageshack.us/img151/2519/dsc02582qw4.jpg

http://img382.imageshack.us/img382/237/dsc02583uu3.jpg

Hicookie

does this mod work of the ddr2 model? GA-EP45-EXTREME

Show 100 post(s) from this thread on one page