Bowmans Mod Shop

Well i always ghost anyways.

thats the first thing a bencher does.get a clean setup at default speeds and then ghost.saved me countless times.it is just i dont have a clean image for the nf7 abit board.

as far as temps goes you cannt go by the motherboard thermistor.i thought every living sole knew that.the thermistors abit and epox are not worth a penny at cold temps.
i was in my bios last night and it shows a cpu temp of -74f which is impossable,i trust no socket temp thermisitor.
i have such good contact the board had ice once midway between the chipset and cpu towards the ram.i placed some foam to cover and seal it.but i had to keep a strong fan blowing on it to keep the moisture evaperated until i can get in there to protect the upper half the board better.

anyways we will see later it it even starts back up.you never know with these extreeme machines

Use the heater from you vapo ;] Think it will work nicelly on the mobo's chipset

The termistor on the 8rda3+ show really nice temps, but ill buy a MAX controller

Quote:

---

Well i always ghost anyways.

thats the first thing a bencher does.get a clean setup at default speeds and then ghost.saved me countless times.it is just i dont have a clean image for the nf7 abit board.

---

Damn i have to start using ghost... Anyway i got 19.2k on my fx (here) on my half dead system (sobix + blaster and other god damn things + corruptions caused by testing) and no o/c on the vga

ill maybe have my hoses on friday

max controller?

you connect it to the smbus and directly to athlons thermal diode

ok I got ya now, thanks berkut

MickeyMouse - believe he's testing out JC's old 1700+ at the moment.

Frost Miester....

Yipper. Cat 3.6's and all the raw Mhz
you can get ahold of.

Here's some 3DMark reading:

http://www.madshrimps.be/forums/show...s=&threadid=96

P.S.

If you need an unmodded NF7 V2.0 that'll give you
250 FSB any time you need it... I'll loan you mine.
d10 BIOS will get ya there.

well got a fresh install loaded and then i started getting errors...guess what?condensationdripping into the video card.i am having to take the board out and reinsulate the upper half the board.with all 3 evaps the board itself gets cold to the touch almost to the ram slots.....
so it coming down now.i hate tearing it back down.


o well thats what i get for making the thing cold.more worklike always....

I know it's more work....but it's not really work, it's the R&D that everyone is waiting for...it's the Leading edge of phase change technology...it's just more Bowman!!! The best is coming soon!! :)

yah its hard to believe ur the first to do this.....

Im more and more liking dabits vacuum box setup for condensation reasons and rma reasons, itll be all good once setup.

]JR[

well got the upper half insulated last night.and had time for one bench....ran a 21798 the first and only bench i ran.got too late.but for some reason now after the new windows install it wont run at 3013mhz,not sure what that is but i will work on it later.

condensation is a problem when you cool the chipset down.the cold just travels the board. right to the agp slot.i have been lucky so far that i catch it before it took out my card.

JR yep i like the vacuum box more and more,

How are you insulationg your board? I have 2 that I would like to have done for the prommie (Bowman Modded) and Crossbow.
I want to be able to RMA them if needed....what do you suggest?
Thanks :D

Quote:

---

Originally posted by TheDude
How are you insulationg your board? I have 2 that I would like to have done for the prommie (Bowman Modded) and Crossbow.
I want to be able to RMA them if needed....what do you suggest?
Thanks :D

---

i will post a good pic tonight,sorry just been busy trying to get the new triple going and kidds started school this week so has been a interesting week.

:off: What happened to phase-change.com ?

Quote:

---

Originally posted by berkut
:off: What happened to phase-change.com ?

---

dont know i was there a couple of hours ago,was working fine.i will pm fredperry.

Quote:

---

Originally posted by berkut
:off: What happened to phase-change.com ?

---

I see your boggle, its lost its domain too :/

]JR[

well ok i promised a pic of the board insulated here it is.

one more little thing...i did get a score tonight for the orb...not bad on a 9700 pro..but i will have to tweek it alot more.

Superb job there Master Bowman..

baker18

goddamn lol whered the mobo go? all i see is neopreme;)

Clear!!!...Cleared for take off!...Ready to fly!..............:)

i love the way u made those plexi glass tops to hold the blocks on;) and also the green one on the 9700;) what are u gettin for an oc on the core? ne higher then 479?

well i was a volt modder way before i started refrigerant cooled pc's. so the r9700 is running......as far as i know this is one of the fastest core speeds....506core. memory never was much 353.

yea thanks MickeyMouse that was the 4th ot 5th bench it ran.but i am starting to have the cannot publish problem again...i remember now how much of a headache it was....it is proberly the timming.
i am running only 2950mhz seams i cannt run any higher because i am pulling to many amps though the board.i can lower any voltage and then increase another.but i am tring to push the memory as high as possable.right now it is running 2 2 2 11 @227 x 13.i may have to back off some of the timming some to clear a publishable score.

not sure how much i will get done this weekend,but i have a mach II to mod and finish,and another custom one for a man.

i will keep you guys posted.

Good to see you benching again! :D
:toast: