D-tek nozzles

Printable View

Show 100 post(s) from this thread on one page

10-25-2007, 08:00 PM
iadstudio

so are you saying the entire gasket is silicone?
10-25-2007, 08:03 PM
Petra

Quote:

Originally Posted by maxwedge

Looks to me like an assembly line procedure to simplify assembling them but what the hey...if it don't leak then it's ok.

That's exactly what it is... you get a prize :) (and, no, it's not cake)

:oscar: <-- prize :p:
10-25-2007, 08:29 PM
Martinm210

Quote:

Originally Posted by Petra

That's exactly what it is... you get a prize :) (and, no, it's not cake)

:oscar: <-- prize :p:

:rofl: :ROTF:
10-25-2007, 08:34 PM
axemanrio

Any idea where the nozzle kits are available in UK?
10-25-2007, 08:47 PM
Waterlogged

Quote:

Originally Posted by maxwedge

No it's silicone. I work with the stuff. Looks to me like an assembly line procedure to simplify assembling them but what the hey...if it don't leak then it's ok.

I just don't believe in using silicone with a good rubber gasket.

...and if I had to venture a guess as to which silicone, it'd be RTV Black from Permatex.
10-25-2007, 08:58 PM
911us

I got 2 packs from Petra this week and I planned to use them for my 2 quads but it seem like no improvement throught some reports.Should I install quad nozzles ?
10-25-2007, 09:16 PM
maxwedge

Quote:

Originally Posted by iadstudio

so are you saying the entire gasket is silicone?

No, the gasket is rubber its just that it's glued to the top with black silicone which is unnecessary with a rubber gasket. It's no big deal, I was just stating something I'm seeing and I don't know if they all came that way. I'll take a pic after work tomorrow.

Quote:

Originally Posted by Waterlogged

..and if I had to venture a guess as to which silicone, it'd be RTV Black from Permatex.

If I could tell that (brand) then I could make a lot more money than what I do now doing something else.:rofl:
10-25-2007, 09:53 PM
iadstudio

ooooooooooh. Someone told me it was an injection molded washer. I saw the silicone mess just the same and shaved it away after I took the block apart. That makes more sense. Thanks for the explanation.

BTW. Not saying I know this first hand or anything, but a little solicone in your DDC impeller might make it pretty noisy and cause you to think it's failing. Just saying, it could happen :rolleyes:
10-26-2007, 02:55 AM
pH(x)

Quote:

Originally Posted by Waterlogged

If your referring to the DDC, it most certainly is NOT submersible. If it still runs at full RPM's, consider yourself very fortunate. I have an AC top that toasted 1 DDC and 50% toasted another one before I found the hole that force fed PC Ice down the screw hole next to the outlet. The first pump is totally torched and is unrepairable, the other might be salvageable but I don't know if I can be bothered.

I will check the RPM monitor and report back. I am surprised -- as I am almost sure that I read the original pump in its design was submersible, but it does stand to reason that once you change the design from that flush molded plastic top to delrin the properties of the pump change quite significantly :o
10-26-2007, 06:23 PM
Monk0101

Looks like Petra has the Nozzles back in stock. But, now they are out of the Yate Loons that I was going to get at the same time, to save on shipping. Just isn't my day!
10-26-2007, 07:07 PM
Petra

Quote:

Originally Posted by Monk0101

Looks like Petra has the Nozzles back in stock. But, now they are out of the Yate Loons that I was going to get at the same time, to save on shipping. Just isn't my day!

The Yates should be arriving next week... Hopefully Swiftech will pull things together and send us some DDC's by then :rolleyes:
10-26-2007, 07:17 PM
RubberDuck

Quote:

Originally Posted by Petra

The Yates should be arriving next week.

Sweet :yepp: I've been waiting for them to come in to stock.

Thx Petra :up:
10-26-2007, 08:24 PM
shabranigdo

Does the quad nozzle produce much restriction?
10-27-2007, 04:33 AM
Xilikon

Quote:

Originally Posted by Monk0101

Looks like Petra has the Nozzles back in stock. But, now they are out of the Yate Loons that I was going to get at the same time, to save on shipping. Just isn't my day!

Me neither... I wanted to order a FM121 fan myself and I realized I forgot to buy PTNuke from NCIX but they are out of stock... It's almost impossible to get wc parts like we do grocery :shocked:
10-27-2007, 12:16 PM
louie101086

finally got my nozzles i cant wait to test it out on my quad o and i didnt use that weak gasket dtek included i used an o-ring so my fuzion is bowed and nozzled
10-27-2007, 01:26 PM
winston856

I just ordered a Fuzion with nozzles for my Quad, so I'm hoping to see how that quad nozzle performs :)
10-28-2007, 12:10 PM
ante_ante

I just ordered a D-tek fuzion with nozzles from sidewinders.Is there different nozzles out there for dual and quad core ?
10-28-2007, 02:46 PM
the highlander

well my report perse, after a few adjustments, which where radiator placement, I dropped about 7ºC. I can't say that this was all because of the nozzles but i guess that changing a few things did the trick... Its recommended.. I still have split temps... no way to get them close..

at idle i have 34 34 26 28
HOT 54 54 46 46 From 67 67 58 58
10-29-2007, 01:28 AM
peebee

Quote:

Originally Posted by the highlander

at idle i have 34 34 26 28
HOT 54 54 46 46 From 67 67 58 58

So I am not the only one, having core-differences like that! :rolleyes:

some Waterblocks have it very bad, some not so. But yours are very worse. Is that normal? Looks like yor Waterblock is not mounted that well. Or the cores must have a horrible contact to the IHS :shrug:

The nozzles are not available in germany. Is there a shop with low shipping-costs to germany (letter or something?) The nozzles are very small and I wouldn´t like to pay 10-15€ for shipping of tiny plastic washers :shrug:
10-29-2007, 02:16 AM
TopherTony

also some chips are different that way as well. I have a quad back in detroit that no matter which water block, or air hsf i mount with, cores 0 and 4 are hotter than the others. Not the mobo either cuz I swapped that out as well
10-29-2007, 05:52 AM
peebee

Ah okay, that might be possible. Just made the experience, that some Waterblocks do it better and some do it not.

Well how bout nozzles and the o-ring for germany? I really would like to figure this out. No shop in germany has them available yet. Any shop there sending out by postmail or anything like that?
10-29-2007, 06:13 AM
Marci

www.over-clock.com (UK based) has them in stock and will ship to Germany...
10-29-2007, 06:36 AM
peebee

Yeah, thanks a lot Marci! :)

Just ordered them now! :up:

Anybody could tell me, what nozzles I really should try at the Q6600 and which are not necessary to test at all?

I have a non-restrictive Flowmeter and can compare the flow rates.
Radiator only is about 520l/h. Radiator with D-Tek is about 450l/h

Which nozzles should be more interesting to the Q6600? Only the two smallest?
Testing al nozzles takes me too much time and time is rare :D
10-29-2007, 07:01 AM
pH(x)

It seems I've lost 17% (rough number did that calculation in my head) impeller speed from O-ring unsealed to O-ring sealed. Not sure what to account for this, we had a maximum speed of 3,008 RPM here and now the RPM cable is reporting at a maximum impeller speed of 2,434 RPM.

There is an added variable so I don't know how reliable these numbers are, the less liquid that reaches the impeller I get a few hundred more RPMs it seems from just pinching the Tygon. But I have added a few ml or 2cc of Ethylene Glycol since the O-ring was added, glycol which I did not have in the loop prior to adding the missing O-ring.
10-29-2007, 07:18 AM
peebee

So adding the O-Ring bows and Flow is decreasing?
The water is more pressed through the copper fins with the added o-ring right?

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 05:15 AM.

XtremeSystems