4 Ghz @ 1.45 Orthos Air :)
http://mekk.homeip.net/imagesharing/...2a75a318b5.jpg
Printable View
4 Ghz @ 1.45 Orthos Air :)
http://mekk.homeip.net/imagesharing/...2a75a318b5.jpg
I ALSO WANT those LOW VID bastards! ;)
E6850 SLA9U L724B056
422x9 (3800 Mhz) @ 1.5v
Aircooled Zalman CNPS 9700
Asus P5K-E - Cellshock Value PC5300
7h 23m Orthos Blend
http://img72.imageshack.us/img72/3312/blendnd1.th.jpg
is there any known temp-related bug with this cpu?
my temps are way too low...actually, at this very moment my cores idle @12 and 13°C (everest)...very strange for aircooling (Tt Beetle, max rpm)
http://img164.imageshack.us/img164/8808/tempsju4.jpg
(both logs were done under orthos)
24/7 E6850 3.9 w/F6 1.475V bios
With my high ambient of 25C, and my ultra in my loop (found out it increases load temps 6-7C by temporarily unplugging power and using old video card), I think this is going to be my best for 24/7. Though did manage to decrease load temps permanently by 3-4C by adding push fans to my PA120.3 (nexus pull fans already maxed at 740-820 RPM, dang nexus fans with incorrect specs were supposed to be 1000rpms)
Cooled with a Tuniq Tower :D
a quick 1m and 32m with 22C room temp and 1.67Vcore @ load.
Orthos@4.2Ghz@1.56v
http://i18.photobucket.com/albums/b1...dat/orthos.jpg
Cooling: Modded Prometeia Mach
My new 2nd hand purchased E6850 L720A489 on air!
http://i4memory.com/reviewimages/cpu...720A489_01.JPG
System
- Intel Core 2 Duo E6850 L720A489 Retail
- Thermalright Ultra 120 Extreme + 120x38mm Panaflo 103cfm fan + Artic Cooling MX-2 TIM
- Asus Blitz Formula 1101 bios
- 128MB Gainward FX5200 PCI
- 2x1GB Team 6400C3 Micron D9GMH in white dimm slots
- Memory cooling = 120x25mm Thermaltake 81cfm fan
- 80GB Hitachi 7K80 SATA on Promise SATA300 TX4 PCI 32bit/66Mhz controller - to allow higher PCI-E frequency for 3dmark benching in the future.
- Pioneer DVR-08 Burner
- Sony FDD
- 620W Corsair HX620 PSU
- WinXP Pro SP2
@3600Mhz at 1.312v load
Definitely, best core 2 duo cpu I have owned to date :D
http://fileshosts.com/intel/Asus/Bli...ime95_idle.png
http://fileshosts.com/intel/Asus/Bli...ime95_load.png
Try 3600 with lower vCore, or 3800 with this vCore :D.
4000 MHZ Prime @ 1.392v @ watercooled :).
http://mekk.homeip.net/imagesharing/...939dd15dbf.png
@M3kk: What's your VDIMM on that?
2.2-2.3V i dont know exactly :D.
I thought my L725A was nice...but now I see there are 6850's hitting 4Ghz under 1.4v :eek:
http://gluons.googlepages.com/tips2.JPG
What's the method for getting such low voltage performance?
L26
1.66250 vcore
24/24 7/7
watercooling max temp 56 idle temp 27
http://img151.imageshack.us/img151/8631/stableny2.jpg
im sorry but, does cpu-z even report the correct voltage for the cpu?Quote:
Originally Posted by M3kk
Yes 1.41 most certainly reports the actual (and correct) voltage :)
I gotta say, 4ghz with <1.4 vcore is very impressive :slobber:
PS M3kk what stepping is that? and what waterblock or did I read over it...
so im guessing its a vdroop problem for me then?Quote:
Originally Posted by Garrett
http://i196.photobucket.com/albums/a...puzproblem.jpg
CPU-Z and UGuru reports about the same until i open a tab for the uguru, which then shows what i set on bios, which is 1.585 instead of the 1.55 being reported
lazy, yet is is real. And yes, for you is a drop problem :). 1.55 is the ~real voltage.
Garrett, stepping G0, but you want to know the fpo :D L720A745 , and Nexxxos XP block.
Well I have a nexxxos xp block too, and a 9w laing pump complete with a pa120.3 with 6 fans push/pull but I'll never manage 40c stressed... more like 50c lol... unless it's very cold in your room lol...
I have the G0 too, L720A696 IIRC... did you lap your cpu or what :D
again: impressive job :)
:D Pick up a good chip..........:Quote:
Originally Posted by Machinus
http://img88.imageshack.us/img88/6553/4ghz1vp7.jpg
:up:
That screen is bull... :D
I can tun 3dmark06 cputest at 4000 mhz with 1.35v :D.
Quote:
Originally Posted by Garrett
There's 3 reasons to this:
1) your pumping power is girly, get the DCC+
2) lap your cpu, don't bother trying to take off the IHS in a frying pan (lol)
3) M3kk is wearing 3 coats due to freezing ambiant temps, or is he? :D
Btw, Garrett, mines goes up to 48C load and it's a B2 on a PA 120.2 with 1.408V.
Nope :D.
The ambient temp was 15-20 oC, but near 20 :).
I have an Eheim 1046 pump ( 300 L/h :D, but 1.2M lift up and dead silent :P ), in the loop i have the VGA ( 7900GT @ 1.55v ), one unused chipset block, the nexxxos XP platinum block and the nexxxos extreme III radiator, with 2 coolers :).
and a low VID chip too ;)
1.2750v :)
Ah well tonight I'm gonna pick up the DDC+ pump and prepare my build further, in another PC71 :)
PS M3kk did you or did you not lap that cpu?
Nope, its out of box, without lapping and stuff.